Armstrong International
Dixon Valve & Coupling Company
View:
Active Filters :
- Brand: Dixon Valve & Coupling Company Armstrong International J.H. Williams Osborne
- Alt. Size: 3/4"
Part #:334-SL075M
- Surelock&trade Male NPT End Attributes
Weight
0.52 lb
Size
3/4"
Material
Iron
Style
Small Head
Seal
Natural Rubber
Working Pressure
200 PSIG at 70°F (21°C)
$
7.31
Qty:
Part #:505934
- Boss® Ground Joint Stem Attributes
Weight
0.455 lb
Size
3/4" (20 mm)
Material
Plated Steel
$
12.85
Qty:
Part #:512583
- Air King® Clamp Attributes
Weight
0.54 lb
Size
3/4"
Material
Global investment cast carbon steel
Torque
21 ft. lbs.
Hose OD To
1-20/64" (33.3 mm)
Hose OD From
1-8/64" (28.6 mm)
$
7.39
Qty:
Part #:812455
- Jump Size King Combination Nipple NPT Threaded Attributes
Weight
0.26 lb
Size
3/4" (20 mm)
Material
Plated Steel
$
6.54
Qty:
Part #:506832
- Contractors EPDM Water Hose Attributes
Weight
16.35 lb
Size
3/4" x 50"
Material
EPDM
Color
Black
Working Pressure
150 PSI
Temperature Range
-20°F to 180°F (-29°C to 82°C)
$
154.63
Qty:
Part #:804344
- Air King® 2-Lug Female NPT End Attributes
Weight
0.6 lb
Size
3/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.10
Qty:
Part #:503704
- 3/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:804350
- Air King® 2-Lug Hose End Attributes
Weight
0.6 lb
Size
3/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
6.50
Qty:
Part #:804342
- Air King® 2-Lug Male NPT End Attributes
Weight
0.6 lb
Size
3/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.10
Qty:
Part #:103710
- Male NPTF x Hose Barb Attributes
Weight
0.18 lb
Material
Brass
Male Thread
NPTF
Length
2.19"
Hose ID
3/4"
Hex
1-1/16"
Male Thread Size
3/4"
$
4.48
Qty:
Part #:808647
- Boss® Ground Joint Complete Female Attributes
$
34.40
Qty:
Part #:334-1720
- Pinch-On Double Ear Clamp Attributes
Weight
0.0137 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
3/4"
Range
.638" to .787" (16.2 mm to 20.0 mm)
$
0.75
Qty:
Part #:804312
- Boss® Ground Joint Female Spud Attributes
Weight
0.71 lb
Material
Plated Steel
Thread
NPT
Seat
Polymer
Thread Size
3/4" (20 mm)
$
11.30
Qty:
Part #:506357
- Steel 3500 Male Nipple Attributes
Weight
0.45 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
3/4"
Male Thread Size
3/4"
Pressure Rating
600 PSI at 70°F (21°C)
$
10.05
Qty:
Part #:501927
- Polypropylene Cam & Groove Type F Adapter x Male NPT Attributes
Maximum Operating Pressure
125 PSI
Weight
0.06 lb
Size
3/4"
Material
Polypropylene
$
1.21
Qty:
Part #:334-PPA75
- Polypropylene Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
125 PSI
Weight
0.045 lb
Size
3/4"
Material
Polypropylene
$
1.63
Qty:
Part #:334-PPD75
- Polypropylene Cam & Groove Type D Coupler x Female NPT
Maximum Operating Pressure
125 PSI
Weight
0.17 lb
Size
3/4"
Material
Polypropylene
Seal
EPDM
$
5.39
Qty:
Part #:503692
- 3/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:702511
- Barbed Hose Mender Attributes
Weight
0.128 lb
Material
Brass
Length
2.50"
Hose ID
3/4"
$
3.54
Qty:
Part #:201543
- Clear PVC Braided Tubing Attributes
Tube OD
1.024"
Weight
61.35 lb
Material
PVC
Tube ID
3/4"
Color
Clear
Working Pressure
150 PSI
Temperature Range
27°F to 150°F (-2.8°C to 66°C)
Length
300'
$
2.22
Qty:
Part #:507842
- 1/2" Drive SAE 3/4" Impact Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:507863
- 3/4" Drive SAE 3/4" Impact Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:501440
- 7" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:501965
- 14" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Displaying: 1 - 24 of 562 Matching Items