Bussmann Division
Armstrong International
View:
Active Filters :
Part #:511082
- Premier red Stick-on Paper Ro lls Better Tier / Aluminum Oixde Dri-Lube Resin Paper Open
Best choice for paints, primers, plastics, fiberglass, wood and sealer sanding
2-3/4" x 25 Yards Grading P80 B 0912 DO
Qty:
Part #:501000
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
Qty:
Part #:507591
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin ClothIdeal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
Qty:
closeout
$48.61 MSRP
$
36.15
Part #:503322
- CLOSEOUTS Only 1 Left!
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
1-1/2" x 50 Yards &ndash Economy Rolls
Grading P240 JCF 0852
Qty:
Part #:507585
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin ClothIdeal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
Qty:
Part #:509713
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF0852
P400
Qty:
Part #:504500
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Qty:
Part #:300423
- Wall Mount Thermal Photocontrol, 120 V
Intermatic&rsquos wall mount thermal-type photocontrol installs into standard outdoor single-gang electrical boxes. The photocontrol provides dusk-to-dawn lighting control. Compatible with Fluorescent, HID, and Incandescent bulbs.
$
16.96
Qty:
Part #:309735
- NightFox&trade Stem and Swivel Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
24.48
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:841-481-08834165001
- Merit Abrasives PowerLock Quick-Change KitProduct DetailsPerfect problem solver for deburring, polishing and grindingDependableIncludes 150 discs, assorted grits in 1", 2" and 3" diameters and 3" holdersIncludes150 discs, assorted grits in 1"", 2"" and 3"" diameters and 3"" holders
Qty:
Part #:841-481-08834196927
- Merit Abrasives Rubber Expanding Drums for Spiral BandsProduct DetailsSpiral construction avoids shadow marks and provides smooth, chatter-free cutting actionFast cutting and removes toughest metalBands are easily removed and replaced
Qty:
Part #:506962
- HD3 3 LB Hand Driller the right hammer for striking star drills, cold chisels, brick chisels and punches. Broad, polished striking faces with generous bevels. Rust-resistant powder coat finish on smooth ground sides. Select, hickory handle. MADE IN USA.
Qty:
Part #:300145
- Extra/replacement trippers 1 ON and 1 OFF
Indoor Lighting Control
Timing/Scheduling ON/OFF
$
3.67
Qty:
closeout
Part #:300503
- Availability: Will be backordered (Typically arrives in 14 days)
$
18.84
Qty:
closeout
Part #:301180
- CLOSEOUTS Only 6 Left!
- Fast-acting, low-breaking capacity fuse.
$
3.82
Qty:
closeout
$
11.19
Qty:
closeout
$
24.96
Qty:
closeout
$
62.27
Qty:
closeout
$5.93 MSRP
$
4.93
Qty:
closeout
$14.79 MSRP
$
12.31
Qty:
closeout
$19.41 MSRP
$
16.16
Qty:
Part #:302241
- Locking Type Receptacle, 3-Pin, C136.10 Compliant, with Pole Mounting Bracket
The K122 NEMA receptacles provide the connector interface for locking type photocontrols. They can be installed in the light fixture itself, or attached externally with the use of a mounting bracket (included).
$
28.66
Qty:
closeout
$10.28 MSRP
$
8.56
Qty:
Displaying: 49 - 72 of 2,239 Matching Items