Continental
Accuform
View:
Active Filters :
Part #:506992
- Technical Specs
Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
60.41
Qty:
Part #:509136
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 50 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
57.02
Qty:
Part #:502037
- Technical Specs
Item RTV Silicone Sealant
Type Shrink-Resistant for Precut Gaskets
Size 80 mL
Color Blue
Temp. Range -65 to 500 Degrees F
Specific Gravity 1.04
Flash Point 199.4 Degrees F
Full Cure 24 hr
Begins to Harden 10 min
Application Coat Pre-cut Gaskets for Increased Reliability
$
11.89
Qty:
Part #:509455
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Bottle Chemical Type Methacrylate Ester Color Purple Gas Pressure Range 10,000 psi Begins to Harden Not Specified Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.02 @ 25 Degrees C Viscosity 14,000cP For Use With 7649, Primer 7088, or 7471 Application Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System, Suitable for Fittings Up to 50mm in Diameter Includes Pneumatic and Hydraulic Fittings
$
55.44
Qty:
Part #:505912
- Technical Specs
Item Rust Treatment Color Opaque Container Size 5 gal Dry Time 20 min Application Method Brush Or Commercial Sprayer
$
918.58
PAIL
Qty:
Part #:503341
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 10 min Series 262 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,800 to 5,000 cP Removable With Heat and Hand Tools Application Chemical Conditions, Heavy Shock and Vibration Applications. High Strength Requires Heat and/or Special Tools For Removal, Locking Bolts Up to 3/4 in . For Extreme Environmental Standards MIL-S-46163A Type II Grade 0, OSHA Hazard Communication, RoHS Compliant
$
21.20
Qty:
Part #:303050
- Lock out machinery and inform readers not to operate the related device.
Properly lock out equipment and machinery in the workplace or facility to ensure safety of all personnel
Traditional OSHA-style signs, tags and labels are the most widely recognized design format in the industry
Danger header indicates a hazardous situation that, if not avoided, will result in death or serious injury
Qty:
Part #:506505
- Floor Stripe&trade High Performance Message Marking Tapes Identify and call attention to hazards throughout your facility. Printed 1-mil polyester tapes have 1-mil gloss over-laminate. Acrylic adhesive backing provides high tack and bond to a variety of smooth and rough surfaces. Available 3" wide x 50-ft. roll. Tapes can be custom printed with your message, graphic, or logo. Contact us with part number PTP155.
$
48.45
Qty:
Part #:806845
- Clearly mark an exit in your warehouse, office, or facility. Clearly marked exits can make evacuating in an emergency easier.
Material Details
Plastic with protected surface coating (see details above)
Impact resistant with slight flexibility
Service temperature range -90°F to 168°
Lightweight indoor/outdoor use
Rounded corners and 3/16" mounting holes on most sizes, will be adjusted for larger sizes
Recycle code 6
$
13.60
Qty:
Part #:507402
- Technical Specs
Item Rust Treatment Color Opaque Container Size 1 qt Dry Time 20 min Application Method Brush Or Commercial Sprayer
Qty:
Part #:512443
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 20 sec Viscosity - Adhesives 45 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 495 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.1 @ 23.89 Degrees C Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General Purpose Tensile Strength 2750 psi Standards 29 CFR 1910.1200 Application Bonds Rubber, Metal and Plastic Parts with Gaps up to 0.004 in
$
5.70
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Qty:
Displaying: 25 - 48 of 366 Matching Items