Loctite
Allanson
View:
Active Filters :
- Brand: Allanson Loctite Proto Star Pipe Products
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:201202
- Comes with 5-1/4in HD Lid Only "Water" CLS 35 VBLIDHD35 Top 26in Botton 36in.
$
224.00
Qty:
Part #:204311
- Top 24in 19lbs, Bottom 39in 22lbs
Material Cast Iron Per ASTM A48 Class 30B
Screw Type Curb Box
$
117.70
Qty:
Part #:204343
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
$
7.00
Qty:
$
21.00
Qty:
Qty:
Part #:500993
- Makes replacement, high performance O-rings in less than a minute. This compact kit contains four 3-foot lengths of common diameters of Buna N (nitrile) cord, LOCTITE® 404® Quick Set&trade Instant Adhesive, O-ring fixture, blade, a waterproofing solution, and a cleanup solution. Cut and splice tool and standard size cord stock are available. Included Cord Sizes 3/32 in., 1/8 in., 3/16 in., 1/4 in.
1 oz. waterproofing solution
# 74126 1 oz. cleanup solvent,
# 75326 1/3 oz. 404® Quick Set&trade instant adhesive,
# 46551 Fixture and cutting blade
98613 Precision O-Ring Cut & Splice Tool
8900591 O-Ring Stock, Buna N, 1/4 in. x 3 ft.
8900589 O-Ring Stock, Buna N, 1/8 in. x 3 ft.
8900588 O-Ring Stock, Buna N, 3/32 in. x 3 ft.
8900590 O-Ring Stock, Buna N, 3/16 in. x 3 ft.
Qty:
Part #:507247
- Technical Information
Agency Approvals / Specifications
UL
Application Method
Dispense System, Manual
Applications
Pipe Sealing, Thread Sealing
Breakaway Torque, Steel M10
12.0 N·m (110.0 in./lb. )
Color
White Off White
Cure Type
Anaerobic Cure
Key Characteristics
Immediate Low Pressure Sealing, Oil Tolerant, Strength Low Strength, Temperature High Temperature, Thixotropic
Operating Temperature
-55.0 - 200.0 °C (-65.0 - 400.0 °F )
Physical Form
Paste
Substrates
Metal, Metal Aluminum, Metal Steel - Galvanized Steel, Metal Steel - Stainless Steel, Thread Type Coarse, Thread Type Tapered
Technology
Acrylic
Viscosity, 20 RPM
540000.0 mPa·s
$
100.98
Qty:
Part #:506000
- Technical Specs Item Gasket Sealant Type Slow Dry Flexible Cure Size 7 oz Color Black Temp. Range -65F to 400 Degrees F Specific Gravity 1.5 Viscosity Paste Full Cure Remains Tacky Begins to Harden 4 hr Substrates Excellent for Sealing Flexible Metal to Metal Assemblies Characteristics Oil Resistant Application Cover Plates, Hose Connections, Valve Cover and Oil Pan Gaskets
$
15.20
Qty:
Part #:508141
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 150 to 450 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 454 Gap Fill 0.01 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General purpose, bonds a variety of porous surfaces Tensile Strength 3200 psi Standards 29 CFR 1910.1200 Application For Difficult to Bond Surfaces, Irregular Rough and Acidic Surfaces, Use on Porous Substrates
$
8.22
Qty:
Qty:
Qty:
Qty:
Qty:
Part #:521246
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 90 cPs Container Type - Adhesives Bottle Container Size - Adhesives 20 g Adhesive Color Clear Series 401 Gap Fill 0.005 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics Resealable Squeeze Package Tensile Strength 3200 psi Standards 29 CFR 1910.1200, CFIA Application Bonds A Wide Range Of Materials Including Metals, Plastics, and Elastomers
$
30.19
Qty:
Part #:521020
- Product details Legacy part 51005 10 oz Brush Top Can Exclusive Formula Suspends Copper and Graphite in a High-Quality Grease Protects Metal Parts From Corrosion, Galling and Seizing at Temps to 1800 °F Use On Metals, Plastics and Non-Metallic Gaskets description Exclusive formula suspends copper and graphite in a high-quality grease. applications Electrically conductive Aluminum Soft metals features Protects metal from rust and corrosion Resists seizing and galling Temperatures to 1,800 F (982 C) CARB Complies with VOC regulations as detailed by the California Air Resource Board OTC Complies with VOC regulations as detailed by the Ozone Transport Commission Mil-PRF907-F CFIA approved Equipment associated with petroleum chemicals, steel mills, paper plants, marine and foundries
$
31.92
Qty:
Part #:521212
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Medium Color White Gas Pressure Range 10,000 psi Begins to Harden 24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 400 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.21 @ 25 Degrees C Viscosity 350,000cP For Use With NF Application Thread sealing
$
24.92
Qty:
Part #:516691
- Technical Specs
Patching Application Mortars and Patching Cements Item Flooring/Grouting Concrete Repair Color Gray Number of Components 2 Container Size 1 gal Container Style Pail Coverage 4.8 sq ft VOC Less Than 1.0%, 10g/L Flash Point Greater Than 212 Degrees F Starts to Harden Not Specified Full Cure Time Not Specified For Use On Surface Material Concrete, Glass, Steel, Wood Application 000 PSI, Chemically Resistant, Compressive Strength 13, Rapid Setting, Summer and Winter Additives Also Available to Aid Cure Times Characteristics 2-Part, Rapid Set Time Meets OSHA Cured Color Family Grays
Qty:
Part #:522125
- Technical Specs
Item Socket Set
Standard Socket Count/Style (14) 12-Point
Deep Socket Count/Style (12) 6-Point, (2) 12-Point
Deep Socket Style/Size 1 in, 1/2 in, 11/16 in, 11/32 in, 13/16 in, 3/4 in, 3/8 in, 5/16 in, 5/8 in, 7/16 in, 7/8 in, 9/16 in, Deep 12-Point 15/16 in, Deep 6-Point 1/4 in
Flex Socket Count/Style 0
Socket Size Range 1/4 in to 1 in
Drive Type Hand
Drive Size 3/8 in
Measurement Type SAE
Sockets Included (1) 1 in Deep 12-Point, (1) 1 in Standard 12-Point, (1) 1/2 in Deep 6-Point, (1) 1/2 in Standard 6-Point, (1) 1/4 in Deep 6-Point, (1) 1/4 in Standard 6-Point, (1) 11/16 in Deep 6-Point, (1) 11/16 in Standard 6-Point, (1) 11/32 6PT, (1) 11/32 in Deep 6-Point, (1) 13/16 in Deep 6-Point, (1) 13/16 in Standard 6-Point, (1) 15/16 in Deep 12-Point, (1) 15/16 in Standard 12-Point, (1) 3/4 in Deep 6-Point, (1) 3/4 in Standard 6-Point, (1) 3/8 in Deep 6-Point, (1) 3/8 in Standard 6-Point, (1) 5/16 in Deep 6-Point, (1) 5/16 in Standard 6-Point, (1) 5/8 in Deep 6-Point, (1) 5/8 in Standard 6-Point, (1) 7/16 in Deep 6-Point, (1) 7/16 in Standard 6-Point, (1) 7/8 in Deep 6-Point, (1) 7/8 in Standard 6-Point, (1) 9/16 in Deep 6-Point, (1) 9/16 in Standard 6-Point
Qty:
Part #:134-J52212
- Country of Origin US:
Qty:
Qty:
Part #:510817
- Country of Origin US :
Qty:
Displaying: 1 - 24 of 869 Matching Items