Armstrong International
Apollo


Displaying: 1 - 24 of 2,335 Matching Items
2,335 Items
View:
Part #:500566
#2 Twist Link Machine Chain, Zinc Plated, 100' per Carton Uses General Utility Applications Standard Material Low Carbon Steel Standard Finish Bright, Zinc Plated and Galvanized Design Factor 4 to 1 Packaged in Cartons, Order Unit is "Feet" Made in the USA Do Not Use for Overhead Lifting DO NOT EXCEED THE WORKING LOAD LIMIT
$5.95 MSRP $ 3.48
Qty:
add to cart
$1.49 MSRP $ 0.87
Qty:
add to cart
$27.20 MSRP $ 18.92
Qty:
add to cart
$3.85 MSRP $ 2.84
Qty:
add to cart
Part #:502912
3/16&rdquo Cold Shut, Steel, Zinc Plated Connections for Chain and Attachments When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size With A Hammer, Drive the Open End Through the Cold Shut Eye. Peen the Extended End to Prevent Opening Order Unit is "Each" Note Cold Shuts Should Not Be Reused After Closure Has Been Made DO NOT EXCEED THE WORKING LOAD LIMIT Do Not Use for Overhead Lifting or Hoisting
$2.09 MSRP $ 1.22
Qty:
add to cart
Part #:506572
$19.26 MSRP $ 14.13
Qty:
add to cart
$23.92 MSRP $ 16.74
Qty:
add to cart
$25.65 MSRP $ 18.09
Qty:
add to cart
Part #:506583
$26.35 MSRP $ 18.57
Qty:
add to cart
Part #:506591
$38.21 MSRP $ 26.92
Qty:
add to cart
$75.26 MSRP $ 52.68
Qty:
add to cart
Part #:506601
$92.72 MSRP $ 67.97
Qty:
add to cart
$28.12 MSRP $ 18.92
Qty:
add to cart
Part #:507505
5/16" Alloy Clevis Slip Hook, Forged Alloy, Painted Orange Material is Heat-Treated Alloy Steel Alloy Hooks Are Painted Orange and Stamped "AH" 1/4" to 3/8" Hooks Have Drilled Hole for Latch Kit Design Factor 3.5 to 1 Slip Hooks Are Designed to Allow Chain to Slip Through the Hook Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load DO NOT EXCEED THE WORKING LOAD LIMIT
$45.06 MSRP $ 26.45
Qty:
add to cart
Part #:508023
3/8" Grade 30 Proof Coil Chain, Zinc Plated, 63' per Round Pail Excellent Low Carbon Steel Chain for General Purpose Applications Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications Standard Finish Zinc Plated or Galvanized Hallmarking "C3" and "USA" on 5/16" and Larger Proof Tested Design Factor 4 to 1 Packaged in Pails, Order Unit is "Each" Made in the USA Do Not Use for Overhead Lifting DO NOT EXCEED THE WORKING LOAD LIMIT
$421.87 MSRP $ 282.64 PAIL
Qty:
add to cart
$5.83 MSRP $ 4.07
Qty:
add to cart
Part #:511841
3/16" Wire Rope Clip, Electro-Galvanized If Used on Coated Cable, Remove the Coating From the Assembly Area Follow Assembly Instructions
$1.95 MSRP $ 1.13
Qty:
add to cart
Part #:511866
1/2" Clevis Grab Hook, Forged Steel, Self Colored Forged Steel Grade 43 UPC Tagged Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load DO NOT EXCEED THE WORKING LOAD LIMIT
$30.03 MSRP $ 17.63
Qty:
add to cart
Part #:511892
5/16" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue Shackle Bodies Are Drop-Forged Carbon Steel Self Colored (Painted Blue) C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel
$13.62 MSRP $ 7.99
Qty:
add to cart
Part #:511893
3/8" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue Shackle Bodies Are Drop-Forged Carbon Steel Self Colored (Painted Blue) C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel DO NOT EXCEED THE WORKING LOAD LIMIT
$15.70 MSRP $ 9.21
Qty:
add to cart
Part #:511895
1/2" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue Shackle Bodies Are Drop-Forged Carbon Steel Self Colored (Painted Blue) C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel DO NOT EXCEED THE WORKING LOAD LIMIT
$20.73 MSRP $ 12.17
Qty:
add to cart
Part #:511896
5/8" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue Shackle Bodies Are Drop-Forged Carbon Steel Self Colored (Painted Blue) C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel DO NOT EXCEED THE WORKING LOAD LIMIT
$35.73 MSRP $ 20.98
Qty:
add to cart
Part #:511897
3/4" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue Shackle Bodies Are Drop-Forged Carbon Steel Self Colored (Painted Blue) C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel DO NOT EXCEED THE WORKING LOAD LIMIT
$53.51 MSRP $ 31.42
Qty:
add to cart
Part #:511901
1" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue Shackle Bodies Are Drop-Forged Carbon Steel Self Colored (Painted Blue) C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2 Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4 Certification Available Upon Request 6 to 1 Design Factor Pins and Bolts Are Heat-Treated and Made of Alloy Steel DO NOT EXCEED THE WORKING LOAD LIMIT
$92.61 MSRP $ 54.38
Qty:
add to cart
 
Displaying: 1 - 24 of 2,335 Matching Items