Apollo
Aerokroil
View:
Active Filters :
Part #:700031
- 3/4in Jamesbury 3000 Series Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball. PTFE seats with graphite seal. Jamesbury Part # MA0015380332236MLC
Qty:
Part #:700067
- 3/4in Jamesbury 3000 Series Fire-Tite Threaded Stainless Steel Ball Valve. Stainless steel body with stainless steel ball and stem. Filled PTFE seats with graphite seal. Jamesbury Part # MA0015383333600MLC
Qty:
Part #:701050
- 3/4in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00059179FB2236XTB
Qty:
Part #:701187
- 3/4in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Stainless Steel Ball Valve. Stainless steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00059239FB3600XTB
Qty:
Part #:702655
- 3/4in Jamesbury 5H Value-Line Series High Pressure Threaded Ball Valve. Carbon steel body with stainless steel ball and 17-4PH stem. Seats are Acetal Homopolymer with PTFE seals. Jamesbury Part # MA0015371 5H22HBRT
Qty:
Part #:702976
- 3/4in Jamesbury Clincher Series 2000 2-Piece Threaded Ball Valve. Brass body with brass ball and stem. Seats and seals are PTFE. Assembled dry, no silicone. Jamesbury Part # MA0015356 211100TTC061
Qty:
Qty:
Qty:
Part #:503704
- 3/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
Qty:
Part #:700853
- 3/4in Jamesbury Clincher Series 2000 2-Piece Fire-Tite Threaded Ball Valve. Stainless steel body with stainless steel ball and stem. Seats and seals are filled PTFE with secondary graphite seal. Jamesbury Part # MA0015345233600MTA1
Qty:
Part #:710016
-
Category
Ball Valves
Subcategory
Carbon Steel
Series Type
2 (Two) Piece
Threaded, 2-Piece, Std. Port, Forged Carbon Steel Ball Valve, 2000 CWP to 1", 1500 CWP to 2", Sizes 1/4" to 2" (DN 8 to DN 50)
Qty:
Part #:503692
- 3/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Qty:
Qty:
Qty:
Part #:710099
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:500377
- 3/4" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:501965
- 14" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:507842
- 1/2" Drive SAE 3/4" Impact Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:507863
- 3/4" Drive SAE 3/4" Impact Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:501440
- 7" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:200516
- Features
&bull Make 45-degree flares with these high-qualityhammer flaring tools for copper tubing.&bull Ideal for use with Type K soft copper tube.&bull Hardened and tempered to resist wear.
Qty:
Displaying: 1 - 24 of 105 Matching Items