Brady
Allpax
Part #:304953
- Product Highlights
For Use with Printer BBP®30 Sign & Label Printer, BBP®31 Sign & Label Printer, BBP®33 Sign & Label Printer, BBP®35 Multicolor Label Printer, BBP®37 Multicolor & Cut Label Printer, BradyPrinter i3300 Industrial Label Printer, BradyPrinter i5300 Industrial Label Printer, BradyPrinter S3000 Sign & Label Printer, BradyPrinter S3100 Sign & Label Printer
Ribbon Size4.33 in W x 200 ft L
Material Number R6000 Halogen Free (View Technical Data Sheet)
Resistance Properties Halogen Free, Heat-Resistant, Scratch-Resistant, Solvent-Resistant
Color Black
Overview
B30 Series "Drop & Click" print ribbons enable 5-second ribbon supply changes. No calibrating, no threading, no waste, no hassles and the ink always faces the right direction!
One-color ribbon for printing a single color onto a label
R6000 Series Halogen-Free Resin Formulation offers excellent solvent, scratch and heat resistance when printed on the appropriate label material
Recommended for printing on glossy or very smooth label stocks, such as B-483 Ultra Aggressive Polyester and B-423 Permanent Polyester from Brady®
Self-contained B30 Series cartridges drop straight into the printer with a "click"
$
94.48
Qty:
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
$
2.45
Qty:
$
0.74
Qty:
Qty:
Part #:810166
- Country of Origin MX:
$
38.23
Qty:
closeout
Part #:501470
- CLOSEOUTS Only 3 Left!
- Product Highlights
Circuit Breaker Lockout Type
Single-Pole
Color
Red
Dimensions
3.25 in H x 1.588 in W x 2.175 in D
Maximum Number of Padlocks
1
Risk Type
Electrical Risk
Overview
Clamp-on breaker lockouts are versatile and easy to install using the proprietary thumbwheel design - no screwdrivers needed!
Extremely versatile - works on a wide range of single-pole and internal-trip multi-pole breakers
Detachable cleat (included) expands the range of applicable breakers
Equipping your employees with the proper lockout tools and warning devices can save lives, reduce lost employee time, and cut insurance costs
Brady® is a world leader in lockout/tagout products and services offering industry expertise and a broad range of durable, easy-to-use lockout devices
$
9.12
Qty:
Part #:810251
- Country of Origin MX:
$
44.23
Qty:
Part #:810200
- Country of Origin MX:
$
40.85
Qty:
Part #:807287
- Country of Origin MX:
$
84.73
Qty:
Part #:806942
- Country of Origin MX:
$
219.69
Qty:
Part #:806956
- Country of Origin MX:
$
209.99
Qty:
Part #:806936
- Country of Origin MX:
$
455.30
Qty:
Part #:806955
- Country of Origin MX:
$
209.99
Qty:
$
304.50
Qty:
Displaying: 1 - 24 of 428 Matching Items