Best Welds
Armstrong International
View:
Active Filters :
Part #:804353
- Best Welds SoapstonesProduct DetailsAll white texture for excellent marking qualityGrain cut to ensure good strength and long service lifeMarks will not contaminate welds and are easily removedLow water content for increased hardness and resistance to breakage
Part #:500563
- The Original&trade Curved Jaw Locking Pliers with Wire Cutter Features
Curved jaw with built-in wire cutter great for a variety of applications and material shapes.
Classic trigger release provides maximum locking force.
Convenient wire cutter included
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.
Hardened teeth are designed to grip from any angle.
Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release.
Backed by the IRWIN VISE-GRIP Lifetime Guarantee.
Qty:
Part #:510750
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Convenient wire cutter cuts up to a 1/4" boltLong, straight nose allows for use in narrow spaces not reachable by curved or straight jawsUse to clamp or tighten bolts or to extract items in hard-to-reach places
Qty:
Part #:500407
- The Original&trade Long Nose Locking Pliers with Wire Cutter Features
Long, straight nose provides easy access in narrow, hard-to-reach places. Ideal for precision work and hobbies, includes convenient wire cutter
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Hardened teeth are designed to grip from any angle
Qty:
Part #:500917
- The Original&trade Locking C-Clamps with Regular Tips Features
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Qty:
Part #:500553
- The Original&trade Locking C-Clamps with Regular Tips Features
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Qty:
Part #:502900
- New Fast Release&trade Locking Clamp With Swivel Pads Features
20% Reduced Hand Span¹ improves user control and helps reduce hand strain
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work and delicate materials while reducing damage to the work surface
Redesigned tactile grip zone helps improve user control and is suited for high-temperature applications
Hex key adjusting screw tightens to adjust pressure and draws materials together, providing a more controlled release
Made with a one-handed, triggerless release that is 2X easier to open²
Built with heat treated alloyed steel for maximum durability
Backed by IRWIN Lifetime Guarantee
¹ Compared to previous VISE-GRIP® FAST RELEASE&trade design. Reduced hand span applies to 10&rdquo and 11&rdquo models only.
Qty:
Part #:800692
- Alumina Nozzle TIG Cup, 7/16", Size 7, For Torch 17, 18, 26, Gas Lens
Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
1.84
Qty:
Part #:800693
- Alumina Nozzle TIG Cup, 3/8", Size 6, For Torch 17, 18, 26, Gas Lens
Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
2.45
Qty:
Part #:800691
- Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
1.84
PACK
Qty:
Part #:841-900-9-70M
- Best Welds TIG Torch HeadsProduct DetailsTorch head for TIG welding torchReliable quality
$
45.00
Qty:
Part #:841-900-9-90M
- Best Welds TIG Torch HeadsProduct DetailsTorch head for TIG welding torchReliable quality
$
46.35
Qty:
Part #:841-900-1726PM
- Best Welds TIG Torch BodiesProduct DetailsTorch body for TIG welding torchReliable quality
$
46.35
Qty:
Part #:841-900-1726M
- Best Welds TIG Torch BodiesProduct DetailsTorch body for TIG welding torchReliable quality
$
46.35
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:841-585-3095001
- Features and Benifts
&bull Adaptors feature a 3/8" square drive toaccommodate socket wrench or extension&bull Designed for use with taps, reamers, screwextractors, and other tools with a square shank&bull Not recommended for cutting new threads
Qty:
Part #:841-900-3327GE3
- Best Welds Tungsten ElectrodesProduct DetailsLonger life than thoriated electrodesNon-radioactive additivesCan be used in both AC and DC processesExcellent arc starting and stability
Qty:
Part #:500556
- The Original&trade Straight Jaw Locking Pliers Features
Straight jaws provide maximum contact on flat, square, or hex work
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Hardened teeth are designed to grip from any angle
Qty:
Part #:500557
- The Original&trade Straight Jaw Locking Pliers Features
Straight jaws provide maximum contact on flat, square, or hex work
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Classic trigger release designed to provide maximum locking force
Hardened teeth are designed to grip from any angle
Qty:
Part #:841-902-2400-OR-40
- Best Welds Heavyweight Fiberglass Fabric, 50 yd x 40 in, Orange
Best Welds Heavyweight Fiberglass FabricProduct DetailsIndustry-strength, plain-weave fiberglass fabric with a light clear acrylic coating to minimize fraying and unraveling of cut edgesDesigned for use in areas where a fabric with high heat resistance is required
Qty:
Part #:841-900-225M-25-R
- 225 Amp Water Cooled TIG Torch, Flex Head, 25 ft Rubber Cable
Best Welds 225M Series Modular TIG TorchesProduct DetailsMaintains excellent dielectric propertiesTorch heads will not crack5 torch head options2 piece constructionIncludes1PC Rubber Power CableHandleWrenchWater & Gas Hoses
$
536.46
Qty:
Part #:841-900-45V26
- Best Welds Gas Lense Collet BodiesProduct DetailsGas lenses provide a more efficient stream of shielding gas to the welding processThe gas lens virtually eliminates turbulence in the gas shielding stream as it emerges from the nozzleTwo-piece construction
$
17.83
PACK
Qty:
Displaying: 1 - 24 of 2,132 Matching Items