Aervoe
A. Y. McDonald Water Works
View:
Active Filters :
Part #:701122
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”- 25 PSIG- NOTE
Qty:
Part #:101970
- Mechanically activated, wide angle switch for direct control of pumps up to 1/2 HP at120V and 1 HP at 230V.
Qty:
Part #:503341
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
21.20
Qty:
Part #:101902
- Model 5025PVSP 1/4 HP 120 Volts 60 Hz 3.8 Amps Thermoplastic Construction 1 1/4” or 1 1/2” Size 10’ Length Cord Handling 1/8” Solids 3450 RPM Single Phase :
Qty:
Part #:200145
- SUBMITTAL INFORMATION Static Head:
- Min 2ft. / Max 10 ft. static head over check valvePressure Test
Qty:
Part #:309877
- Copper Split Bolt Connector for Two Copper Conductors - 16 Str. to 8 Str. (Equal Main & Tap)
Qty:
Part #:309890
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol. to 2/0 Str. (Equal Main & Tap)
$
6.59
Qty:
Part #:309891
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol to 3/0 Str. (Equal Main & Tap)
$
8.96
Qty:
Part #:309892
- Copper Split Bolt Connector for Two Copper Conductors - 1/0 Sol. to 250 kcmil (Equal Main & Tap)
$
10.49
Qty:
Part #:309893
- Copper Split Bolt Connector for Two Copper Conductors - 4/0 Str. to 350 kcmil (Equal Main & Tap)
$
19.37
Qty:
Part #:309942
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
0.89
Qty:
Part #:309943
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
1.66
Qty:
Part #:309944
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
2.19
Qty:
Part #:309945
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
2.19
Qty:
Part #:309946
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
2.19
Qty:
Part #:309950
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 1/0 AWG
$
1.92
Qty:
Part #:309951
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 1/0 AWG
$
1.92
Qty:
Part #:309952
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2/0 AWG
$
2.25
Qty:
$
48.45
Qty:
Part #:701356
- A.Y. McDonald Mfg. Co. No-Lead Low Pressure Valves are constructed from heavy duty no-lead brass and are recommended for residential and commercial applications and positive shut-off with various inlet configurations.:
Qty:
Part #:507402
- Technical Specs
Item Rust Treatment Color Opaque Container Size 1 qt Dry Time 20 min Application Method Brush Or Commercial Sprayer
Qty:
Part #:512443
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 20 sec Viscosity - Adhesives 45 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 495 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.1 @ 23.89 Degrees C Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General Purpose Tensile Strength 2750 psi Standards 29 CFR 1910.1200 Application Bonds Rubber, Metal and Plastic Parts with Gaps up to 0.004 in
$
5.70
Qty:
Part #:511836
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Low Threadlocker Color Purple Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Dimethacrylate Ester For Fastener Dia. Up to 1/4 in Begins to Harden 20 min Series 222MS Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application For Locking All Fasteners 1/4 in or Smaller. Removable With Hand Tools Standards ASTM D5363, MIL-S-46163A Type II Grade M, NSF P1 Certified, RoHS Certified
$
20.50
Qty:
Part #:509131
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
20.50
Qty:
Displaying: 25 - 48 of 198 Matching Items