Bondhus
Armstrong International
View:
Active Filters :
Part #:459-10907
- Bondhus® Balldriver® L-Wrench KeysProduct DetailsBall end inserts into a screw at a 25° angle and allows natural hand and wrist movementSaves time by quickly funneling tool into screwSuperior ball end strength and working angleWorks in hard-to-reach places.
Qty:
Part #:500562
- The Original&trade Curved Jaw Locking Pliers with Wire Cutter Features
Curved jaw with built-in wire cutter great for a variety of applications and material shapes.
Classic trigger release provides maximum locking force.
Convenient wire cutter included
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
Qty:
Part #:500561
- The Original&trade Curved Jaw Locking Pliers Features
Self-energizing lower jaw provides 3X more gripping power than traditional locking pliers, with no slipping or stripping.
Provides maximum torque without requiring heavy input pressure &ndash jaw mechanism naturally grips tighter as more torque is applied to the tool.
Classic trigger release provides maximum locking force.
Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque.
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
vs. traditional locking pliers
Qty:
Part #:500560
- The Original&trade Curved Jaw Locking Pliers Features
Self-energizing lower jaw provides 3X more gripping power than traditional locking pliers, with no slipping or stripping.
Provides maximum torque without requiring heavy input pressure &ndash jaw mechanism naturally grips tighter as more torque is applied to the tool.
Classic trigger release provides maximum locking force.
Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque.
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
vs. traditional locking pliers
Qty:
Part #:502914
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Qty:
Part #:501811
- New Fast Release&trade Locking Clamp With Swivel Pads Features
20% Reduced Hand Span¹ improves user control and helps reduce hand strain
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work and delicate materials while reducing damage to the work surface
Redesigned tactile grip zone helps improve user control and is suited for high-temperature applications
Hex key adjusting screw tightens to adjust pressure and draws materials together, providing a more controlled release
Made with a one-handed, triggerless release that is 2X easier to open²
Built with heat treated alloyed steel for maximum durability
Backed by IRWIN Lifetime Guarantee
¹ Compared to previous VISE-GRIP® FAST RELEASE&trade design. Reduced hand span applies to 10&rdquo and 11&rdquo models only.
Qty:
Part #:500564
- The Original&trade Locking Chain Clamp Features
Chain holds and locks around any shape or size
Ideal for awkward shape pieces
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Qty:
$
1.99
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:502627
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
$
12.30
Qty:
Part #:507131
- Ball End L-Wrenches - BriteGuard&tradeFinish
Ball End inserts into screw at a 25° angle
Ball End saves time by quickly funneling tool into screw
25° angle allows natural hand and wrist movement
Superior Ball End strength and working angle
Works in hard to reach places
Qty:
Part #:459-15389
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:459-15390
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:841-585-80187
- 13pc Tap (HCS) & Drill Bit Sets (HSS) Features
These drill and tap combinations produce a thread that is strong and easy to tap
135° split point HSS drill bits ensure fast, precise drilling
High carbon steel plug taps are ideal for general purpose threading
Qty:
Part #:504353
- Stubby Ball End L-Wrenches - ProGuard&tradeFinish
Fits into tight spaces standard hex keys can not
Eliminates the need to trim and file the short arm
Tighter inside radius means full smooth entry into screw head
Chamfered short arm eliminates burrs
Ball End inserts into a screw at a 25° angle
$
32.64
Qty:
Part #:459-16737
- Stubby Ball End L-Wrenches - BriteGuard&tradeFinish
Fits into tight spaces standard hex keys can not
Eliminates the need to trim and file the short arm
Tighter inside radius means full smooth entry into screw head
Chamfered short arm eliminates burrs
Ball End inserts into a screw at a 25° angle
Qty:
Part #:521100
- Specification
CATALOG NUMBER
01314
DESCRIPTION
SDS SHANK 1/4" X 6"
SHANK DIAMETER
1/4"
OVERALL LENGTH
6"
USEABLE LENGTH
4"
Qty:
Part #:510400
- Specification
CATALOG NUMBER
01372
DESCRIPTION
HD STRAIGHT SHANK 1/4" X 6"
SHANK DIAMETER
1/4"
OVERALL LENGTH
6"
USEABLE LENGTH
4"
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:459-34532
- TORX® Tip Screwdrivers - ProGuard&tradeFinish
Fits all TORX® and Starscrews
Burr free tool tips help tools seat fully in screw head
Precision machined tips transfer more torque to the screw and reduces stripping
Broad contact surface provides deep lobe engagement
Straight, vertical sidewalls increase tool engagement and virtually eliminates camout
Qty:
Part #:511333
- Hex End L-Wrenches - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screw head
Sharp corners transfer more torque to the screw and reduce stripping
Precision machined for ease of use and superior fit
Qty:
Part #:804481
- Hex End GorillaGrip® Fold Ups - ProGuard&trade Finish
Chamfered tool tips eliminate burrs and help tools seat in screws
World's strongest handle
Speed-Wrench feature
Tools open from both the top and bottom
Molded-in 90° stop
Patented spacers between tools
Qty:
Displaying: 49 - 72 of 2,206 Matching Items