Best Welds
Armstrong International
View:
Active Filters :
Part #:305131
- Advanced protection 600Vac, 1/4-30A, time-delay fuses Class CC current-limiting, time-delay fuses.
$
47.63
Qty:
Part #:504811
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:504832
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:504842
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:510855
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Qty:
Part #:804353
- Best Welds SoapstonesProduct DetailsAll white texture for excellent marking qualityGrain cut to ensure good strength and long service lifeMarks will not contaminate welds and are easily removedLow water content for increased hardness and resistance to breakage
Part #:800692
- Alumina Nozzle TIG Cup, 7/16", Size 7, For Torch 17, 18, 26, Gas Lens
Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
1.84
Qty:
Part #:800693
- Alumina Nozzle TIG Cup, 3/8", Size 6, For Torch 17, 18, 26, Gas Lens
Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
2.45
Qty:
Part #:511684
- 1/2" Drive Crowfoot Wrench Set, Open End, SAE, 12 Pieces
10840 12 Piece 1/2" Drive Crowfoot Wrenches on Clip RailsContents IncludeProduct Code Size (Inches) 10810 15&frasl16 10811 1 10812 1 1&frasl16 10813 1 1&frasl8
10814 1 3&frasl16
10815 1 1&frasl4
10816 1 5&frasl16
10817 1 3&frasl8
10818 1 7&frasl16
10819 1 1&frasl2
10820 1 9&frasl16
10821 1 5&frasl8
Qty:
Part #:504351
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
$
19.69
Qty:
Part #:800691
- Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
1.84
PACK
Qty:
Part #:501692
- Multi Packs
Assembled from our most popular sets
Multiple sets per package
Tip selections include Ball End, Hex End, TORX®, ProHold® Tip Ball End, and MaxTorque&trade Ball End
ProGuard&trade ProHold® Tip Ball End
Qty:
Part #:511497
- Multi Packs
Assembled from our most popular sets
Multiple sets per package
Tip selections include Ball End, Hex End, TORX®, ProHold® Tip Ball End, and MaxTorque&trade Ball End
$
41.87
Qty:
Part #:841-900-225M-25-R
- 225 Amp Water Cooled TIG Torch, Flex Head, 25 ft Rubber Cable
Best Welds 225M Series Modular TIG TorchesProduct DetailsMaintains excellent dielectric propertiesTorch heads will not crack5 torch head options2 piece constructionIncludes1PC Rubber Power CableHandleWrenchWater & Gas Hoses
Qty:
Part #:841-900-45V26
- Best Welds Gas Lense Collet BodiesProduct DetailsGas lenses provide a more efficient stream of shielding gas to the welding processThe gas lens virtually eliminates turbulence in the gas shielding stream as it emerges from the nozzleTwo-piece construction
$
17.83
PACK
Qty:
Part #:841-900-3327GE3
- Best Welds Tungsten ElectrodesProduct DetailsLonger life than thoriated electrodesNon-radioactive additivesCan be used in both AC and DC processesExcellent arc starting and stability
Qty:
Part #:459-33034
- TORX® T-Handles - ProGuard&trade Finish
Fits all TORX® and Starscrews
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Qty:
Part #:841-902-2400-OR-40
- Best Welds Heavyweight Fiberglass Fabric, 50 yd x 40 in, Orange
Best Welds Heavyweight Fiberglass FabricProduct DetailsIndustry-strength, plain-weave fiberglass fabric with a light clear acrylic coating to minimize fraying and unraveling of cut edgesDesigned for use in areas where a fabric with high heat resistance is required
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:841-900-9-70M
- Best Welds TIG Torch HeadsProduct DetailsTorch head for TIG welding torchReliable quality
$
45.00
Qty:
Part #:841-900-9-90M
- Best Welds TIG Torch HeadsProduct DetailsTorch head for TIG welding torchReliable quality
$
46.35
Qty:
Displaying: 1 - 24 of 2,310 Matching Items