Cantex
Armstrong International
View:
Active Filters :
Part #:307274
- Yellow 77® Plus, 1-Quart Squeeze Bottle
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:310921
- Pre-Insulated Crimp Connector, Model 49, Box of 1,000
Crimp connectors from IDEAL are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. IDEAL&rsquos Pre-Insulated Crimp Connectors have a compact design that fits easily into tight locations.
Connectors are translucent, allowing for confirmation of proper connection
Compact design fits easily into tight locations
Flared skirt protects against turned-back strands
Beveled opening eases wire entry
Tough UL 94V-2 flame-retardant shell rated at 105°C (221°F)
$
0.23
Qty:
Part #:310280
- Wire-Nut® Wire Connector, Model 71B® Gray, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:310281
- Wire-Nut® Wire Connector, Model 72B® Blue, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:310282
- Wire-Nut® Wire Connector, Model 73B® Orange, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:310283
- Wire-Nut® Wire Connector, Model 74B® Yellow, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:312426
- Wire-Nut® Wire Connector, Model 76B® Red, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:310286
- Steel Crimp Connector, Model 412 18-4 AWG, Box of 50
Crimp connectors from IDEAL are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. The steel and copper crimp connectors cover a wide range of combinations and have available insulating caps to protect against dangerous electrical shock.
Three models cover a wire range from 18 AWG to 4 AWG
Long-zinc plated steel sleeves maximize contact area with conductors
UL listed to 486C and CSA certified to C22.2 #188 comply with Federal Specification W-S-610E
IDEAL hand tools U.L. listed for Models 410, 411, 412 30-425, 30-429, 30-430
Qty:
Part #:310391
- Wing-Nut® Wire Connector, Model 451® Yellow, Box of 100
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
High-leverage, contoured wing design provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
Qty:
Part #:312424
- Wing-Nut® Wire Connector, Model 452® Red, Box of 100
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
Largest range in the Industry - from 2 #18 to up 4 #10
High-leverage, contoured wing provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
Qty:
Part #:312444
- Wing-Nut® Wire Connector, Model 454® Blue, Box of 25
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
High-leverage, contoured wing design provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
Qty:
Part #:310704
- 100' S-Class® Fiberglass Fish Tape w/Metal Eyelet & Rapid-Pak® Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
Qty:
Part #:310386
- T®-5 T®-Stripper Wire Stripper
Invented and manufactured at our Sycamore Illinois facility, the T®-Stripper Wire stripper line is the leading brand name in the world for strippers. The industry standard for over50 years. Compact, lightweight and easy to use. Features precision-ground, knife-type blades, built-in looping holes, wire cutters and a convenient plier nose.
Form-ground, knife-type blades for accurate, easy stripping without nicking conductor
Laser-etched wire gauge for easy-to-read visibility
Spring-loaded automatic opening
Corrosion-resistant, black oxide finish
Tough steel construction
Strips 10-18 AWG solid, 12-20 AWG stranded
$
16.25
Qty:
closeout
$25.02 MSRP
$
18.77
Part #:512636
- CLOSEOUTS Only 31 Left!
-
PURELL® Advanced Hand Sanitizer Gel
1000 mL Refill for PURELL® NXT® Dispenser
Refreshing gel.
Kills more than 99.99% of most common germs that may cause illness
Outperforms other hand sanitizers ounce-for-ounce¹
Clinically-proven to maintain skin health²
America&rsquos #1 Instant Hand Sanitizer³
Removable pump for easier recycling
SANITARY SEALED&trade refill helps prevent contamination
Qty:
Part #:1387-DS56-1515
- Unshielded Rubber Coupling 15" Cast Iron/Plastic x 15" Cast Iron/Plastic
$
54.00
Qty:
Part #:207133
- 1412014:
$
40.35
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:301272
- CANTEX 6141625 is a 1 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.21
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:301356
- CANTEX 6141632 is a 4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
2.20
Qty:
Part #:301402
- CANTEX 5140112 is a 4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
3.02
Qty:
Displaying: 25 - 48 of 2,238 Matching Items