Emerson Professional Tools, Llc
Accuform
View:
Active Filters :
Part #:307340
- Yellow 77®, 5-Gallon Bucket
IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
Safe to use with most cable types except low-density polyethylene and semi-conducting jackets
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 130°F (0°C to 54°C)
Dries slowly to a thin, non-conductive film that won&rsquot harden in conduit
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:300240
- Replacement Blade, BX Cutter, 1/pack
Handles all common BX, MCAP®, MC and Flex cables
Blade cuts armor without damage to internal conductors
Splices cleanly through casings with only a few turns
Handle knob stores up to six replacement blades
$
39.25
Qty:
Part #:305730
- Stripmaster® Wire Stripper, 10-22 AWG
One-step stripping enhances productivity
Precision-ground, knife-type blades provide clean, accurate stripping
Sturdy die-cast zinc frame provides long-term durability
90-day warranty
Qty:
Part #:302955
- Swivel-Blade® Cable Slitter & Ringing Tool, 1/4" to 3/4" OD
These tools are for quick and precise removal of insulation from round cables without nicks. Offering a unique lever and blade design allows ringing, and longitudinal slitting of cable jackets. Adjustable blade for different jacket thicknesses or cutting depth up to .125 inches. Comes with a spare blade in the handle.
Cuts around cable jack as well as slits the length of jacket for easy removal
Use with single or multiple conductor cable 1/2 in. to 3/4 in. O.D.
Blade adjusts for jacket thickness up to .125 in.
Spare blade in handle base
Qty:
Part #:302987
- 120V AC E-Z Check® Plus GFCI Circuit Tester
Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot in 3 wire, 120 VAC circuits
Simulates ground fault for testing GFCI
No-slip ergonomic design maximizes comfort
Premium neon lamps prevent false readings
Tough, impact-resistant case
2-year warranty
$
65.40
Qty:
Part #:302507
- Ductile Iron Bender Head, 1/2" EMT
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302510
- Ductile Iron Bender Head - 3/4" EMT, 1/2" Rigid & 1/2" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302511
- Ductile Iron Bender 74-003 w/Handle - 1" EMT, 3/4 in. Rigid & 3/4" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. This conduit bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302512
- Ductile Iron Bender Head - 1-1/4" EMT, 1" Rigid, 1" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302515
- Bender Handle, 1-1/4" x 54"
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:310285
- Steel Crimp Connector, Model 410 18-10 AWG, Bag of 100
Crimp connectors from IDEAL are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. The steel and copper crimp connectors cover a wide range of combinations and have available insulating caps to protect against dangerous electrical shock.
Three models cover a wire range from 18 AWG to 4 AWG
Long-zinc plated steel sleeves maximize contact area with conductors
UL listed to 486C and CSA certified to C22.2 #188 comply with Federal Specification W-S-610E
IDEAL hand tools U.L. listed for Models 410, 411, 412 30-425, 30-429, 30-430
Qty:
Part #:310293
- 50' Blued-Steel&trade Replacement Fish Tape
Perfect for longer conduit runs, this fish tape boasts the highest tensile strength, and highest grade carbon steel for professional durability and reliability. The Blued-Steel&trade also provides rust and corrosion resistance for longer life. The Tuff-Grip&trade Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall. Multiple width, length and eyelet options are available for ease of use for any application. Replacement tapes also available.
Replacement Tape - No Case
Laser etched in 12 in. increments to provide instant conduit length (Tuff-Grip&trade Pro models only)
Unique "blued" finish is non-oily and resists rust
Industry's straightest wire
Stiffer for long runs
Tensile strength 1,600 lbs.
Qty:
Part #:310301
- 120' Blued-Steel&trade Replacement Fish Tape
Perfect for longer conduit runs, this fish tape boasts the highest tensile strength, and highest grade carbon steel for professional durability and reliability. The Blued-Steel&trade also provides rust and corrosion resistance for longer life. The Tuff-Grip&trade Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall. Multiple width, length and eyelet options are available for ease of use for any application. Replacement tapes also available.
Replacement Tape - No Case
Laser etched in 12 in. increments to provide instant conduit length (Tuff-Grip&trade Pro models only)
Unique "blued" finish is non-oily and resists rust
Industry's straightest wire
Stiffer for long runs
Tensile strength 1,600 lbs.
Qty:
Part #:301845
- Fish Tape Leader
Made of a flexible steel mesh material, these fish tape leaders are super flexible, and will help navigate your IDEAL fiberglass or steel fish tape through tough bends. Choose the appropriate product that works with each style. Easy to attach or replace. Instructions included.
Guides fish tape around bends in conduit
Handles up to six 10 AWG bare wires
Pulls up to 500 lbs
Qty:
Part #:300051
- IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
Safe to use with most cable types except low-density polyethylene and semi-conducting jackets
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 130°F (0°C to 54°C)
Dries slowly to a thin, non-conductive film that won&rsquot harden in conduit
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:312310
- T®-6 T®-Stripper Wire Stripper
Invented and manufactured at our Sycamore Illinois facility, the T®-Stripper Wire stripper line is the leading brand name in the world for strippers. The industry standard for almost 50 years. Compact, lightweight and easy to use. Features precision-ground, knife-type blades, built-in looping holes, wire cutters and a convenient plier nose.
Form-ground, knife-type blades for accurate, easy stripping without nicking conductor
Laser-etched wire gauge for easy-to-read visibility
Spring-loaded automatic opening
Corrosion-resistant, black oxide finish
Tough steel construction
Strips 14-24 AWG solid, 16-26 AWG stranded
$
16.90
Qty:
Part #:303544
- Cable Tie, 8", 18 lb., Natural, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
$
16.34
Qty:
Part #:312440
- Vol-Test Voltage Tester
Extremely rugged and reliable
Vibrates when AC voltage is present
Indicates AC/DC voltage level
Replaceable leads with shielded probe tips (IEC61010-031 compliant)
Bright, long-life LED&rsquos and neon indicator lamp
Low impedance to eliminate ghost voltages
Dual voltage indication for backup safety
2-year warranty
$
74.48
Qty:
Part #:302513
- Bender Handle, 3/4" x 38"
IDEAL® Aluminum conduit bender is made of lightweight aluminum construction for easy handling. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Uses the Benfield bending system, which is standard to the industry. Includes convenient bending guide as a reference for basic bends. Two sizes accommodate 1/2 in. and 3/4 in. conduit. Available complete with head and handle, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:303397
- Terminal Strip, 12-Pole, 22-10 AWG
IDEAL Terminal Strips are designed and manufactured to be rugged, reliable, and easy to use. A thermoplastic base and corrosion-resistant screws and hardware provide extended service life. Optional accessories provide convenient, versatile application. Available in a wide variety of circuit configurations, electrical ratings and center spacings, an IDEAL terminal strip is available for virtually any job.
.562 (14.82mm) center spacing
Accepts wire sizes from 10 through 22 AWG Cu
#8-32 Philslot, zinc-plated steel terminal screws
Recommended torque 16 in.-lb.
Heavy-duty, corrosion-resistant screws, surface plates, and optional hardware
Rugged polyester thermoplastic base (UL Rated 94V-0)
UL Recognized (E82048) and CSA Certified (LR15364)
Ratings 30A/600V UL Listed, CSA Certified (30A/250V when used with optional quick connects).
Qty:
Part #:310742
- Screw Point Flexible Bit 3/4" x 54"
Fast and aggressive, self-starting bit
Ultra-sharp ground threads provide increased pulling power through obstructions
Designed for easy to tough wood drilling
Qty:
Part #:506257
- Holds tight onto circuit breaker for a secure and solid lockout to avoid hazards.
Easily applied by standard flathead screwdriver
Red octagon shape reinforces lockout status
Fits most 120/240 circuit breakers
Accommodates up to 9/32-inch diameter padlock shackles (sold separately)
Single pole 13/16-inch W x 3-inch L x 3/4-inch H
Qty:
Part #:512032
- Magnetic Pick Up Tool with Rigid Or Flexible Shaft Extends From 18-inches to 32-Inched, 2lb Pull Capacity Grabber/Retrieving Magnet
Ideal for retrieving steel and iron parts from hard-to-reach and see work areas, the General Tools 384N Flexible Telescoping Magnetic Pick-Up is a great combination tool for retrieving lost items from confined areas. Equipped with a powerful 2 lb. pull Neodymium magnet the shaft can be either rigid or flexible by simply unscrewing the handle and removing the steel shaft. Without the shaft, the pick can easily snake around objects to retrieve lost items. The shaft can extend from 18" (457mm) to 32" (813mm).
Qty:
Part #:807557
- ANGLE-IZER® Contour Gauge, Profile Gauge, Shape Duplicator, 10-Inch
PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipe
PERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
EXTRA LENGTH- 10&rdquo gauge is ideal for woodworking, linoleum installation, ceramic tile installation or any job where contour duplication is essential
Qty:
Displaying: 49 - 72 of 168 Matching Items