Cantex
Armstrong International
View:
Active Filters :
Part #:301615
- Key features
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. CSA listed
One year warranty
$
53.33
Qty:
Part #:304993
- Key features
AC220 SureGrip&trade Alligator Clip Set
TP1 Slim-Reach&trade Test Probes (flat bladed)
TL224 SureGrip&trade Silicone Test Lead Set (straight to right)
One year warranty
$
121.58
Qty:
Part #:306993
- Key features
&ldquoThis meter is perfect for my use as I do HVAC and Electrical work and this will give me what I need for troubleshooting and performance of equipment.&rdquo - Paul
Automatically measure AC and DC voltage up to 600 V with precise digital resolution
Measure current up to 100 A without breaking the circuit with OpenJaw&trade design
Troubleshoot resistance problems up to 1000 &Omega
Work in tight spaces with detachable Slim Reach probe tips
$
196.02
Qty:
Part #:307265
- Key features
Digital multimeter designed specifically for HVAC professionals
Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
Provides microamps to test flame sensors
Features low input impedance to helps prevent false readings due to ghost voltage
Presents a large white LED backlight for working in poorly lit areas
Qty:
closeout
$
159.15
Qty:
Part #:310204
- Key features
Ultimate troubleshooting tool for electricians and instrumentation professionals
Combines the functionality of a loop calibrator with the power of a precision 1000 V, 440 mA True-RMS digital multimeter
Optional IR3000FC module for wireless data logging capabilities via Fluke Connect® mobile App
Includes 24 V loop power supply
Features a very large dual display with enhanced two-level backlight brightness settings
Qty:
Part #:303473
- Key features
Durable ribbon sensor
Measurement range -127 to 600 °C
One year warranty
$
374.61
Qty:
Part #:500594
- 1-1/8" Step Bit (#9)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2" drill chucks
Laser markings for quick, easy product and size identification.
Replaced 30008
Also available for sale in a carton, qty. 25 (Cat # GSB09-B UPC # 783310082071)
Qty:
Part #:500536
- 1/2" Step Bit (#1)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34401
Also available for sale in a carton, qty. 25 (Cat # GSB01-B UPC # 783310082057)
Qty:
Part #:500574
- 7/8" Step Bit (#4)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34403
Also available for sale in a carton, qty. 25 (Cat # GSB04-B UPC # 783310082040)
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
Qty:
Part #:506147
- Hand-Held Cable Cutter
Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²)
Precision-ground, shear-action, curved cutting blades
727 has PVC-covered, high-leverage handles for easier cuts
Heat-treated for long life
Made of heavy-duty forged steel
Rust-resistant black oxide finish
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:300994
-
Previous
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
Next
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
$
69.15
Qty:
Part #:300995
- Key features
SureGrip&trade AC285 has rubber overmolded surfaces for a firm reliable grip
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm (0.75 in) nut
Strong, nickel-plated steel jaws for a tight hold
Conforms to safety standard IEC61010-0312002 +A12008, CAT III 1000 V, CAT IV 600 V
10 A maximum, pollution degree 2, 2000 m altitude
Operating temperature -20 °C to 55 °C (-4 °F to 131 °F), 95% RH
One-year warranty
Qty:
Part #:300997
- Key features
Single probe pierces 0.25 to 1.5 mm insulated wire
Small pin allows self-healing of the insulation
1000 V, 10 A maximum
One year warranty
Qty:
Part #:301012
- Key features
Zippered polyester carrying case with padding and inside pocket.
Dimensions 218 x 128 x 64 mm (8.6 x 5 x 2.52 in)
Recommended for 11x series, 87v, 32x series, and most mid-sized DMMs
&ldquo...ample room for the quick reference card, the meter, and the leads (...) the material quality and construction should take abuse while protecting your expensive meter&rdquo- Jabit, verified customer
$
58.08
Qty:
Part #:301084
- Key features
Zippered carrying case with inside pocket belt loop and inside meter strap
One year warranty
Qty:
Displaying: 1 - 24 of 2,257 Matching Items