Lithonia
Armstrong
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:302936
- The Quantum LHQM LED is the perfect choice with space at a premium. The combination of exit and emergency lighting also has self-diagnostic option available.
Suitable for applications requiring quick installation of both exit sign and unit equipment with a streamlined design for above-the-door applications and other tight fits.
The LHQM LED delivers 25' center-to-center spacing to meet the NFPA 101 Life Safety Code with fewer fixtures.
Impact- and scratch-resistant thermoplastic housing
Universal mounting top, end and back
Ni-cad battery
HO battery options allow use with up to six LED remote lamp heads
$
116.10
Qty:
$
110.67
Qty:
$
48.45
Qty:
Part #:713360
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713363
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:507402
- Technical Specs
Item Rust Treatment Color Opaque Container Size 1 qt Dry Time 20 min Application Method Brush Or Commercial Sprayer
Qty:
Part #:512443
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 20 sec Viscosity - Adhesives 45 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 495 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.1 @ 23.89 Degrees C Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General Purpose Tensile Strength 2750 psi Standards 29 CFR 1910.1200 Application Bonds Rubber, Metal and Plastic Parts with Gaps up to 0.004 in
$
5.70
Qty:
Part #:511836
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Low Threadlocker Color Purple Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Dimethacrylate Ester For Fastener Dia. Up to 1/4 in Begins to Harden 20 min Series 222MS Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application For Locking All Fasteners 1/4 in or Smaller. Removable With Hand Tools Standards ASTM D5363, MIL-S-46163A Type II Grade M, NSF P1 Certified, RoHS Certified
$
20.50
Qty:
Part #:509131
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
20.50
Qty:
Part #:509662
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Low Color White Full Cure 24 hr Begins to Harden Primed 1-3 hr, Unprimed 6-24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 212 Degrees F Specific Gravity 1.25 Viscosity 17,000/50,000 Thixotropic For Use With Use on Coarse Metal Threads Application Lock and Seal Metal Pipes and Fittings to Prevent Loosening and Leakage from Shock and Vibration
$
32.84
Qty:
Part #:509132
- Technical Specs Item Pipe Thread Sealant Size 10 mL Container Type Bottle Chemical Type Methacrylate Ester Color Purple Gas Pressure Range 10,000 psi Begins to Harden Not Specified Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.02 @ 25 Degrees C Viscosity 14,000cP For Use With 7649, Primer 7088, or 7471 Application Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System, Suitable for Fittings Up to 50mm in Diameter Includes Pneumatic and Hydraulic Fittings
$
18.85
Qty:
Part #:509624
- Technical Specs Item Instant Adhesive Materials Bonded Plastic, Rubber Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 20 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 406 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics Bonds Quickly Tensile Strength 3200 psi Standards 29 CFR 1910.1200, Commercial Item Standard A-Aa-3097 Application Bonds Plastics and Elastomeric Materials
Qty:
Part #:509290
- Technical Specs
Anti-Seize Type General Purpose Anti-Seize Anti-Seize Brand Loctite Series LB 8065 Net Fill 0.705 oz Container Size 0.7054 oz Anti-Seize Container Stick Anti-Seize Base Copper Primary Additive Graphite Metal Free No Water Resistant No Conductive Yes Maximum Pressure Not Rated Anti-Seize Color Copper Odorless No Min. Operating Temp. -20 Degrees F Max. Operating Temp. 1,800 Degrees F NSF Rating Not Rated 50 State VOC Compliant No VOC Content 0 % Standards CFIA Listed Military Standard MIL-PRF-907F USDA Certified Biobased Product No
$
10.87
Qty:
Part #:509276
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Solid Threadlocker Container Stick Size 0.67 oz Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 248 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Product is a solid Specific Gravity 1.1 Viscosity Semisolid Removable With Hand Tools Application For Fasteners Between 1/4 and 3/4 in Dia Convenient Stick Package Standards OSHA Hazard Communication
Qty:
Part #:509285
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Solid Threadlocker Container Stick Size 0.67 oz Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 5 min Series 268 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Product is a solid Specific Gravity 1.1 Viscosity Semisolid Removable With Heat and Hand Tools Application For Fasteners Up to 3/4 in Dia Convenient Stick Package Standards OSHA Hazard Communication
Qty:
Part #:524020
- Technical Specs
Anti-Seize Type General Purpose Anti-Seize Anti-Seize Brand Loctite Series LB 8008 Net Fill 128 oz Container Size 8 lb Anti-Seize Container Can Anti-Seize Base Copper Primary Additive Graphite Metal Free No For Use On Materials Aluminum, Stainless Steel Conductive Yes Maximum Pressure Not Rated Anti-Seize Color Copper Odorless No Min. Operating Temp. -20 Degrees F Max. Operating Temp. 1,800 Degrees F NSF Rating Not Rated 50 State VOC Compliant No VOC Content 3 % Flammability Non-Flammable Flash Point 199 Degrees F Standards CFIA Listed Military Standard MIL-PRF-907F USDA Certified Biobased Product No
Qty:
Part #:516690
- Technical Specs Item Insulating and Sealing Tape Material Silicone Width 1 in Length 120 in Thickness .50 mm Color Red Performance Temp. Range -65 Degrees to 500 Degrees F Application Automotive, Corrosion, Ideal for Industrial, Marine, Plumbing, Seals and Protects Against Air and Water Leakage, Such As Electrical Insulation, and Electrical Uses, and Scratches
Qty:
Displaying: 25 - 48 of 2,115 Matching Items