Emerson Professional Tools, Llc
Accuform
View:
Active Filters :
Part #:300217
- Sir Nickless&trade Armored Cable Cutter
The Sir Nickless&trade protects armored cable wires by drawing the wires down, creating airspace above the wires and providing room for the cutter blade to shear through and sever the armored casing without nicking the wires within. The Sir Nickless&trade is unique in that it has a curved design that allows the wires to draw down providing room for the cutting blade. The cable Cutter works well on all popular types of armored cable up to 3/8 inch diameter.
Handles all common BX, MCAP®, MC and Flex cables
Blade cuts armor without damage to internal conductors
Splices cleanly through casings with only a few turns
Handle knob stores up to six replacement blades
$
48.16
Qty:
Part #:302514
- Bender Handle, 1" x 44"
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:310377
- Safe-T-Grip® Fuse Puller, Medium
The Medium Safe-T-Grip® Fuse Puller is fully insulated and is perfect for interchanging cartridge type fuses. It has a strong glass filled polypropylene construction that provides high di-electric strength. It is convenient to hold and features notched handles that offers more grip. Fuse puller is suitable for removing fuses of rating 0 to 100A/250V & 600V. Puller is suitable for removing fuses of diameter ranging from 1/2" - 1".
Medium Puller for 0-100A/250V & 600V, 1/2" to 1" diameter fuses
7-1/2" overall length
Handy and convenient for removing or replacing cartridge-type fuses
Fully insulated, high dielectric, glass filled polypropylene construction
Notched handles provide safe, no-slip grip
Clearly marked amperage ranges
$
21.05
Qty:
Part #:310380
- Safe-T-Grip® Fuse Puller, Large
The Small Safe-T-Grip® Fuse Puller is fully insulated and is perfect for interchanging cartridge type fuses. It has a strong glass filled polypropylene construction that provides high di-electric strength. It is convenient to hold and features notched handles that offers more grip. Fuse puller is suitable for removing fuses of rating 31 to 600A/250V & 31 to 400A/600V. Puller is suitable for removing fuses of diameter ranging from 3/4" - 2-1/2".
Large Puller for 31 to 600A/250V & 31 to 400A/600V, 3/4" to 2-1/2" diameter fuses
11-3/4" overall length
Handy and convenient for removing or replacing cartridge-type fuses
Fully insulated, high dielectric, glass filled polypropylene construction
Notched handles provide safe, no-slip grip
Clearly marked amperage ranges
$
46.51
Qty:
Part #:310381
- Fuse Puller and Test Light
The Fuse Puller & Test Light comes in a convenient pocket-sized tool that provides maximum safety when pulling cartridge fuses and checking electrical connections. It checks voltage from 100 - 600 VAC/VDC. Test prods fit parallel and tandem slot receptacles. The puller also includes built-in resistors that limit the current flow to eliminate false indication. All those features in a tool that fits right in your pocket!
Convenient pocket-sized tool safely pulls cartridge fuses and checks electrical connections
Test prods fit parallel and tandem slot receptacles
Built-in resistors limit current flow to eliminate false indication
For 9/16 in. to 1 in. fuses, 100A/250V and 60A/600V
Test capacity from 100V to 600V AC/DC
$
55.54
Qty:
closeout
$
82.83
Qty:
closeout
$
28.52
Qty:
closeout
$
120.89
Qty:
closeout
$779.00 MSRP
$
7.79
Qty:
closeout
$
0.61
Qty:
$
41.37
Qty:
closeout
$
60.11
Qty:
closeout
$
7.25
Qty:
closeout
$
19.29
Qty:
closeout
$
1.36
Qty:
closeout
$
69.09
Qty:
Part #:521047
Qty:
Part #:800387
- Five-blade Screwdriver Set
The #S605 Five-blade Screwdriver Set includes slotted and crosspoint blades.
Qty:
Part #:510965
- Tungsten Carbide Point Scriber/Etching Pen with MagnetThe #88CM Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steel, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
Point diameter 1/16 in. (1.6mm)
Qty:
Part #:303760
- Marker (Carbide Point) 120V, 3-Wire
Personalize metal, glass, ceramics, plastics, hard rubber, wood and stone with the IDEAL Engraver Tool. It comes supplied with a carbide point tip and a diamond point is available for engraving extra-hard materials. A stroke-adjustment dial regulates the engraving depth from fine lines to deep grooves. It operates at 7,200 strokes per minute and features a unique design that reduces bouncing to provide smooth, easy writing.
$
157.54
Qty:
Part #:303514
- In-Sure® Push-In Wire Connector, Model 87 5-Port Gray, Jar of 150
Strip, push, connect &ndash the fastest way to make a connection.
The In-Sure® Push-In Wire Connector is perfect for residential, light commercial, lighting retrofit, and pre-fab wiring systems, or any other branch circuit wiring application where a traditional twist-on wire connector would be used. Simply push the wire in &ndash the low insertion force makes it easy.
The color-coded shell allows for quick identification of port configuration while the clear polycarbonate housing allows for visual verification of every connection. The ergonomic design is easier to grip which means more comfortable push-in connections. The compact size makes for easy installations in even the tightest spots or shallow boxes, and the tough, flame-retardant shell stands up to the harshest environments.
UL Listed, CSA Certified, and rated to 600V &ndash the In-Sure® saves time and improves productivity while perfecting connections.
COPPER TO COPPER ONLY. Do not use on aluminum.
Ergonomic design for easy grip and comfortable installation
Low insertion force for fast and easy connections
Compact size makes installation easy
Clear shell gives visual verification of connection
Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Qty:
Part #:303832
- Steel Crimp Connector, Model 411 18-8 AWG, Box of 50
Crimp connectors from IDEAL are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. The steel and copper crimp connectors cover a wide range of combinations and have available insulating caps to protect against dangerous electrical shock.
Three models cover a wire range from 18 AWG to 4 AWG
Long-zinc plated steel sleeves maximize contact area with conductors
UL listed to 486C and CSA certified to C22.2 #188 comply with Federal Specification W-S-610E
IDEAL hand tools U.L. listed for Models 410, 411, 412 30-425, 30-429, 30-430
Qty:
Part #:300525
- 9-3/4" Multi-Crimp Tool - Dipped Grip
Crimps bare or insulated terminals and splices on 10&ndash22 AWG wire
Knife-to-anvil blades provide long-lasting cutting performance
High leverage for easy crimping and cutting
Drop-forged, high-carbon steel construction
$
36.79
Qty:
Part #:302953
- 120' Blued-Steel&trade Fish Tape w/Formed Hook & Tuff-Grip&trade Pro Case
Perfect for longer conduit runs, this fish tape boasts the highest tensile strength, and highest grade carbon steel for professional durability and reliability. The Blued-Steel&trade also provides rust and corrosion resistance for longer life. The Tuff-Grip&trade Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall. Multiple width, length and eyelet options are available for ease of use for any application. Replacement tapes also available.
1/8" x .060"
Laser etched in 12 in. increments to provide instant conduit length (Tuff-Grip&trade Pro models only)
Unique "blued" finish is non-oily and resists rust
Industry's straightest wire
Stiffer for long runs
Tensile strength 1,600 lbs.
The Fish Tape square inlay with notched corner combined with an ergonomic handle is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm Off.
The blue color of the Fish Tape products is a registered trademark of IDEAL INDUSTRIES, INC. Reg. U.S. Pat. & Tm. Off.
$
55.27
Qty:
Displaying: 25 - 48 of 168 Matching Items