3M
Adhesives, Sealants, and Tapes
View:
Active Filters :
- Main Category: Adhesives, Sealants, and Tapes
- Brand: 3M Devcon
Part #:300986
- Details
Extra sturdy polyester backing resists abrasion, moisture and scuffing for lasting hold
Adhesive sticks quickly to a variety of materials, including those with high recycled content
Securely closes double and triple walled corrugated cartons and fiberboard
Available with custom printing for security and/or branding
Provides high quality, consistent performance with easy unwind
Scotch® Box Sealing Tape 355, one of the very best performers in our Scotch® polyester line of tapes, securely closes double and triple walled corrugated cartons, including those with high recycled content, saving time and reducing closure failures. The polyester backing resists moisture, abrasion and scuffing to hold strong throughout the shipping process.
$
25.68
Qty:
Part #:303052
- Details
Designed for heavy duty use in MRO/construction applications
Removes cleanly for up to three months when applied indoors
Sticks immediately and stays on for up to one year without deterioration
Strong water-resistant backing resists wear and light abrasion
Provides a tight, moisture-resistant seal in many containment situations
Conforms to irregular surfaces without lifting
Save time and hassle of removing sticky or dried-on residue
Constructed of polyethylene film laminated to cloth with a rubber adhesive, this durable tape resists curling and tears off the roll cleanly for easy application in MRO/construction. Our 3M&trade Heavy Duty Duct Tape 3939 has a unique construction that allows for permanent and temporary applications. It is removable with little or no adhesive residue up to three months after application.
A Tape with Versatility Originally developed for heating, ventilating and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. Our 3M&trade Heavy Duty Duct Tape 3939 was tested according to UL723, ASTM E84. Due to its unique design, it is an excellent choice for general indoor application in MRO/construction. The tape can be used at temperatures as high as 200°F for up to 30 minutes. 3M&trade Heavy Duty Duct Tape 3939 comes with a classic, silver-colored backing. Our sturdy cloth-reinforced tape can be torn from the roll and sticks instantly, providing a wide range of convenient solutions. Recommended Applications
Patching
Bundling
Reinforcing
Tabbing
Taping/splicing insulation
Capping pipe
Securing conduit ends
Marking
Labeling
Temporary repair
Hanging polyethylene drapes
Protecting against light sandblast overspray
$
17.81
Qty:
Part #:311745
- Looking for a reliable and high-quality electrical tape to handle all your electrical needs? Look no further than 3M's 33+ Black Electrical Tape.
Crafted from premium-grade materials, this tape boasts exceptional durability and long-lasting performance. Whether you're working on a DIY project at home or tackling a complex industrial job, 3M's 33+ Black Electrical Tape is the perfect choice.
One of the standout features of this tape is its excellent electrical insulation properties. With a dielectric strength of up to 7500 volts, it provides superior protection against electrical current, making it ideal for use in a variety of electrical applications.
But that's not all. This tape also offers superior adhesion, making it easy to apply and ensuring it stays in place even in harsh conditions. Its pressure-sensitive adhesive ensures a strong hold, while its stretchy properties allow it to conform to a wide range of surfaces.
Plus, with its sleek black color, 3M's 33+ Black Electrical Tape is perfect for use in all kinds of applications, from household repairs to automotive work.
Part #:312697
-
Adhesion to Steel
2,2 N/cm
Adhesive Material
Pressure Sensitive Rubber Adhesive, Rubber Resin
Adhesive Type
Rubber
Application
Electrical Maintenance
Application/Industry
Commercial Construction, Industrial Construction, Irrigation, Maintenance and Repair Operations, Mining, Residential Construction, Solar, Utility, Wind Power
Backing Material
Polyvinyl Chloride, Vinyl
Backing Thickness (Metric)
0.25 mm
Brand
Scotchrap&trade
Breaking Strength (Imperial)
20 lb/in
Chemical Resistant
Yes
Color
Black, Black
Electrolytic Corrosion Factor
0.9
Elongation at Break
200%
Flame Retardant
Yes
High Temperature Rating
176°F (80°C)
Installation Temperature Range
10&ndash150°F (-12&ndash65°C)
Length
100 Linear Foot
Length (Metric)
30.5 m
Low Temperature Rating
32°F (0°C)
Material
PVC
Maximum Operating Temperature (Celsius)
80 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
176 Degree Fahrenheit
National Stock Number
5970002554807, 5970010184304, 5970010241691, 5970016098789, 5970014646819, 7510015161937
Operating Temperature (Celsius)
Up to 80 °C
Operating Temperature Range (Celsius)
-48 °C to 80 °C
Operating Temperature Range (Fahrenheit)
-55 °F to 176° F
Performance Level
Professional Grade
Printed Tape
No, Yes
Product Markets
Electrical Construction, Electrical MRO, Power Distribution
Product Type
Corrosion Protection Tapes
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
RoHS 2011/65/EU compliant without exemption Important RoHS information
Rolls per Carton
1
Rolls per Case
10, 12, 16, 24, 48, 8
Service Temperature Range
-55&ndash176°F (-48&ndash80°C)
Shelf Life
5 Year
Solution for
Access Network FTTH/FTTB/CATV
Specifications
VDE 0340-TEIL1
Tape Color
Black
Tape Grade
Premium
Tape Type
Corrosion Protection
Thickness
10 mil
Thickness (Metric)
0.25 mm, 0.254 mm
Total Thickness
0.25 mm
UV Resistant
Yes
Width
1 in, 1.5 in, 152 in, 2 in, 25 in, 3 in, 4 in, 50 in
Width (Metric)
101.6 mm, 102 mm, 152 mm, 25 mm, 25.4 mm, 50 mm, 50.8 mm, 51 mm, 76.2 mm
Part #:500440
- Product Details
Typical Use
Bonds metals, fabrics, ceramics, glass, wood, and concrete (in combinations).
Brand
5 Minute Epoxy
Chemical Composition
Epoxy resin polyamines
Color
Light Amber
Components
2 part
Cure System
Room Temperature
Cure Time
12h @ 22.2 °C
Dielectric Strength
490 V/mil
Elongation
1%
Flash Point
>204.4 °C
Hardness
85 D
Impact Resistance
5.5 ft-lb/in^2
Mix Ratio
11 by volume 11 by weight
Peel Strength
2 to 3 pli
Service Temperature
-40 to 93.3 °C
Shear Strength
1,900
Specific Gravity
1.17
Viscosity
Mixed 10,000
Working Time
3 to 6min @ 22.2 °C
$
19.47
Qty:
Part #:508073
- Devcon® Plastic Steel® Putty (A)The original metal-filled epoxy putty, itis ideal for repairing areas wherewelding or brazing would be impractical.Can be drilled, tapped and machined.Conforms to the requirements ofMIL-PRF-24176C, Type I.
$
83.50
Qty:
Part #:508082
- Description
Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.
Key Features
Repairs air conditioning system components
Listed under NSN Stock #8030-00-051-4511 #8030-00-670-8553
Bonds to aluminum and many other metals
Fills porosity in aluminum castings
Can be machined drilled or tapped using conventional metalworking tools
Qualifies under Mil Spec MIL-PRF-24176C, Type II
Open Time 60 Minutes
Gap Fill 0.0625&Prime &ndash 0.75&Prime
Devcon® Metal Repair PuttiesMetal-filled epoxy putties allow fast, economical, permanent repairs to plantand equipment cure quickly and resist corrosion and harsh chemicals
$
124.50
Qty:
Part #:510290
- Description
High-performance, brushable urethane coating that cures to a medium hard rubber (Hardness Shore A 86) for protection against wear due to abrasion and impact.
Key Features
Applies in thicknesses of 50 mils in one application
Protects hoppers, chutes, pump impellers, feeder bowls, and fans
Used with Flexane® primers for maximum adhesion to metals, rubber, wood, fiberglass, and concrete
Open Time 45 Minutes
Color Black
Unit Size 1lb
Part #:508074
- Devcon® Plastic Steel® Putty (A)The original metal-filled epoxy putty, itis ideal for repairing areas wherewelding or brazing would be impractical.Can be drilled, tapped and machined.Conforms to the requirements ofMIL-PRF-24176C, Type I.
$
387.74
Qty:
Part #:508083
- Description
Aluminum-filled pourable epoxy for making molds, patterns, and holding fixtures.
Key Features
Mixes and pours easily
Hardens in just over 1 hour cures in 16 hours
Can be cast over models for accurate reproduction of details
Low viscosity permits reproduction of delicate or intricate parts
Listed under NSN stock #8030-00-229-8740 #8030-00-159-5032
Open Time 75 Minutes
Gap Fill .0625&Prime &ndash .075&Prime
Liquids and Metal Casting CompoundsPourable epoxy compounds provide accurate detail reproductionand are ideal for making molds, patterns, holding fixtures andforming dies.
Part #:509841
- Description
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes and reaches functional strength in 1 hour.
Key Features
Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
Forms a clear hard rigid bond self leveling liquid in minutes
Listed under NSN Stock#8040-00-264-6816#8040-01-067-6126
Functional strength in 1 hour
100% reactive, no solvents
Low viscosity (10,000 cps)
Open Time 4-7 minutes
Fixture Time 10-15 minutes
Color Clear
Mix Ratio 11
Working Time Min 3
Working Time Max 6
Fixture Time Min 10
Fixture Time Max 15
Devcon® advanced epoxy adhesives are used for structural bonding, potting and encapsulating,and come in a variety of cure times and package sizes.
$
11.28
Qty:
Displaying: 1 - 24 of 57 Matching Items