Bussmann Division
Armstrong International
View:
Active Filters :
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:304701
- Weatherproof Cover for Flanged Inlet/Outlet
Unbreakable glass-filled polycarbonate construction to withstand years of job site abuse and harsh environmental exposure.
Stainless steel mounting screws also resist corrosion.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Molded-in label area (2.8 sq. in.) for pre-printed or handwritten labels for identification of circuits, ratings and other application data.
WPG1 and WPG2 have lockable bullnose for OSHA locktag/tagout compliance.
Covers fit all competitive inlets and outlets.
Pre-attached gaskets for easy installation and tight seal to panel or weatherproof box -- with no misaligned or collapsed gaskets.
Tamper-proof hinge features permanent, locked-in pins for added security.
cULus ListingNumber 143222
Qty:
Part #:303205
- WP BOX 1G 3 HOLE 1/2 WPB23
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:300310
- Single Gang Cast While-In-Use Cover, Gray
Compliant with National Electric Code (NEC) Section 406.8(B)(1) for wet locations.
UL listed for ''Extra-Duty'' applications.
Heavy cast aluminum construction.
Corner hinge allows for vertical or horizontal mounting.
Device inserts allow for multiple device types.
Install without removing electrical device thanks to keyed mounting holes.
Cord flap gaskets inhibit water splash and insects, all gaskets are factory installed.
Accepts padlocks.
Qty:
Part #:303395
- Thermoplastic Weatherproof Covers for Flanged Inlet/Outlet
Unbreakable glass-filled polycarbonate construction to withstand years of job site abuse and harsh environmental exposure.
Stainless steel mounting screws also resist corrosion.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Molded-in label area (2.8 sq. in.) for pre-printed or handwritten labels for identification of circuits, ratings and other application data.
WPG1 and WPG2 have lockable bullnose for OSHA locktag/tagout compliance.
Covers fit all competitive inlets and outlets.
Pre-attached gaskets for easy installation and tight seal to panel or weatherproof box -- with no misaligned or collapsed gaskets.
Tamper-proof hinge features permanent, locked-in pins for added security.
cULus ListingNumber 143222
Qty:
Part #:307371
- Weatherproof Single Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303230
- Weatherproof Two Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303227
- Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
Qty:
Part #:303216
- Cast Weatherproof Cover Single Pole Toggle Switch, Gray
Broad line of single gang covers for switches and GFCIs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Heavy-duty die-cast zinc.
Stainless steel springs.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Qty:
Part #:304264
- Industrial Extra Heavy Duty Specification Grade Lock Switch, Back and Side Wire, Gray
One-piece toggle molded from chemical-,impact-,and heat-resistant thermoplastic.
Impact- and chemical-resistant cover.
Glass-reinforced, chemical-resistant thermoplastic back body for durability, strength, and resistance to harsh cleaners.
One-piece nickel-plated brass strap for superior corrosion-resistance.
Auto-ground clip assures positive ground.
Cam control and spring actuator for positive ''makes and breaks.''
Heavy-duty bumpers for quiet, smooth operation.
Locking support provides resistance to face and back body separation.
Oversized silver-alloy contacts for long life and better heat dissipation.
Side and external screw-pressure-plate back wire with #14 - #10 AWG copper or copper-clad wire.
Heavy-duty, brass alloy, one-piece contact arm virtually eliminates contact bounce.
Grounding terminal is standard with screw-pressure plate back wire.
Shallow design for easier installation.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140597
Qty:
Part #:312824
- Industrial Extra Heavy Duty Specification Grade Lock Switch Back and Side Wire, Gray
External screw-pressure-plate back and side wired. Accepts #14 - #10 AWG copper or copper-clad conductors.
Heavy-gauge one-piece copper alloy contact arm virtually eliminates contact bounce.
Cam controls fast ''make'' and positive ''break'' to minimize arcing.
Heavy-duty bumper pads for quiet operation.
High strength thermoplastic polycarbonate toggle.
Back body made of glass-reinforced nylon.
Locking support provides resistance to face and back body separation.
Oversized silver alloy contacts for long life and better heat dissipation.
Grounding terminal is standard.
Shallow design for ease of installation.
Strap nickel-plated steel with integral ground.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140597
Qty:
Part #:303203
- Outdoor Lamp Cluster Cover for Single Gang Box, Gray
Wide range of rectangular and round covers.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Kits available combining fixtures, lamp covers, and accessories.
CSA File Number 17695
Qty:
Part #:306106
- Industrial Extra Heavy Duty Specification Grade Lock Switch, Back and Side Wire, Gray
External screw-pressure-plate back and side wired. Accepts #14 - #10 AWG copper or copper-clad conductors.
Heavy-gauge one-piece copper alloy contact arm virtually eliminates contact bounce.
Cam controls fast ''make'' and positive ''break'' to minimize arcing.
Heavy-duty bumper pads for quiet operation.
High strength thermoplastic polycarbonate toggle.
Back body made of glass-reinforced nylon.
Locking support provides resistance to face and back body separation.
Oversized silver alloy contacts for long life and better heat dissipation.
Grounding terminal is standard.
Shallow design for ease of installation.
Strap nickel-plated steel with integral ground.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Key can be removed in both positions
cULus ListingNumber 140597
Qty:
Part #:304282
- Industrial Extra Heavy Duty Specification Grade Lock Switch Back and Side, Gray
External screw-pressure-plate back and side wired. Accepts #14 - #10 AWG copper or copper-clad conductors.
Heavy-gauge one-piece copper alloy contact arm virtually eliminates contact bounce.
Cam controls fast ''make'' and positive ''break'' to minimize arcing.
Heavy-duty bumper pads for quiet operation.
High strength thermoplastic polycarbonate toggle.
Back body made of glass-reinforced nylon.
Locking support provides resistance to face and back body separation.
Oversized silver alloy contacts for long life and better heat dissipation.
Grounding terminal is standard.
Shallow design for ease of installation.
Strap nickel-plated steel with integral ground.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Qty:
Part #:303211
- Weatherproof Single Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:303217
- Weatherproof Single Gang Box, Gray
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:322404
- WP BOX 1G 5 HOLE 3/4 GY WPB36
Wide range of sizes, depths, and gangs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
2 closure plugs and mounting lugs furnished with all boxes.
UL Listed for wet and/or damp locations with appropriate cover.
Designed for both interior and exterior applications.
Will accept standard 4 screw mounting covers and single gang weatherproof covers.
Simply strike desired knockout studs with a sharp hammer blow for clean mounting holes.
Heavy die-cast aluminum.
For covering patents, see www.legrand.us/patents.
CSA File Number 17695
Qty:
Part #:300427
- Thermoplastic Cover, Gray
Broad line of single gang covers for switches, receptacles, GFCIs and power outlets.
Clear polycarbonate lid with reinforced thermoplastic base.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 17695
Qty:
Part #:302593
- One Gang Heavy Cast Aluminum Cover Decorator/GFCI Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:302594
- One Gang Heavy Cast Aluminum Cover Decorator/GFCI Vertical, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:300775
- 15A NEMA L515 Flanged Outlet, Gray
Interior components constructed of high-grade brass material for physical and electrical integrity.
High-impact thermoplastic housing withstands on-the-job abuse.
Ratings and NEMA configurations are clearly visible on flange face, for fast I.D. while in use.
CSA File Number 16063
Qty:
Part #:300297
- 20A NEMA L520 Outlet, Gray
Interior components constructed of high-grade brass material for physical and electrical integrity.
High-impact thermoplastic housing withstands on-the-job abuse.
Ratings and NEMA configurations are clearly visible on flange face, for fast I.D. while in use.
CSA File Number 16063
Qty:
Part #:303252
- Cast Weatherproof Two Gang Cover, Gray
Broad line of two gang covers for switches, receptacles, GFCIs, and power outlets.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Heavy-duty die-cast zinc.
Stainless steel springs.
All covers have 2 self-closing lids.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Qty:
Displaying: 1 - 24 of 27 Matching Items