Avery Products Corp
Armstrong International
View:
Active Filters :
$
57.70
Qty:
$
0.91
Qty:
$
2.24
Qty:
$
1.31
Qty:
$
1.88
Qty:
$
0.52
Qty:
$
1.56
Qty:
Part #:507707
- Area of ApplicationArcal Weld-O is a ready-to-use X-Ray quality welding prep for aluminum and all grades of aluminum alloys. Weld-O is an innovative chemical formulation that consists of a blend of mineral acids, surface active and sequestering agents and degreasers.
Weld-O deoxidizes the surface instantly and conditions the surface for X-ray quality welding. The weld joint is cleaner and stronger. By using Weld-O, the need for wire brushing and other time consuming cleanup procedures are eliminated. A simple water rinse may be done but in many cases is not required.
Qty:
Part #:601461
- Features&bull Excellent water removal efficiency&bull Unique deflector plate that creates swirling of theair stream ensuring maximum water anddirt separation&bull Easily disassembled for servicing without the useof tools&bull Interchangeable twist and automatic pulse drains&bull High flow 22 SCFM
Qty:
Part #:605160
- Parker Global Air Prep System Compact Air Pressure Regulators - P32R Series #P32RB92BNNP
Technical Specifications
Port Size 1/4"
Pressure Gauge No
Port Type NPT
Gauge Port Size 1/4 inch, 1/4"
Port Size 1/4 inch, 1/4"
Flow Rate 100 - 249 / Medium SCFM, 45 - 124 / Medium dm3/sec, 148 SCFM, 70 dm3/sec
Product Type Compact Regulator, Pneumatic Regulator - Manual Adjustable
Pressure Control Range 0 to 125 psig, 0 to 8 bar, 0 - 30 psig, 0 - 2 bar
Maximum Inlet Pressure Rating 0 to 300 psig, 0 to 20 bar
Pressure Regulator Type Relieving
Port Type NPT, BSPP
Operating Temperature -13° to +150° °F, -25° to +65.5° °C
Body Material Aluminum
Seal Material Nitrile
Weight 0.41 kg, 0.9 lb
Qty:
Part #:601967
- Prep-Air II FRL Filters (Particulate/Coalescing)
Prep-Air II Particulate/Coalescing Filters are designed to remove water, oil aerosols and particulate matter from your pneumatic system. These filters are generally used in industrial applications where water, oil, and harmful dirt must be removed.
Qty:
Part #:600466
- PARKER - WATTS C628 Series Combo FRL Units with a 0-125 psi Pressure Range, 250 psi Max Inlet, 85 SCFM Max Flow, 2 x 1/4" NPT Gauge Port
Manufacturer
PARKER - WATTS
Series
C628
Mfr Model #
C628-04FRL2ACA2B
Stock #
22756
Pipe Size
1/2" NPT
Reduced Pressure Range
0-125 psi
Max Inlet Pressure
250 psi
Max Flow
85 SCFM
Gauge Ports
2 x 1/4" NPT
Filter Element Material
Polyethylene
Filter Rating
40 micron
Bowl Material
Polycarbonate
Bowl Capacity (ounces)
4.4
Drain
Manual
Body Material
Zinc
Diaphragm - O-Ring Material
Buna-N
Adjustment Type
T-Handle
Panel Mount?
No
Relieving?
Yes
Gauge Included?
Yes
Options
Country of Origin
USA
Qty:
Part #:203957
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203944
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203945
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:130-4771-027
- 5700RING Shut-Off Rod - Centering Ring
$
23.02
Qty:
Part #:203890
- Straight Adaptors ONE END FEMALE NATIONAL PIPE THREAD -22 CTS x FNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203960
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203964
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204387
- Straight Adaptors ONE END MALE NATIONAL PIPE THREAD -33 PEP-7 x MNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204386
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204022
- Plug Style - AWWA Inlets AWWA x -22 CTS
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
132.48
Qty:
Displaying: 1 - 24 of 2,231 Matching Items