CDA Brass 360
Acrylic/PTFE
View:
Active Filters :
- Material: Acrylic/PTFE CDA Brass 360 Leather
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:805892
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:801844
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:801891
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805053
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805054
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805087
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805090
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805091
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:334-5071204C
- Male GHT x Female NPTF Adapter Attributes
Weight
0.136 lb
Material
CDA Brass 360
Male Thread
GHT
Female Thread
NPTF
Length
.75"
Hex
1-1/16"
Male Thread Size
3/4"-11-1/2
Female Thread Size
1/4"-18
$
3.37
Qty:
Part #:334-5041212C
- Female GHT Swivel x Male NPTF Adapter Attributes
Weight
0.258 lb
Material
CDA Brass 360
Male Thread
NPTF
Female Thread
GHT
Length
1.43"
Hex
1-3/16"
Male Thread Size
3/4"-14
Female Thread Size
3/4"-11-1/2
$
7.88
Qty:
Part #:539-35-969
- Tuff-Tote&trade Tool Carrier, Premium Leather w/Strap
The Tuff-Tote® Tool Carrier comes with 4 center screwdriver slots, 2 interior compartments, 2 divided outside pockets, and 4 outside tool loops. Its unique stand-alone design keeps tools standing upright for easy identification and access. Tool carrier comes with removable should strap to help relieve lower back strain. It also has rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long term-durability, in addition to an oil and moisture-resistant reinforced bottom.
Lifetime warranty
$
292.78
Qty:
Part #:334-5071208C
- Male GHT x Female NPTF Adapter Attributes
Weight
0.079 lb
Material
CDA Brass 360
Male Thread
GHT
Female Thread
NPTF
Length
.75"
Hex
1-1/16"
Male Thread Size
3/4"-11-1/2
Female Thread Size
1/2"-14
$
3.47
Qty:
Part #:334-5091212C
- Male GHT Adapter Attributes
Weight
0.131 lb
Optional Package/Box Quantity
1
Material
CDA Brass 360
Male Thread
GHT
GHT
Length
1.24"
Hex
1-1/16"
Male Thread Size
3/4"-11-1/2
3/4"-11-1/2
$
4.34
Qty:
Part #:334-5901212C
- Catalog Pg 420. Package Qty Only N:
$
4.76
Qty:
Displaying: 1 - 15 of 15 Matching Items