Aervoe
A. Y. McDonald Water Works
View:
Active Filters :
Part #:101904
- Cord SolidsModel 5020PUUP 1/5 HP 120 Volts 60 Hz 3.6 Amps Thermoplastic Construction Discharge Size 1 1/4in Cord Length 10ft Solid Handling 1/8in 3450 RPM Single Phase:
Qty:
Qty:
Qty:
Part #:309911
- Copper Mechanical Lug - One Hole Offset Tongue 8 Sol. to 2 Str. CU
$
1.31
Qty:
Part #:500563
- The Original&trade Curved Jaw Locking Pliers with Wire Cutter Features
Curved jaw with built-in wire cutter great for a variety of applications and material shapes.
Classic trigger release provides maximum locking force.
Convenient wire cutter included
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
Qty:
Part #:510750
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Convenient wire cutter cuts up to a 1/4" boltLong, straight nose allows for use in narrow spaces not reachable by curved or straight jawsUse to clamp or tighten bolts or to extract items in hard-to-reach places
Qty:
Part #:500407
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Qty:
Part #:500917
- The Original&trade Locking C-Clamps with Regular Tips Features
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Qty:
Part #:500553
- The Original&trade Locking C-Clamps with Regular Tips Features
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Qty:
Part #:502900
- New Fast Release&trade Locking Clamp With Swivel Pads Features
20% Reduced Hand Span¹ improves user control and helps reduce hand strain
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work and delicate materials while reducing damage to the work surface
Redesigned tactile grip zone helps improve user control and is suited for high-temperature applications
Hex key adjusting screw tightens to adjust pressure and draws materials together, providing a more controlled release
Made with a one-handed, triggerless release that is 2X easier to open²
Built with heat treated alloyed steel for maximum durability
Backed by IRWIN Lifetime Guarantee
¹ Compared to previous VISE-GRIP® FAST RELEASE&trade design. Reduced hand span applies to 10&rdquo and 11&rdquo models only.
Qty:
Part #:707045
- No-Lead 125# Brass Threaded Fittings. Brass Hex Reducing Bushing - No-Lead
- NSF / ANSI 61-4 & NSF / ANSI 372
A.Y. McDonald Mfg. Co. No-Lead Pipe Fittings & Nipples are constructed from heavy duty brass and are rated for commerical, industrialand residential applications up to 125 WOG. Threads conform to ANSI B1.20.1 and fitting dimensions comply with ANSI B16.15.
Qty:
Part #:101970
- Mechanically activated, wide angle switch for direct control of pumps up to 1/2 HP at120V and 1 HP at 230V.
Qty:
Part #:701122
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”- 25 PSIG- NOTE
Qty:
Part #:841-585-3095001
- Features and Benifts
&bull Adaptors feature a 3/8" square drive toaccommodate socket wrench or extension&bull Designed for use with taps, reamers, screwextractors, and other tools with a square shank&bull Not recommended for cutting new threads
Qty:
Part #:500556
- The Original&trade Straight Jaw Locking Pliers Features
Straight jaws provide maximum contact on flat, square, or hex work
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Hardened teeth are designed to grip from any angle
Qty:
Part #:500557
- The Original&trade Straight Jaw Locking Pliers Features
Straight jaws provide maximum contact on flat, square, or hex work
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Hardened teeth are designed to grip from any angle
Qty:
Part #:101902
- Model 5025PVSP 1/4 HP 120 Volts 60 Hz 3.8 Amps Thermoplastic Construction 1 1/4” or 1 1/2” Size 10’ Length Cord Handling 1/8” Solids 3450 RPM Single Phase :
Qty:
Part #:200145
- SUBMITTAL INFORMATION Static Head:
- Min 2ft. / Max 10 ft. static head over check valvePressure Test
Qty:
Part #:309877
- Copper Split Bolt Connector for Two Copper Conductors - 16 Str. to 8 Str. (Equal Main & Tap)
Qty:
Part #:309890
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol. to 2/0 Str. (Equal Main & Tap)
$
6.59
Qty:
Part #:309891
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol to 3/0 Str. (Equal Main & Tap)
$
8.96
Qty:
Part #:309892
- Copper Split Bolt Connector for Two Copper Conductors - 1/0 Sol. to 250 kcmil (Equal Main & Tap)
$
10.49
Qty:
Part #:309893
- Copper Split Bolt Connector for Two Copper Conductors - 4/0 Str. to 350 kcmil (Equal Main & Tap)
$
19.37
Qty:
Part #:309942
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
0.89
Qty:
Displaying: 1 - 24 of 157 Matching Items