Bussmann Division
Armstrong International
View:
Active Filters :
Part #:301702
- Stem Mount Thermal Photocontrol, 120 V
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
15.35
Qty:
Part #:305131
- Advanced protection 600Vac, 1/4-30A, time-delay fuses Class CC current-limiting, time-delay fuses.
$
47.63
Qty:
Part #:507472
- Carborundum Aluminum Oxide Resin Cloth Sheets, Aluminum Oxide Cloth, P240
Product DetailsSuperior conformability to complex surfaces and better finishes
Qty:
Part #:501754
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications.
BF 0416 W
Qty:
Part #:501742
- Silicon Carbide Paper Sheets Good Tier / Silicon Carbide Resin Waterproof Paper
May be used wet or dry on plastic or painted surfaces. Best results are obtained when used wet.Excellent for machine and hand rubbing of lacquer, urethane and varathane between coats. Ideal forobtaining fine finishes and feather-edging painted surfaces.
Qty:
closeout
Part #:507581
- CLOSEOUTS Only 1 Left!
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
$
28.32
Qty:
closeout
$7.74 MSRP
$
3.50
Part #:500702
- CLOSEOUTS Only 100 Left!
- Silicon Carbide Sandscreen SheetsGood Tier / Silicon Carbide Waterproof Resin Sandscreen
Features &bull Black, silicon carbide abrasive&bull P-graded in 220 and coarser grits &bull Full resin bond system &bull Screen backing &bull Both sides are usable
Benefits
&bull Very sharp and hard, but brittle
&bull Provides consistent finishes
&bull Maximum grain adhesion
&bull Load resistant
Qty:
Part #:500975
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
Part #:507583
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin ClothIdeal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
Qty:
Part #:505714
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
P320 JCF 0852
Qty:
Part #:507471
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507466
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507465
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:503817
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Grading P60
YP 0998 W
Qty:
Part #:504491
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Qty:
Part #:507452
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications
BF 0416 W
Qty:
Part #:505674
- Fibrate x Non-Woven Hand Pads Good Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very fine, aluminum oxide pads for general cleaning and finishing, removal of rust and oxidation from metals, and lightlysanding old paint or new primers. No color bleeding when working with solvents. 84700 is perforated to create two smaller4-1/2" x 6" pads.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very Fine A/O Gen. Purp. Maroon
Qty:
Part #:500847
- Green &ndash 05539579600 A very fine grit aluminum oxide pad for general clean-up as well as finishing stainless steel.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Fibratex products are a non-woven nylon web impregnated with abrasive grain and resin bond. They arenon-metallic, won't rust, and are ideal as replacements for steel wool and/or wire brushes.
Qty:
Part #:305991
- Locking Type Thermal Photocontrol, 120-277 V
These photocontrols install on light fixtures with ANSI C136.10 NEMA receptacles commonly found on street light fixtures. Locking type design facilitates fast installation and replacement of photocontrol.
$
24.41
Qty:
Part #:841-481-05539510797
- Carborundum Silicon Carbide Waterproof Paper SheetsProduct DetailsBest results are obtained when used wetExcellent for machine and hand rubbing of lacquer, urethane and varathane between coatsMay be used wet or dry on plastic or painted surfaces
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:307241
- NightFox&trade Stem Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
22.40
Qty:
Displaying: 1 - 24 of 2,188 Matching Items