Fluke
A.Y. Mcdonald Water Works
View:
Active Filters :
Part #:204403
- Tees SAME END CONNECTIONS ON ALL THREE SIDES -22 CTS x -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204035
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Large wrench flats provided for proper installation• ½” – 1” rated for 100 PSIG water pressure• 1 ¼” – 2” rated for 80 PSIG water pressure• Insert stiffeners required on all flexible plastic connections.:
$
154.00
Qty:
Part #:130-5136-114
- SUBMITTAL INFORMATION • Manufactured in compliance with ANSI/AWWA C800 (latest revision)• Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latestrevision) and identified with “NL”• Certified to NSF/ANSI 61 (reference height restrictions)• Brass components not in contact with potable water conform to ASTM B62 and ASTM B584, UNSC83600 -85-5-5-5 (latest revision)• Copper tubing made in complianc• Lead free solder joints• Designed to provide proper meter spacing for ease of installation• Padlock wings standard on all valves:
$
250.00
Qty:
$
265.00
Qty:
Part #:511820
$
450.50
Qty:
$
503.50
Qty:
$
450.50
Qty:
$
84.80
Qty:
Part #:300994
-
Previous
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
Next
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
$
69.15
Qty:
Part #:300995
- Key features
SureGrip&trade AC285 has rubber overmolded surfaces for a firm reliable grip
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm (0.75 in) nut
Strong, nickel-plated steel jaws for a tight hold
Conforms to safety standard IEC61010-0312002 +A12008, CAT III 1000 V, CAT IV 600 V
10 A maximum, pollution degree 2, 2000 m altitude
Operating temperature -20 °C to 55 °C (-4 °F to 131 °F), 95% RH
One-year warranty
Qty:
Part #:300997
- Key features
Single probe pierces 0.25 to 1.5 mm insulated wire
Small pin allows self-healing of the insulation
1000 V, 10 A maximum
One year warranty
Qty:
Part #:301012
- Key features
Zippered polyester carrying case with padding and inside pocket.
Dimensions 218 x 128 x 64 mm (8.6 x 5 x 2.52 in)
Recommended for 11x series, 87v, 32x series, and most mid-sized DMMs
&ldquo...ample room for the quick reference card, the meter, and the leads (...) the material quality and construction should take abuse while protecting your expensive meter&rdquo- Jabit, verified customer
$
58.08
Qty:
Part #:301084
- Key features
Zippered carrying case with inside pocket belt loop and inside meter strap
One year warranty
Qty:
Part #:301182
- Key features
Zippered carrying case with inside pocket and belt loop
One year warranty
Qty:
closeout
Part #:301280
- Availability: Will be backordered (Typically arrives in 14 days)
$
299.23
Qty:
closeout
$
199.00
Qty:
closeout
$
129.00
Qty:
closeout
$
329.00
Qty:
Part #:301612
- Key features
SureGrip design so you can do your work comfortably. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4mm shrouded banana connectors. This handy all-in-one kit includes
AC220 SureGrip
Alligator Clip Set
TP220 SureGrip
Insulated Test Probe Set
TL224 SureGrip Silicone Test Lead Set
$
119.37
Qty:
Part #:301641
- Key features
48 inches (1.22 meter) PVC insulated test leads with banana plugs
CAT IV 600 V, CAT III 1000 V, CAT II 1000 V, only with protective cap
One-year warranty
Qty:
closeout
$
159.59
Qty:
closeout
Part #:301776
- CLOSEOUTS Only 1 Left!
- Key features
Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM's
Two ranges 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm
$
289.99
Qty:
Displaying: 25 - 48 of 364 Matching Items