Hilti
A.Y. Mcdonald Water Works
View:
Part #:802460
-
High quality liquid filled gauge
Vacuum and compound ranges through 0 psi to 15,000 psi
1-1/2", 2", 2-1/2" and 4" gauge sizes
Impact-resistant ABS and stainless steel case
Copper alloy and brass wetted parts
Qty:
Part #:804262
Qty:
Part #:804273
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:804270
Qty:
Part #:505194
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
1.39
Qty:
Part #:510954
-
Setting tool HVU HIS Setting tool Mechanical setting tool HVU HIS 3/8" #45969
$
98.74
Qty:
Part #:800543
- WARNING This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Qty:
Qty:
Qty:
Qty:
Part #:804264
Qty:
Part #:804276
$
78.10
Qty:
Part #:509514
-
HDI-L+ Flush anchor Drop-in anchor HDI-L+ 3/8" #2062739Approvals / Test reportsFM (Factory Mutual), UL (Underwriter Laboratories)Material, corrosionCarbon steel, zinc-platedBase materialsConcrete (lightweight), Concrete (lightweight over metal deck), Concrete (uncracked)PROFIS SoftwareNoDrill bit diameter1/2 inProduct ClassPremium
Part #:508622
-
HDI+ / HDI Flush anchor Drop-in anchor HDI+ 3/8" #2058129Approvals / Test reportsFM (Factory Mutual), UL (Underwriter Laboratories)Material, corrosionCarbon steel, zinc-platedBase materialsConcrete (lightweight), Concrete (lightweight over metal deck), Concrete (uncracked)PROFIS SoftwareNoDrill bit diameter1/2 inProduct ClassPremium
closeout
Part #:508615
- CLOSEOUTS Only 34 Left!
- Applications; Fastening structural steel, hand rails, signs, racks, equipment and formwork bracing:
$
2.01
Qty:
Part #:508632
-
Hand setting tool HST 3/8"#32979 HSD/HST 10-3/8 Setting tool
Manual setting tool for drop-in anchors (HDI-L/HDI/HDI-S/HDV)
$
7.82
Qty:
Part #:508613
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
1.95
Qty:
Part #:508614
- Kwik Bolt 3 carbon steel. Everyday standard wedge anchor for uncracked concrete (CS). Type of fixingPre-fastening, Through-fastening. Environmental conditionsIndoor, dry conditions. Head configurationExternally threaded.
Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
2.36
Qty:
Part #:1267-18-110-025-0/180-F/C
- ApplicationUsed in almost every area of manufacturing, especially suited for applications in the following areasIndustrial processPetrochemicalFood & beverage processingCommercialWastewaterLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.NoteThermowells are recommended for pressure, corrosive fluids and high velocity applications.
Qty:
Part #:1267-18-110-025-0/200-F
- ApplicationUsed in almost every area of manufacturing, especially suited for applications in the following areasIndustrial processPetrochemicalFood & beverage processingCommercialWastewaterLimitations Which Apply AreThese units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.NoteThermowells are recommended for pressure, corrosive fluids and high velocity applications.
Qty:
Displaying: 1 - 24 of 47 Matching Items