General Tool
Armstrong International
View:
Active Filters :
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:800042
- Easily stretch over large work boots
Workbrutes® G2 are wider and have more room in the toe for the ideal fit over safety toe work boots and other large shoes, while high-quality PVC provides ultimate protection from liquids, mud and harsh chemical environments.
Product Details
17-inch height overshoe
Seamless injection-molding for 100% liquidproof protection
Expansion pleats for easy donning even over work boots
Thumb pocket at the top allows a non-slip grip for easy on
Frigiflex® PVC compound stays stretchy & flexible in cold temps
Increased thickness in the heel, toe & cleats for longer life
No lining for easy cleaning, laundering and decontamination
Molded-in buttons and holes for ideal fit and protection
High-stretch upper with durable, abrasion resistant outsole
Heavy-duty heel kick for hands-free removal
Part #:800593
- Our Premier G2® boot is tough, yet extremely comfortable. The Premier's unique blend of high molecular weight PVC resins and specialty additives offers superior chemical resistance to concentrates of fats, certain acids, alkalies, hydrocarbons, and other chemicals. That's why it is an excellent choice for food processing and petrochemical applications.
Ideal Applications Suited for various jobs within Food Processing (particularly red meat, turkey, dairy, and beverage), Chemical, and Petroleum Industries. Chemical Resistance Fats, oils, certain acids, alkalies, petroleum hydrocarbons, and other chemicals. Composite safety toe meets or exceeds ASTM F2413 M/I/C EH, and does not transfer cold or set off metal detectors. Calf Relief Expansion (CRE)&trade expands up to 1.5 inches for more calf comfort. Injection molded seamless construction is 100% liquid proof. Soft and flexible upper for all day working comfort. 15&rdquo Ht. with a cutline at 12&rdquo to facilitate fast and clean height modification. Outsole material is soft for excellent slip resistance and walking comfort while offering good abrasion and chemical resistance. Chevron-Plus® outsole provides excellent slip resistance on wet-contaminated and wet-clean surfaces and has more cleat material for longer service life. Beveled heel for reduced back and leg strain. Tread wear indicators to show when half the tread has worn away. Extra thick, removable contour cushion insoles absorb moisture and shock and provide outstanding comfort. Achieved apassing resultfor ASTM F1671 testing.
Electrical Hazard soles and heels are intended to reduce the hazards due to accidental contact with live electrical circuits, electrically energized conductors, parts or apparatus. Electric Hazard soles and heels are not intended for wear in those work environments where volatile chemicals or explosives may be present, where conductive footwear is required.
Warning Electric Hazard features of the soles and heels will deteriorate in wet environments, and when worn with excessive wear on the soles and heels.
Part #:800786
- Lightweight and affordable
Designed for 100% waterproof protection, our economy line of rainsuits is generously cut for ease of movement and comfort. With features such as electronically welded seams, easy access cargo pockets, vented cape back, snaps for adjustable fit, and heavy duty zipper, they are great for work or play. These imported suits are made to meet Tingley's high standard for quality. Ideal Applications General purpose, light duty. 2-piece suit includes hooded jacket and pants. .25mm double ply PVC. Lightweight and affordable. Zipper front jacket closure with outside storm flap to seal out wind and rain. Attached hood with drawcord. Snap fly front pants. All seams are electronically welded for 100% waterproof protection. Jacket has two easy access cargo pockets with flaps. Vented cape back and underarm vents circulate air for added comfort. Elastic waist pants with snap fly front. Take up snaps on sleeve and leg cuffs for adjustable fit.
Qty:
Part #:802117
-
All day comfort for tough jobs
The original Webdri PVC on polyester jacket is designed for comfort and toughness. Webdri is a truly comfortable, high performance jacket. Made with a heavy coating and a high loft lining, it can withstand extensive laundering and duty. That is why it is one of our most popular jackets. Ideal Applications Food Processing, Agriculture, Construction, Manufacturing, and Forestry. Chemical Resistance Many acids, oils, alcohols, salts and alkalies. Batwing sleeve construction and generously cut for maximum freedom of movement. Therm-O-Rad sealed seams for 100% waterproof protection. Storm fly front seals out wind, rain, and contaminants. Attached hood. Heavy duty snaps guaranteed not to fail. Mildew resistant. Stitch bonded non-woven lining defies punctures and tears as well as dissipates moisture. Specialty PVC coating resists fats and oils.
Qty:
Part #:808492
- Easily stretch over large work boots
Workbrutes® G2 are wider and have more room in the toe for the ideal fit over safety toe work boots and other large shoes, while high-quality PVC provides ultimate protection from liquids, mud and harsh chemical environments.
Product Details
17-inch height overshoe
Seamless injection-molding for 100% liquidproof protection
Expansion pleats for easy donning even over work boots
Thumb pocket at the top allows a non-slip grip for easy on
Frigiflex® PVC compound stays stretchy & flexible in cold temps
Increased thickness in the heel, toe & cleats for longer life
No lining for easy cleaning, laundering and decontamination
Molded-in buttons and holes for ideal fit and protection
High-stretch upper with durable, abrasion resistant outsole
Heavy-duty heel kick for hands-free removal
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:501131
- Round Brute Container, Plastic, 32 gal, Gray
RCP263200GY
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
$
64.65
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:509866
-
TE-YX FM Flat chisels Narrow-Flat Chisel TE-YP FM 28 #2241990
Connection endTE-Y (SDS Max)Length11 inWidth1 inProduct ClassUltimate
$
69.89
Qty:
Part #:505194
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
1.39
Qty:
Part #:500704
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
6.71
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
$
30.87
Qty:
$
30.87
Qty:
$
30.87
Qty:
$
30.65
Qty:
$
30.65
Qty:
$
33.90
Qty:
Part #:500250
-
TE 2 Rotary hammer Rotary hammer perf pkg TE 2 #3497789
Compact dual-mode, pistol-grip SDS Plus (TE-C) rotary hammer &ndash for hammer drilling and rotary-only drilling
Weight according EPTA-Procedure 01/20036 lb.
Working modeHammer drilling, Drilling
Hammer drilling diameter range5/32 - 7/8 in
Kit Contains
TE 2 120V Rotary Hammer
TE 2 Tool Case
Chuck Grease
Hammer Drill Bit TE-CX 3/8"x6"
Hammer Drill Bit TE-CX 1/4"x6"
Hammer Drill Bit TE-CX 3/16"x6"
Weight according EPTA-Procedure 01/20036 lb.Working modeHammer drilling, DrillingHammer drilling diameter range5/32 - 7/8 inOptimum Hammer drilling range5/32 - 15/32 inSingle impact energy1.3 ft-lbsHammer drilling RPM1200 rpmFull hammering frequency4600 impacts/minuteFunctionalityReverse mode, Depth gaugeTriaxial vibration value for hammer drilling into concrete (ah,HD)13.5 m/s² 1 A-weighted emission sound pressure level91 dB (A) 2 Dimensions (LxWxH)13.9 x 3.5 x 8 mm
$
397.70
Qty:
Part #:500394
- Description
Hygienic top for handsfree waste disposal. Drop-and-swing design provides easy access for refuse disposal and then quickly returns to hide refuse from public view. Crack-resistant plastic. Controls waste, odors and smoking debris.
Product Details
Global Product Type
Waste Receptacle Lids-Swing-Top Lids
Lid Type
Swing-Top Lid
Shape
Square
Color(s)
Gray
Material(s)
Plastic
Width
20.13"
Depth
20.13"
Height
6.25"
For Use With
Rubbermaid® Commercial 395800, 395900
Compliance Standards
ADA Compliant
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Country Of Origin
US
Carton Weight
23 lbs.
Carton Pack Quantity
4 EA
UPC
086876057621
UNSPSC
47121704
Shipping Weight & Item Dimensions
Weight
5.401 lbs.
Length
20.125 in
Height
6.25 in
Width
20.125 in
$
116.22
Qty:
Displaying: 25 - 48 of 2,232 Matching Items