Leather
Acrylic/PTFE
View:
Active Filters :
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:805892
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:801844
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:801891
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805053
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805054
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805087
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805090
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805091
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:303114
- Combination Openings, 1 Toggle Switch and 1 Decorator, Two Gang, Ivory
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
CSA File Number 17695
Qty:
Part #:303117
- Combination Openings, 1 Toggle Switch and 1 Decorator, Two Gang, White
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
CSA File Number 17695
Qty:
Part #:303121
- Combination Openings, 1 Toggle Switch and 1 Duplex Receptacle, Two Gang, Ivory
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
CSA File Number 17695
Qty:
Part #:303122
- Combination Openings, 1 Toggle Switch and 1 Duplex Receptacle, Two Gang, White
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
CSA File Number 17695
Qty:
Part #:303152
- Combination Openings, 1 Toggle Switch and 1 Duplex Receptacle, Two Gang, Ivory
Qty:
Part #:303132
- Decorator Openings, One Gang, Ivory
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
CSA File Number 17695
Qty:
Part #:303142
- Duplex Receptacle Openings, One Gang, Ivory
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Individually wrapped with color-matching screws.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303151
- Duplex Receptacle Openings, One Gang, Ivory
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
Standard
UL 514
Qty:
Part #:303146
- Duplex Receptacle Openings, Two Gang, Ivory
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303147
- Duplex Receptacle Openings, Two Gang, White
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:304281
- Duplex Receptacle Openings, Three Gang, White
Molded of non-combustible mar-proof material.
Available in 'SP' series in Standard, Junior-Jumbo, and Jumbo sizes.
Seven standard colors available -- Ivory, White, Brown, Gray, Black, Red, and Light Almond.
Individually wrapped with color-matching screws.
Resistant to discoloration, grease, oil, solvent, and moisture.
Nominal thickness, .070 inch.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:539-35-969
- Tuff-Tote&trade Tool Carrier, Premium Leather w/Strap
The Tuff-Tote® Tool Carrier comes with 4 center screwdriver slots, 2 interior compartments, 2 divided outside pockets, and 4 outside tool loops. Its unique stand-alone design keeps tools standing upright for easy identification and access. Tool carrier comes with removable should strap to help relieve lower back strain. It also has rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long term-durability, in addition to an oil and moisture-resistant reinforced bottom.
Lifetime warranty
$
292.78
Qty:
Part #:334-HS24
- Dixon Worm Gear Clamp
Attributes
Weight
0.045 lb
Break Quantity
10
Mandatory Package/Box Quantity
1
Material
SAE 300 Series Stainless Steel
Component Material
Zinc-Plated Steel screw
Style
Style HS
Width
1/2"
Torque
50 in. lbs.
Hose OD To
2" (51 mm)
Hose OD From
1-4/64" (27 mm)
$
1.23
Qty:
Part #:334-HS188
- Catalog Pg 460. Package Qty Only Y:
$
4.78
Qty:
Displaying: 1 - 23 of 23 Matching Items