Ideal
Armstrong International
View:
Active Filters :
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:201202
- Comes with 5-1/4in HD Lid Only "Water" CLS 35 VBLIDHD35 Top 26in Botton 36in.
$
224.00
Qty:
Part #:204311
- Top 24in 19lbs, Bottom 39in 22lbs
Material Cast Iron Per ASTM A48 Class 30B
Screw Type Curb Box
$
117.70
Qty:
Part #:204343
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
$
7.00
Qty:
$
21.00
Qty:
Part #:500305
-
Soft and comfortable.
Fully attach ear canal.
Good noise canceling.
Sound attenuation data according to ANSI S3.19-1974 standards.
The NRR calculated from these laboratory-based attenuation data is 33 decibels (db).
Qty:
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:504778
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:510041
- Radians Granite&trade Cap Style Hard Hats are comfortable and stylish, offering versatile protection. All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Features
Pillowed Brow Pad.
Nylon Crown Strap Suspensions.
Vertical Height Adjustment.
Quick Ratchet Adjustment System.
Easy Pinlock Adjustment System.
High Density Polyethylene Construction.
Universal Accessory Slots.
All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Made in the USA.
Qty:
Part #:510556
- Specifications Case Qty:
- 12 per box | 300 per case Case Weight
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:521546
- This popular style comes in a variety of different polycarbonate lenses to fit your application.
Lightweight, rimless design provides all day user comfort
Thin, flexible temples provide a secure fit without uncomfortable pressure points
Molded nose bridge design to fit the vast majority of users
9.5 Base curve lens
Meets ANSI Z87.1+
Part #:521547
- Radians Mirage RT&trade Safety Eyewear offers a sleek design which allows for a perfect fit. Rubber tipped temples keep safety glasses secure. The Mirage&trade family of safety eyewear is available in several styles, including rubber temples, foam lined and small sizes for all your safety glass needs.
Part #:800672
- The Neese Economy Series is basic rain wear to keep on hand for emergency weather conditions, and is made of durable water resistant PVC over polyester. The Economy Rain Coat is 48" in length and has a stand up collar and detachable hood.
PVC (.35mm) on Polyester
Stand-up collar with snaps and detachable hood
Raglan shoulder design with underarm vents
Vented upper back
Snap front closure
Lower front left and right side slash pockets
Coat is minimum of 48&rdquo long
Qty:
Part #:301703
- Greenie® Grounding Wire Connector, Model 92® Green, Box of 100
For grounding and bonding
High-leverage, contoured wing design provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
UL 486C & UL 467 Listed
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
Greenie Grounding Connectors fully meet the intent of the NEC and specifically aids in compliance with the following
Article 250 Grounding
250-146 Connecting Receptacle Grounding Terminal to Box
250-148 Continuity and Attachment of Equipment Grounding Conductors to Boxes
(B) Grounding continuity
(D) Nonmetallic boxes
Qty:
Part #:300190
- Twister® Wire Connector, Model 341® Tan, Box of 100
Swept-Wing Design Industry's Choice for Comfort
Preferred Choice for Residential Jobs
Comfortable swept wings offer extra leverage and less effort on large wire combinations
Expanding square-wire spring supports a wide range of common wiring configurations
Durable copolymer shell expands for smooth, progressive tightening that provides dependable connections
Hexagonal top with ribbed cap allows for quick fingertip start as well as use of standard 5/16 in. nutdriver for fast installation
Quick take-up on even the toughest combinations, including solid-to-stranded
Qty:
Part #:307274
- Yellow 77® Plus, 1-Quart Squeeze Bottle
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:310921
- Pre-Insulated Crimp Connector, Model 49, Box of 1,000
Crimp connectors from IDEAL are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. IDEAL&rsquos Pre-Insulated Crimp Connectors have a compact design that fits easily into tight locations.
Connectors are translucent, allowing for confirmation of proper connection
Compact design fits easily into tight locations
Flared skirt protects against turned-back strands
Beveled opening eases wire entry
Tough UL 94V-2 flame-retardant shell rated at 105°C (221°F)
$
0.23
Qty:
Part #:310280
- Wire-Nut® Wire Connector, Model 71B® Gray, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:310281
- Wire-Nut® Wire Connector, Model 72B® Blue, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Part #:310282
- Wire-Nut® Wire Connector, Model 73B® Orange, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
The American Classic since 1928
Rated for use in Air Handling Spaces
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Approved for bonding and grounding applications
Qty:
Displaying: 1 - 24 of 2,271 Matching Items