J.H. Williams
A. Y. McDonald Water Works
View:
Active Filters :
Part #:101904
- Cord SolidsModel 5020PUUP 1/5 HP 120 Volts 60 Hz 3.6 Amps Thermoplastic Construction Discharge Size 1 1/4in Cord Length 10ft Solid Handling 1/8in 3450 RPM Single Phase:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:707045
- No-Lead 125# Brass Threaded Fittings. Brass Hex Reducing Bushing - No-Lead
- NSF / ANSI 61-4 & NSF / ANSI 372
A.Y. McDonald Mfg. Co. No-Lead Pipe Fittings & Nipples are constructed from heavy duty brass and are rated for commerical, industrialand residential applications up to 125 WOG. Threads conform to ANSI B1.20.1 and fitting dimensions comply with ANSI B16.15.
Qty:
Part #:503892
-
Overview
&bull All tools are professional quality, made of high-grade chrome vanadium steel
Qty:
Part #:101970
- Mechanically activated, wide angle switch for direct control of pumps up to 1/2 HP at120V and 1 HP at 230V.
Qty:
Part #:701122
- SUBMITTAL INFORMATION - Sizes:
- 1/4”, 3/8”, 1/2”, 3/4”, 1”- 25 PSIG- NOTE
Qty:
Part #:511684
- 1/2" Drive Crowfoot Wrench Set, Open End, SAE, 12 Pieces
10840 12 Piece 1/2" Drive Crowfoot Wrenches on Clip RailsContents IncludeProduct Code Size (Inches) 10810 15&frasl16 10811 1 10812 1 1&frasl16 10813 1 1&frasl8
10814 1 3&frasl16
10815 1 1&frasl4
10816 1 5&frasl16
10817 1 3&frasl8
10818 1 7&frasl16
10819 1 1&frasl2
10820 1 9&frasl16
10821 1 5&frasl8
Qty:
Part #:508171
- 1" Drive 12-Point SAE 1-3/4" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:503700
- 3/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:503704
- 3/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:501976
- Product Details
Chrome plating provides increased protection from rust and corrosion
Drive handles provide extra leverage with greater strength than ratchets
Square drive slides on T-Handles for versatility
Flex handle flex drive swivels 11° in either direction
Spring and plunger socket retention
Qty:
Part #:507233
- 7 Pc SAE Nutdriver Set
Hollow shaft accommodates long bolts or studs
Precision machined socket end
Cushion grip handle for comfort
Size imprinted on color coded ends for easy identification
Qty:
Displaying: 1 - 24 of 813 Matching Items