General Tool
Armstrong International
View:
Active Filters :
Part #:310386
- T®-5 T®-Stripper Wire Stripper
Invented and manufactured at our Sycamore Illinois facility, the T®-Stripper Wire stripper line is the leading brand name in the world for strippers. The industry standard for over50 years. Compact, lightweight and easy to use. Features precision-ground, knife-type blades, built-in looping holes, wire cutters and a convenient plier nose.
Form-ground, knife-type blades for accurate, easy stripping without nicking conductor
Laser-etched wire gauge for easy-to-read visibility
Spring-loaded automatic opening
Corrosion-resistant, black oxide finish
Tough steel construction
Strips 10-18 AWG solid, 12-20 AWG stranded
$
16.25
Qty:
Part #:302936
- The Quantum LHQM LED is the perfect choice with space at a premium. The combination of exit and emergency lighting also has self-diagnostic option available.
Suitable for applications requiring quick installation of both exit sign and unit equipment with a streamlined design for above-the-door applications and other tight fits.
The LHQM LED delivers 25' center-to-center spacing to meet the NFPA 101 Life Safety Code with fewer fixtures.
Impact- and scratch-resistant thermoplastic housing
Universal mounting top, end and back
Ni-cad battery
HO battery options allow use with up to six LED remote lamp heads
$
116.10
Qty:
$
110.67
Qty:
Part #:310376
- Safe-T-Grip® Fuse Puller, Small
The Small Safe-T-Grip® Fuse Puller is fully insulated and is perfect for interchanging cartridge type fuses. It has a strong glass filled polypropylene construction that provides high di-electric strength. It is convenient to hold and features notched handles that offers more grip. Fuse puller is suitable for removing fuses of rating 250V. Puller is suitable for removing fuses of diameter ranging from 9/32" - 1/2".
Small Puller for 250V, 9/3" to 1/2" diameter fuses
5" overall length
Handy and convenient for removing or replacing cartridge-type fuses
Fully insulated, high dielectric, glass filled polypropylene construction
Notched handles provide safe, no-slip grip
Clearly marked amperage ranges
$
12.58
Qty:
Part #:713360
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713363
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:804543
- Tap Wrench for No. 0 to 1/4 In. Taps
The #164 Tap Wrench for No. 0 to 1/4 In. Taps is designed to hold and turntaps&mdashtools that cut threads on the inner surface of a hole or pipe&mdashor other small tools, such as hand reamers and screw extractors.
Length 2-7/8 in.
Qty:
Part #:506847
- Product Description
The #377 Welding Magnet with 50 Lb. Pull eliminates the need for clamps or temporary fasteners.
Features
Holds steel plates at any of five angles
Specifications
Magnetic pull force 50 lb.
Holding angles 30°, 45°, 60°, 75°, 90°
- See more at https//www.generaltools.com/welding-magnet-with-50-lb-pull#sthash.iQYGXUbb.dpuf
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:841-132-16-SS
- Ideal Reel Tie WiresProduct DetailsThese sturdy, versatile tie wires are efficient for indoor and outdoor jobsMade of stainless steel or black annealed finish, the tie wires are essential for fastening items togetherWires have a high level of strength and are capable of handling heavy items
$
74.66
Qty:
Part #:521100
- Specification
CATALOG NUMBER
01314
DESCRIPTION
SDS SHANK 1/4" X 6"
SHANK DIAMETER
1/4"
OVERALL LENGTH
6"
USEABLE LENGTH
4"
Qty:
Part #:510400
- Specification
CATALOG NUMBER
01372
DESCRIPTION
HD STRAIGHT SHANK 1/4" X 6"
SHANK DIAMETER
1/4"
OVERALL LENGTH
6"
USEABLE LENGTH
4"
Qty:
Part #:502753
- The #300/1 Industrial Precision 6 In. Flexible Steel Rule can make very precise measurements.
Features
Ultra-fine black graduations
Polished stainless steel finish
Pocket clip
Includes
Plastic sleeve
Dimensions
6 x 3-7/8 in.
Qty:
Part #:302517
- 9-1/2" Linesman Plier w/New England nose, crimping die & fish tape - Dipped Grip
The IDEAL® Made in the U.S.A. tool line uses forged-steel construction, which provides extra strength and hardness without sacrificing flexibility. Features knife-to-knife cutting blades, high leverage pivots, cam-action fish tape puller and dual crimp dies.
Custom alloyed, premium quality tool steel provides excellent cutting performance and commercial use durability
Precision ground knife-to-knifecuttingbladesfor accurate, quick wire cutting
Hardened and tempered body and cutting edges for optimum performance
High leverage pivot design provides great cutting and gripping power
Cuts hardened wire, bolts and stainless steel wire
$
43.96
Qty:
Part #:300217
- Sir Nickless&trade Armored Cable Cutter
The Sir Nickless&trade protects armored cable wires by drawing the wires down, creating airspace above the wires and providing room for the cutter blade to shear through and sever the armored casing without nicking the wires within. The Sir Nickless&trade is unique in that it has a curved design that allows the wires to draw down providing room for the cutting blade. The cable Cutter works well on all popular types of armored cable up to 3/8 inch diameter.
Handles all common BX, MCAP®, MC and Flex cables
Blade cuts armor without damage to internal conductors
Splices cleanly through casings with only a few turns
Handle knob stores up to six replacement blades
$
48.16
Qty:
Part #:302514
- Bender Handle, 1" x 44"
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:310377
- Safe-T-Grip® Fuse Puller, Medium
The Medium Safe-T-Grip® Fuse Puller is fully insulated and is perfect for interchanging cartridge type fuses. It has a strong glass filled polypropylene construction that provides high di-electric strength. It is convenient to hold and features notched handles that offers more grip. Fuse puller is suitable for removing fuses of rating 0 to 100A/250V & 600V. Puller is suitable for removing fuses of diameter ranging from 1/2" - 1".
Medium Puller for 0-100A/250V & 600V, 1/2" to 1" diameter fuses
7-1/2" overall length
Handy and convenient for removing or replacing cartridge-type fuses
Fully insulated, high dielectric, glass filled polypropylene construction
Notched handles provide safe, no-slip grip
Clearly marked amperage ranges
$
21.05
Qty:
Part #:310380
- Safe-T-Grip® Fuse Puller, Large
The Small Safe-T-Grip® Fuse Puller is fully insulated and is perfect for interchanging cartridge type fuses. It has a strong glass filled polypropylene construction that provides high di-electric strength. It is convenient to hold and features notched handles that offers more grip. Fuse puller is suitable for removing fuses of rating 31 to 600A/250V & 31 to 400A/600V. Puller is suitable for removing fuses of diameter ranging from 3/4" - 2-1/2".
Large Puller for 31 to 600A/250V & 31 to 400A/600V, 3/4" to 2-1/2" diameter fuses
11-3/4" overall length
Handy and convenient for removing or replacing cartridge-type fuses
Fully insulated, high dielectric, glass filled polypropylene construction
Notched handles provide safe, no-slip grip
Clearly marked amperage ranges
$
46.51
Qty:
Part #:310381
- Fuse Puller and Test Light
The Fuse Puller & Test Light comes in a convenient pocket-sized tool that provides maximum safety when pulling cartridge fuses and checking electrical connections. It checks voltage from 100 - 600 VAC/VDC. Test prods fit parallel and tandem slot receptacles. The puller also includes built-in resistors that limit the current flow to eliminate false indication. All those features in a tool that fits right in your pocket!
Convenient pocket-sized tool safely pulls cartridge fuses and checks electrical connections
Test prods fit parallel and tandem slot receptacles
Built-in resistors limit current flow to eliminate false indication
For 9/16 in. to 1 in. fuses, 100A/250V and 60A/600V
Test capacity from 100V to 600V AC/DC
$
55.54
Qty:
closeout
$
82.83
Qty:
Displaying: 25 - 48 of 2,221 Matching Items