Evco
Adenna
View:
Active Filters :
- Brand: Adenna Evco Hilti Ridge Tool Company
Part #:312560
- Reclaimed Mixed Knits, Colored, Bulk (135-50), 50lbs
Features
Mixed colored t-shirts and polo shirts
Good absorbency and softness
Medium weight
Packed in Corrugate
This item is available in 5, 10, 25 & 50 lb boxes and 10, 25 & 50 lb brickpacks
Case Height
18.00
Case Length
19.00
Case Weight
50.00
Case Width
18.00
Cases Per Pallet
18
Color
Assorted Colors
Material
Mostly Cotton
Product Category
Reclaimed Knits
Put-up
50 lbs/cs
Size
14"-18" x 14"-18"
$
0.05
Qty:
Qty:
$
0.04
Qty:
$
0.04
Qty:
Part #:503013
- TaskBrand® P60 Premium Series - Hydrospun Interfold, 9"X16.75", Dispenser, 125/DISP, 10DISP/CS (N-P060IDW)
Features
Medium duty hydrospun substrate
Key Features
Durable Cloth-like feel Absorbent Low lint Resistant to many solvents
Applications
Automotive paint prep Solvent application Lubricants Glass and mirror cleaning General hand wiping
Qty:
$
0.05
Qty:
Part #:503947
Qty:
Qty:
#12 x 3in Hex Washer Head Self-Drilling #3 TEKS Drill Point Screw - 50/Box (Replaces Evco 12x3DP100)
Qty:
Part #:510741
- Health Gards® Toilet Seat Covers
Features
A cost effective, sanitary method of meeting personal hygiene needs in public restrooms
Self-disposing
Biodegradable
Part #:511046
$
0.30
Qty:
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
Part #:521021
$
0.06
Qty:
Part #:917-37940
- Manual Threader Pipe & Bolt Dies
Qty:
Part #:502583
- 2-A 1/8" - 2" Heavy Duty Pipe Cutter
Qty:
Part #:808146
- HEAVY-DUTY STRAIGHT PIPE WRENCHES&bull Straight Pipe Wrenches have a sturdy, ductile-iron housing andan I-beam handle with a full floating forged hook jaw, featuringself-cleaning threads with replaceable hook and heel jaws.&bull Heavy-duty pipe wrenches comply with federal specificationsGGG-W65IE, Type II, Class A.
8", 1" Pipe Capacity
Qty:
Displaying: 1 - 24 of 549 Matching Items