Cantex
Akro-Mils
Part #:506651
- 30128
Akro-Mils industry leading 4" tall Shelf Bins are constructed of durable industrial-grade plastic and provide a neat and attractive storage solution. The superior construction of these affordable plastic storage bins allows them to be fully loaded without bulging or cracking and multiple divider slots allow for a greater number of storage options. Akro-Mils Shelf Bins are a superior alternative to weak and flimsy cardboard bins. 12", 18" and 24" deep bins work with standard wire or steel shelving. One-piece construction is waterproof and unaffected by grease or oil. Works in temperatures down to -20°F. Make the most of your Shelf Bins with optionalBin Cupswhich subdivide bins and lift out easily for transport.
Qty:
Part #:516600
- 30130
Akro-Mils industry leading 4" tall Shelf Bins are constructed of durable industrial-grade plastic and provide a neat and attractive storage solution. The superior construction of these affordable plastic storage bins allows them to be fully loaded without bulging or cracking and multiple divider slots allow for a greater number of storage options. Akro-Mils Shelf Bins are a superior alternative to weak and flimsy cardboard bins. 12", 18" and 24" deep bins work with standard wire or steel shelving. One-piece construction is waterproof and unaffected by grease or oil. Works in temperatures down to -20°F. Make the most of your Shelf Bins with optionalBin Cupswhich subdivide bins and lift out easily for transport.
$
5.09
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:301272
- CANTEX 6141625 is a 1 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.21
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:301356
- CANTEX 6141632 is a 4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
2.20
Qty:
Part #:301402
- CANTEX 5140112 is a 4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
3.02
Qty:
Part #:301405
- CANTEX 5133828 is a 2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
2.09
Qty:
Part #:301414
- CANTEX 5133832 is a 4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
28.17
Qty:
Part #:301487
- CANTEX 5133821 is a 4 in. x 90-Degree x 36 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
87.11
Qty:
Part #:301544
- CANTEX 6441001 is a 1/2 in. Enviro-Flex Straight Liquidtight Connector used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting Features Use with Enviro-Flex Liquid Tight Conduit For use in wet or damp locations Durable non-conductive PVC will not rust or corrode Polypropylene sealing ring UL listed
$
2.45
Qty:
Part #:301770
- CANTEX 5133668 is a 2 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
23.33
Qty:
Part #:303374
- CANTEX 5133410 is a 2-Gang Weatherproof Blank Cover designed for use with exposed weatherproof boxes
Features
Includes gasket and screws
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
UL listed and UL Marine listed
Made in USA
$
5.50
Qty:
Part #:303756
- CANTEX 5133836 is a 2 in. x 90-Degree x 24 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
22.99
Qty:
Part #:304347
- CANTEX 5133825 is a 1 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree Features Schedule 40 Nonmetallic PVC construction for strength and durability For indoor or outdoor use Suitable for aboveground or buried Plain-end connections are solvent weld ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3 Made in USA
$
1.56
Qty:
Part #:305525
- CANTEX 5133743 is a 2 in. Service Entrance Caps which is used as the entry point for overhead power and communication wires into a building
Features
Prevents precipitation from entering the conduit into the building
One 1/2 in. and two 3/4 in. knockouts for wire options
Material is Rigid PVC
UL Listed
Made in USA
$
20.90
Qty:
Part #:305527
- CANTEX 5133735 is a 2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.52
Qty:
Part #:510683
- Plastic Storage Cases include adjustable dividers for customized storage of small parts and supplies. A unique grid design in the lid prevents items from spilling into other compartments. Made of clear industrial-grade polymers for durability and visibility of contents. Molded-in &ldquofeet&rdquo allow cases to sit upright. Case is 14-3/8" x 9-1/2" x 2-1/2".
$
16.68
Qty:
Part #:511284
- 30120
Akro-Mils industry leading 4" tall Shelf Bins are constructed of durable industrial-grade plastic and provide a neat and attractive storage solution. The superior construction of these affordable plastic storage bins allows them to be fully loaded without bulging or cracking and multiple divider slots allow for a greater number of storage options. Akro-Mils Shelf Bins are a superior alternative to weak and flimsy cardboard bins. 12", 18" and 24" deep bins work with standard wire or steel shelving. One-piece construction is waterproof and unaffected by grease or oil. Works in temperatures down to -20°F. Make the most of your Shelf Bins with optionalBin Cupswhich subdivide bins and lift out easily for transport.
Qty:
Part #:511362
- 30120
Akro-Mils industry leading 4" tall Shelf Bins are constructed of durable industrial-grade plastic and provide a neat and attractive storage solution. The superior construction of these affordable plastic storage bins allows them to be fully loaded without bulging or cracking and multiple divider slots allow for a greater number of storage options. Akro-Mils Shelf Bins are a superior alternative to weak and flimsy cardboard bins. 12", 18" and 24" deep bins work with standard wire or steel shelving. One-piece construction is waterproof and unaffected by grease or oil. Works in temperatures down to -20°F. Make the most of your Shelf Bins with optionalBin Cupswhich subdivide bins and lift out easily for transport.
$
3.41
Qty:
Part #:516601
- 30110
Akro-Mils industry leading 4" tall Shelf Bins are constructed of durable industrial-grade plastic and provide a neat and attractive storage solution. The superior construction of these affordable plastic storage bins allows them to be fully loaded without bulging or cracking and multiple divider slots allow for a greater number of storage options. Akro-Mils Shelf Bins are a superior alternative to weak and flimsy cardboard bins. 12", 18" and 24" deep bins work with standard wire or steel shelving. One-piece construction is waterproof and unaffected by grease or oil. Works in temperatures down to -20°F. Make the most of your Shelf Bins with optionalBin Cupswhich subdivide bins and lift out easily for transport.
$
2.99
Qty:
Part #:300031
- CANTEX 5133737 is a 3/4 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces
Features
Two holes in the feet of the clamp allow mounting the screws or nails
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 & 80 conduit
UL and CSA listed
Made in USA
Requires two #10 screws for installation (not included)
$
0.26
Qty:
Part #:301277
- CANTEX 6141626 is a 1-1/4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.27
Qty:
Displaying: 1 - 24 of 79 Matching Items