Avery
Armstrong International
View:
Active Filters :
Part #:501237
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501240
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501241
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501242
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501243
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501244
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501246
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:501247
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
Part #:506451
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
$
43.81
Qty:
Part #:507184
- 2x2 Slot Size 5/8in, 3x3 Slot Size 7/8in
$
81.11
Qty:
$
16.67
Qty:
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
$
19.32
Qty:
Part #:500557
- The Original&trade Straight Jaw Locking Pliers Features
Straight jaws provide maximum contact on flat, square, or hex work
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Hardened teeth are designed to grip from any angle
Qty:
Part #:500556
- The Original&trade Straight Jaw Locking Pliers Features
Straight jaws provide maximum contact on flat, square, or hex work
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Hardened teeth are designed to grip from any angle
Qty:
Part #:500563
- The Original&trade Curved Jaw Locking Pliers with Wire Cutter Features
Curved jaw with built-in wire cutter great for a variety of applications and material shapes.
Classic trigger release provides maximum locking force.
Convenient wire cutter included
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
Qty:
Part #:510750
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Convenient wire cutter cuts up to a 1/4" boltLong, straight nose allows for use in narrow spaces not reachable by curved or straight jawsUse to clamp or tighten bolts or to extract items in hard-to-reach places
Qty:
Part #:500407
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Qty:
Displaying: 1 - 24 of 2,257 Matching Items