Imark/edn Milwaukee Electric
Armstrong International
View:
Active Filters :
Part #:309911
- Copper Mechanical Lug - One Hole Offset Tongue 8 Sol. to 2 Str. CU
$
1.31
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
Part #:220175
- Flat Boring Bit 6" Universal Set - 8PC
Get added convenience and reach with the Milwaukee® 8-Piece 6" Universal QUIK-LOK&trade Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK&trade allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case.
Qty:
Part #:805360
- 12" 10/14 TPI SAWZALL® Blades (5 Pk)
Milwaukee® designs and manufactures SAWZALL® blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize general purpose cutting performance.
Qty:
Part #:729-48-00-8712
- 6" 10 TPI The Torch&trade SAWZALL® Blades (25 Pk)
The Torch&trade metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form optimized for the longest life and maximum durability. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron&trade features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Qty:
Part #:729-2759-22
- M18 FUEL&trade with ONE-KEY&trade 1/2" Compact Impact Wrench w/ Pin Detent Kit (Discontinued, Replaced by 2759-20)
The M18 FUEL&trade 1/2&rdquo Compact Impact Wrench is the Most Powerful tool in its class, delivering up to 220 ft-lbs of torque in a compact design. The POWERSTATE&trade Brushless Motor not only provides unmatched power, but also greater efficiency, delivering up to 25% more run-time than the leading competitors. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM&trade Batteries deliver more work per charge and more work over the life of the pack than competitive batteries on the market.Compatible with ONE-KEY&trade, this is the industry&rsquos first Impact Wrench that wirelessly connects to a smart phone to Customize, Track and Manage a tool&rsquos performance and location. Unlimited Tool Customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. Once the desired output performance is reached, the custom profile is then saved to the memory of the tool and the connection to the smart phone is no longer necessary. The tool&rsquos memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated Tool Tracking, also available through ONE-KEY&trade, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY&trade compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you&rsquore having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY&trade app. By opting in, when any phone with the app comes within 100 ft of your tool, you will receive an updated location
Qty:
closeout
$203.00 MSRP
$
144.21
Part #:507361
- Availability: Will be backordered (Typically arrives in 10 days)
- 7.5 Amp 4-1/2" Small Angle Grinder (Discontinued, Being Replaced by 6141-30)
The 6140-30 4-1/2" 7.5 Amp Small Angle Grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Qty:
closeout
$494.00 MSRP
$
360.00
Part #:805309
- CLOSEOUTS Only 2 Left!
- M18&trade 1/2" Compact Hammer Drill/Driver Kit (Discontinued, Replaced by 2607-22CT Our Number 805306)
The most Hammer Drill/Driver in its class is more powerful than the competition. Built with a Milwaukee® 4-Pole frameless motor, the M18&trade 1/2" Hammer Drill/Driver delivers 525 in-lbs of torque and up to 1,800 RPM. At only 7-3/4" length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging worksites. REDLINK&trade Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. The REDLITHIUM&trade Battery Pack delivers more work per charge and more work over pack life than the competitors. The kit includes two M18&trade XC REDLITHIUM&trade batteries, an M18&trade and M12&trade multi-voltage charger, and a carrying case.
Qty:
Part #:805467
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Friction Ring
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE&trade Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with our M18&trade REDLITHIUM&trade FORGE&trade Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Friction Ring design allows for quick & tool-free socket changes.
Qty:
Part #:276722
- M18 FUEL&trade High Torque ½&rdquo Impact Wrench with Friction Ring Kit (Replaces 2767-22 & 2767-22R)
Our M18 FUEL&trade 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, our users will be able to get the job done faster and be more productive throughout their day. By providing the industry&rsquos most compact cordless High Torque Impact Wrench at 8.39&rdquo in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL&trade with Bolt Removal mode gives our users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. Our tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives our users ultimate comfort during prolonged use while lasting longer against corrosive materials. Our M18 REDLITHIUM&trade XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Qty:
Part #:500283
- Stainless Steel Pocket Knife 1-5/8-Inch Steel Blade
&bullCompact and lightweight knife&bull Stainless steel handle and blade for long life&bull Rosewood handle inserts on both sides&bull Modified spearpoint blade locks open
The Klein Tools Compact Pocket Knife has a 1-5/8-Inch drop point stainless-steel retractable blade. The blade can be sharpened. The beautiful rosewood handle can insert on both sides of the knife.
Qty:
Part #:803341
- 2 Blade Pocket Knife, Steel, 2-1/2-Inch Blade
&bull Standard spearpoint blade 2-1/2-Inch (64 mm) long&bull Screwdriver-tip blade 2-1/2-Inch (64 mm) long&bull Screwdriver-tip blade locks open&bull Multi-purpose tool for everyday convenience&bull Handle is plastic with faux wood grain&bull Only 3.75-Inches (95.3 mm) closed&bull Blade is constructed of high quality carbon steel
Qty:
Part #:501695
- Scissors Holder Tunnel Connection
&bull Holds Klein's Electrician's Scissors (Cat. No. 2100-5 and 2100-7)&bull Tunnel loop to fit belts up to 2-Inches (51 mm) wide&bull Riveted leather construction for long life&bull Assembled in the USA of domestic and imported components
Qty:
Part #:505102
- Cable Cutter
&bull High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable&bull Precision, one-hand shearing action&bull Cable-gripping shear-type jaws&bull Perfect for working in confined spaces&bull Can be carried in most tool pouches&bull Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges&bull Through-hardened (not case-hardened) for longer-lasting cutting surfaces&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Custom, US-made tool steel&bull Has a jaw capacity of 1.06'' (26.9 mm)
Qty:
Part #:505271
- Ratcheting Cable Cutter
&bull Reduced hand force for easier cutting&bull Patented two-step ratchet mechanism requires fewer strokes per cut&bull Cuts up to 600 MCM Copper and 750 MCM Aluminum&bull Quick release lever opens blades easily in every cutting position, to allow removal of the cable before completion of cut&bull Hardened steel cutting blades for lasting strength and sharpness&bull Locking lever keeps handles closed for easy transport fits in a tool box or bag&bull New higher cutting capacity and reduced hand force make it easier to cut large diameter cables&bull Cable Cutter Replacement Part List available for reference if needed
Qty:
Part #:800583
- Lineman's Pliers, New England Nose, 7-Inch
&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel forged for durability
Qty:
Part #:504406
- Lineman's Pliers, New England Nose, 9-Inch
&bull High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Induction hardened cutting knives for long life&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power
Qty:
Part #:504390
- Pliers, Needle Nose Side-Cutters, 6-Inch
&bull Induction hardened cutting knives for long life&bull Knurled jaws for sure wrapping and looping&bull Slim head design for working in confined areas&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Curved handles provide greater tool control&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:510182
- Pliers, Needle Nose Side-Cutters, 8-Inch
&bull Heavier design for greater cutting power&bull Extended handles provide added reach and leverage&bull Slim head design for working in confined areas&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:812334
- Pliers, Standard Needle Nose Pliers, Spring-Loaded, 6-Inch
&bull Knurled jaws for sure wrapping and looping&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Slim head design for working in confined areas&bull Spring-loaded action for self-opening&bull Curved handles provide greater tool control&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:806753
- Diagonal Cutting Pliers, High-Leverage, 8-Inch
&bull High-leverage design rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:504785
- End-Cutting Pliers, 8-Inch
&bull Wide throat clearance for clean, even, close range cutting of wire or nails&bull High-leverage design provides greater cutting power at the knives than other plier designs&bull Extended handles for longer reach and increased leverage&bull Hot-riveted joint for smooth action and no handle wobble&bull Forged steel for maximum durability&bull Made in the USA
Qty:
Part #:502910
- Diagonal Cutting Pliers, Angled Head, Short Jaw, 8-Inch
&bull Angled head design for easy work in confined spaces&bull High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel OFTEN CALLED A DYKE
Qty:
Part #:800586
- Diagonal Cutting Pliers, Heavy-Duty, All-Purpose, 6-Inch
&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Tapered nose for easy working in confined areas&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Displaying: 1 - 24 of 2,311 Matching Items