Easyheat
Adhesives, Sealants, and Tapes
View:
Active Filters :
- Main Category: Adhesives, Sealants, and Tapes
- Brand: Easyheat Federal Process Red Devil Sprayon
Part #:503794
- Foam & Fill® Large Gaps & Cracks Expanding Polyurethane Sealant Case Pack (12 oz.)
Foam & Fill®Large Gaps & Cracks Expanding Polyurethane Sealant is quick and easy to use. It expands to fill holes, cracks, gaps and voids around windows, doors, pipes, outlets, vents and foundations. This insulating foam forms an airtight, waterproof bond and seals out drafts, moisture and pests. Cured foam can be sanded, painted or stained. Contains no HCFCs or CFCs so it is safe for the environment.
$
6.18
Qty:
Part #:509495
Qty:
Part #:510411
-
Designed for use on difficult service conditions associated with stainless steel, aluminum & brass threaded connections.
Helps prevent seizing & galling
UL® Listed thread sealant 561R
Meets Mil Spec MIL-T-27730A
Temperature Range -450deg F to 550deg F
Pressure Range 300psi max
High Density PTFE
NOT for oxygen.
$
9.10
Qty:
Part #:800615
- Chemical Resistance Excellent resistance to gasoline, kerosene, petroleum solvents, diesel fuel, propane, butane, LPG, water, cutting oils. NOT oxygen. Set Time Depending on conditions, up to 24 hours. Dries to the touch. Packaging Available in 1/4 pint, 1 pint and pint cans with brush-top lids. Also available in gallons with friction top:
$
68.77
Qty:
Part #:804193
- &bull Provides protection against seizing, galling, rust and corrosion at three high-temperature levels. &bull Brush on nuts, bolts, screws, bushings, cam rollers, shafts, sleeves, couplings, con vey ers, motors, pumps, turbines and valves etc. &bull Speeds assembly and facilitates disassembly. &bull Industry applications include steelmills, forges, foundries, die casters, refining and chemical installations, marine services, farm and con struc tion equipment, power and utility plants, paper and pulp mills and gen er al plant main te nance. &bull Non-hardening, non-dripping.
$
20.93
Qty:
Qty:
Part #:800123
- &bull Non-hardening, non-toxic, opaque, dark green paste designed specifically for ethanol blended gasoline including E10 and E85 (for 100% ethanol or 100% methanol applications &ndash use Gasoila 100). &bull Provides a positive seal on pipe threads, joints, fittings, hoses, nozzles, pump assemblies, oil burners, hydraulics, bolts, compressors, engines, motors, fuel lines and couplings.&bull For use on brass, copper, stainless steel, aluminum, black pipe, tin & galvanized pipe.&bull Excellent resistance to gasoline, ethanol blended gasoline such as E10 and E85, petroleum solvents, kerosene diesel oil, BioDiesel, propane, jet fuels, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam and potable water.&bull NOT for use with Oxygen.&bull Temperature Range -100°F to 600°F (-74°C to 318°C).&bull Pressure Range Up to 10,000 psi when sealing liquids & up to 3,000 psi with gases. &bull One year shelf life.
$
47.21
Qty:
Part #:800453
- · For Damaged, Irregular, Mis-cut and Straight Threads · Vegetable Oil Base · Thick Consistency, 10-15% more Solids than Conventional SealantsTYPE Oyster White Paste with PTFE
$
39.80
Qty:
Part #:801493
- &bull Soft-setting, non-toxic, PTFE paste. &bull Provides a positive seal on pipe threads, joints, fittings, hoses, noz zles, LPG cylinders, pump as sem blies, oil burners, hydraulics, compressors, engines, motors, hous ings, plugs, fuel lines, cou plings and more. &bull Use on brass, copper, stain less steel, aluminum, black pipe, tin, galvanized, ABS, CPVC, PVC plas tics, nylon, poly eth yl ene, polypro py lene, polybutylene and more. &bull Excellent resistance to gasoline (up to 20% alcohol and petroleum blends), petroleum solvents, ker o sene, diesel oil, propane, butane, LPG, cutting oils, ammonia, aliphatic solvents, acids, steam, potable water, com pressed air and more. NOT for use on oxygen. &bull Remains pliable in cold temperatures. &bull Temperature Range -100°F to 600°F (-74°C to 318°C). &bull Pressure Range To 10,000 psi sealing liquids to 3,000 psi sealing gases. &bull One year shelf life when stored at 40°F to 80°F (5°C to 27°C). &bull For alcohol blended gasoline ethanol see E-Seal.
$
18.10
Qty:
Part #:803041
- &bull Provides protection against seizing, galling, rust and corrosion at three high-temperature levels. &bull Brush on nuts, bolts, screws, bushings, cam rollers, shafts, sleeves, couplings, con vey ers, motors, pumps, turbines and valves etc. &bull Speeds assembly and facilitates disassembly. &bull Industry applications include steelmills, forges, foundries, die casters, refining and chemical installations, marine services, farm and con struc tion equipment, power and utility plants, paper and pulp mills and gen er al plant main te nance. &bull Non-hardening, non-dripping.
$
10.81
Qty:
Part #:310201
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:300793
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:300622
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:300601
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:300791
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:300891
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:310202
- Features
Fixed Resistance, Pre-terminated. For Commercial and Residential Applications
Keeps water flowing at ambient temperatures down to -40 °F (-40 °C)
Cables are rated at 7 Watts per 1 ft (0.30 m)
Built-in thermostat turns on at +38 °F (+3 °C) or below and turns off at +45 °F (+7 °C) and above
Plugs into a standard 120 Vac outlet, must be GFCI protected
Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high-low temperature) outer jacket
Protects metal and plastic water-filled pipes up to 1-1/2 in (38.1 mm) in diameter
Pre-assembled and ready to install
Available in 3 ft (0.9 m) increments up to 18 ft (5.5 m) and longer increments up to 80 ft (24.4 m)
Integral thermostat saves energy by powering the cable only when needed
One year limited warranty
Qty:
Part #:510554
- FIRE STOP LC150RD Sealant Sealant
FIRE STOP LC150RD Sealant is a versatile intumescent product intended for firestopping a wide array of applications in small commercial or grouped residential construction or other structures with similar applications. It seals penetration openings against the spread of fire, smoke, gases and water. LC150RD is fully tested to ASTM E814 (UL1479) and meets Class A finish requirements for Flame Spread and Smoke Development when tested in accordance with ASTM E84 (UL723). LC150RD provides up to a 2 hour fire rating for typical service penetrations through concrete or wood floors, concrete or masonry walls, as well as gypsum board walls. LC150RD is also acoustically tested, demonstrating excellent sound attenuation properties.
Tested & Classified for Fire Resistance
&bullMetallic Pipes including steel, iron, or copper pipe and tubing&bullNonmetallic Pipes, Conduits & Tubing including PVC, CPVC, ABS, and PEX. &bullElectrical & Electronic Cabling including service entrance, power distribution, computer, telephone, television.&bullMetal Ductwork including HVAC, bath and dryer vents.&bullInsulated Pipes including heating, cooling, and condensation applications.&bullComplete Wood Floor firestopping package for electrical, plumbing, HVAC, telephone, and television.
$
13.80
Qty:
Part #:503821
- Pre-Mixed Glazing Compound (1 Quart Tub)
A premium white, oil based glazing compound specially formulated for installing glass in wood or metal sashes. Forms airtight and watertight seal. Takes any paint. Oil-based.
Features
&bull Superior Handling Characteristics&bull Knifes Exceptionally Well&bull Remains Flexible&bull Excellent Adhesion on Metal or Wood&bull Won't Sag or Shrink&bull Resists Chalking & Cracking&bull Paintable&bull 24 Hour Cure Time&bull Meets ASTM C669-95 & Fed Spec TT-G-410E
Product Details
1 Quart (.96 liter)TubColor White
Documentation
SDS TDS FAQ
$
7.94
Qty:
closeout
Part #:500013
- CLOSEOUTS Only 8 Left!
-
Resistance
Water
Applicable Materials
Plywood Wood Concrete Plastic Most Metals
Applications
Panel Brick Subfloor Floor Tile Plaster
Wt.
1.03 Lb
Color
Tan
Packing Type
Cartridge
Capacity Vol.
10 1/2 Oz
$
2.48
Qty:
Part #:310554
- HVAC Caulk Extreme Temperature Silicone 10.1 Fl. Oz. Cartridge Aluminum
Extreme Temperature HVAC/R Silicone Sealant is a superior quality sealant made especially for HVAC/R applications. It provides long-lasting weather-resistant seals and offers excellent adhesion, flexibility, and durability. It adheres to metal and other building materials and remains flexible from -60°F to 400°F.
Product Info
Features
Weather Resistant
Long-lasting Flexibility
Excellent Adhesion
Temperature Range -60°F to 400°F
Not Paintable
Will Not Crack, Shrink or Peel
Product Specs
Meets or Exceeds
Fed. Spec. TT-S-0020C
Class A, TT-S-001543A
Class A, ASTM C921
Adheres to
Metal
Aluminum
Concrete
Glass
Fiberglass
Vinyl
Plastic
Use On
Air Conditioners
Ducts, Furnaces
Refrigerators
Vents
Pipes
Window and Door Frames
Skylights
Gutters
Aluminum Siding
Trim
Gutters
$
8.22
Qty:
Displaying: 1 - 21 of 21 Matching Items