Hayward
A. Y. McDonald Water Works
View:
Active Filters :
Part #:507333
- 67362 V & B Supreme Replacement Handle for 10# to 16# Sledge Hammers. Eye Size 1-3/8" x 1". Length 36". Includes one wood wedge, one steel wedge and instructions. MADE IN USA.
$
13.88
Qty:
Part #:101902
- Model 5025PVSP 1/4 HP 120 Volts 60 Hz 3.8 Amps Thermoplastic Construction 1 1/4” or 1 1/2” Size 10’ Length Cord Handling 1/8” Solids 3450 RPM Single Phase :
Qty:
Part #:200145
- SUBMITTAL INFORMATION Static Head:
- Min 2ft. / Max 10 ft. static head over check valvePressure Test
Qty:
Qty:
Part #:506907
- The 16oz 99 hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face, and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels in use. Rust-resistant powder coat finish. MADE IN USA.
Qty:
Part #:506922
- R99 has Polished striking head, sides and claw. Octagon neck and round face. Forged steel from head to heel. Exclusive, Shock-Blok&trade plug in head absorbs shock. Non-slip cushioned PVC grip is molded to handle. "MADE IN THE USA".
Qty:
Part #:507326
- Supreme Hickory replacement handle for 2 lb to 4 lb Blacksmith Hammer. Oval Eye 1 inch x 3/4 inch. Overall length 16 inches. One wood wedge, two steel wedges and instructions included. MADE IN USA.
Qty:
Part #:508143
- DB200 Heads are partially filled with steel shot to increase impact and reduce rebound. The one-piece threaded faces feature a shoulder to absorb the force of side blows, protecting the threads. The one-piece, aluminum alloy heads are serrated to help keep the faces tight. A neoprene compound grip on the handle absorbs shock. Supplied with two white nylon faces. MADE IN ENGLAND.
Qty:
Qty:
Part #:701356
- A.Y. McDonald Mfg. Co. No-Lead Low Pressure Valves are constructed from heavy duty no-lead brass and are recommended for residential and commercial applications and positive shut-off with various inlet configurations.:
Qty:
Part #:701541
Qty:
Part #:702734
- new upc
Qty:
Hayward 1in PVC Y-Strainer with Threaded End Connections 1/32in Perf Screen and FPM O-Rings YS10100T
Qty:
Part #:703645
Qty:
Part #:703653
Qty:
Part #:703981
Qty:
Part #:708983
Qty:
closeout
$280.59 MSRP
$
218.41
Part #:701136
- CLOSEOUTS Only 3 Left!
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”- 25 PSIG- NOTE
Qty:
Part #:506962
- HD3 3 LB Hand Driller the right hammer for striking star drills, cold chisels, brick chisels and punches. Broad, polished striking faces with generous bevels. Rust-resistant powder coat finish on smooth ground sides. Select, hickory handle. MADE IN USA.
Qty:
Part #:507311
- 61162 Supreme Adze Eye replacement handle for 13-16 oz. Claw hammers & Vaughan 16 oz. Scaling Hammer. Fits 99 & SC16. Eye 1 inch x 1/2 inch. Overall length 13 1/2 inches. One wood wedge, 2 steel wedges and instructions included. MADE IN USA.
Qty:
Part #:107512
- SUBMITTAL INFORMATION NO-LEAD:
- The weighted average of the wetted surface of this no-lead product contacted by consumable water contains less than one quarter ofone percent (0.25%) lead.
Qty:
Part #:704443
- SUBMITTAL INFORMATION - Sizes:
- 1/2”, 3/4”, 1”- Ambient working temp. = -40ºF to 125ºF- 400 WOG, 150 WSP- 1/4 turn operation- 2 piece forged brass body- Blow out proof stem- Conforms to MSS-SP-110- Thread comply to ANSI B1.20.1
Qty:
Part #:701123
- SUBMITTAL INFORMATION - Sizes:
- 1/2” - 3/4”- 125 WOG- Soft seat design- Non rising stem- Directional- Complies with NSF / ANSI 372-2010
Qty:
Part #:701354
- SUBMITTAL INFORMATION - 125 WOG- Sizes:
- 1/2”, 3/4”- 1/2” is MNPT or SWT Combination- Complies with NSF/ANSI 372-2010
Qty:
Displaying: 25 - 48 of 252 Matching Items