Allanson
A. Y. McDonald Water Works
View:
Active Filters :
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
closeout
$280.59 MSRP
$
218.41
Part #:701136
- CLOSEOUTS Only 3 Left!
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”- 25 PSIG- NOTE
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:300031
- CANTEX 5133737 is a 3/4 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces
Features
Two holes in the feet of the clamp allow mounting the screws or nails
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 & 80 conduit
UL and CSA listed
Made in USA
Requires two #10 screws for installation (not included)
$
0.26
Qty:
Part #:301277
- CANTEX 6141626 is a 1-1/4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.27
Qty:
Part #:301293
- CANTEX 6141627 is a 1-1/2 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.80
Qty:
Part #:301342
- CANTEX 6141628 is a 2 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.82
Qty:
Part #:301360
- CANTEX 5140106 is a 1-1/4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.41
Qty:
Part #:301362
- CANTEX 5140107 is a 1-1/2 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.96
Qty:
Part #:301367
- CANTEX 5140108 is a 2 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.71
Qty:
Part #:301410
- CANTEX 5133829 is a 2-1/2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
3.65
Qty:
Part #:301413
- CANTEX 5133829 is a 2-1/2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
12.63
Qty:
Part #:301441
- CANTEX 5133827 is a 1-1/2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to U
$
1.53
Qty:
Part #:301554
- CANTEX 6441002 is a 3/4 in. Enviro-Flex Straight Liquidtight Connector used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting
Features
Use with Enviro-Flex Liquid Tight Conduit
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
Polypropylene sealing ring
UL listed
$
3.47
Qty:
Part #:301563
- CANTEX 5441001 is a 1/2 in. Enviro-Flex 90 Degree Liquidtight Connector which is a connector bent at a 90-degree angle used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting
Features
Use with Enviro-Flex Liquid Tight Conduit
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
Polypropylene sealing ring
UL listed
$
3.85
Qty:
Part #:301567
- CANTEX 5441002 is a 3/4 in. Enviro-Flex 90 Degree Liquidtight Connector which is a connector bent at a 90-degree angle used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting
Features
Use with Enviro-Flex Liquid Tight Conduit
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
Polypropylene sealing ring
UL listed
$
5.88
Qty:
Part #:301587
- CANTEX 5133300 is a 1-Gang 1/2in. Exposed Boxes Type FDE designed for use in indoor and outdoor locations where the box is exposed and subject to environmental conditions
Features
Type FDE is designed for conduit termination with one conduit hub and no outlet
26.8 cu. in. surface mount box
Durable non-conductive PVC will not rust or corrode
Cover sold separately
UL listed
Made in USA
$
6.58
Qty:
Part #:301601
- CANTEX 5133348 is a 1-Gang Weatherproof GFI Receptacle Cover designed for use with exposed weatherproof boxes
Features
Includes gasket and screws
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
UL listed
Made in USA
$
14.40
Qty:
Part #:301683
- CANTEX 6141624 is a 3/4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.22
Qty:
Part #:301763
- CANTEX 5133663 is a 1/2 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
2.21
Qty:
Part #:301764
- CANTEX 5133664 is a 3/4 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
2.83
Qty:
Part #:301765
- CANTEX 5133665 is a 1 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
5.78
Qty:
Part #:301767
- CANTEX 5133667 is a 1-1/2 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
5.70
Qty:
Displaying: 25 - 48 of 136 Matching Items