Cantex
A.Y. Mcdonald Water Works
View:
Active Filters :
Part #:130-5136-114
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Certified to NSF/ANSI 61 (reference height restrictions)• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Copper tubing made in complianc• Lead free solder joints• Designed to provide proper meter spacing for ease of installation• Padlock wings standard on all valves:
$
250.00
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:300994
-
Previous
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
Next
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
$
69.15
Qty:
Part #:300995
- Key features
SureGrip&trade AC285 has rubber overmolded surfaces for a firm reliable grip
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm (0.75 in) nut
Strong, nickel-plated steel jaws for a tight hold
Conforms to safety standard IEC61010-0312002 +A12008, CAT III 1000 V, CAT IV 600 V
10 A maximum, pollution degree 2, 2000 m altitude
Operating temperature -20 °C to 55 °C (-4 °F to 131 °F), 95% RH
One-year warranty
Qty:
Part #:300997
- Key features
Single probe pierces 0.25 to 1.5 mm insulated wire
Small pin allows self-healing of the insulation
1000 V, 10 A maximum
One year warranty
Qty:
Part #:301012
- Key features
Zippered polyester carrying case with padding and inside pocket.
Dimensions 218 x 128 x 64 mm (8.6 x 5 x 2.52 in)
Recommended for 11x series, 87v, 32x series, and most mid-sized DMMs
&ldquo...ample room for the quick reference card, the meter, and the leads (...) the material quality and construction should take abuse while protecting your expensive meter&rdquo- Jabit, verified customer
$
58.08
Qty:
Part #:301084
- Key features
Zippered carrying case with inside pocket belt loop and inside meter strap
One year warranty
Qty:
Part #:301182
- Key features
Zippered carrying case with inside pocket and belt loop
One year warranty
Qty:
Part #:301272
- CANTEX 6141625 is a 1 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.21
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:301356
- CANTEX 6141632 is a 4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
4.62
Qty:
closeout
$
199.00
Qty:
Part #:301402
- CANTEX 5140112 is a 4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
3.02
Qty:
Part #:301405
- CANTEX 5133828 is a 2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
2.09
Qty:
Part #:301414
- CANTEX 5133832 is a 4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
28.17
Qty:
closeout
$
129.00
Qty:
Part #:301487
- CANTEX 5133821 is a 4 in. x 90-Degree x 36 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
87.11
Qty:
closeout
$
329.00
Qty:
Part #:301544
- CANTEX 6441001 is a 1/2 in. Enviro-Flex Straight Liquidtight Connector used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting Features Use with Enviro-Flex Liquid Tight Conduit For use in wet or damp locations Durable non-conductive PVC will not rust or corrode Polypropylene sealing ring UL listed
$
2.45
Qty:
Part #:301612
- Key features
SureGrip design so you can do your work comfortably. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4mm shrouded banana connectors. This handy all-in-one kit includes
AC220 SureGrip
Alligator Clip Set
TP220 SureGrip
Insulated Test Probe Set
TL224 SureGrip Silicone Test Lead Set
$
119.37
Qty:
Part #:301641
- Key features
48 inches (1.22 meter) PVC insulated test leads with banana plugs
CAT IV 600 V, CAT III 1000 V, CAT II 1000 V, only with protective cap
One-year warranty
Qty:
closeout
$
159.59
Qty:
Displaying: 25 - 48 of 287 Matching Items