K-Flex
Armstrong International
View:
Active Filters :
- Brand: Armstrong International K-Flex Milwaukee Tools
- Size: 3/8in 4in
Part #:521570
- 4" Full Cable Twist Knot Wheel - Stainless Steel
The Full Cable Twist Knot Wire Wheel is designed for general heavy duty cleaning of scale, surface oxidation, rubber flash, heavy burrs and weld splatter. Full Cable Twist Knot Wire Wheels are available in carbon and stainless steel. This Cable Knot Wire Wheel is designed for use with 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of stainless steel.
Qty:
Part #:729-48-03-4405
-
SHOCKWAVE&trade 1/4" HEX ADAPTER SQ 3/8"
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Length 1-7/8in
Qty:
Part #:729-48-52-5000
-
4" Stringer Bead Wheel - Stainless
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than Knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 7 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:285420
- M18 FUEL&trade 3/8" Compact Impact Wrench w/ Friction Ring
Our M18 FUEL&trade 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering you the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 4.8" in length with a POWERSTATE&trade Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 3/8" Compact Impact Wrench has tri-LEDs that surround the anvil to deliver you brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS&trade Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18&trade REDLITHIUM&trade battery pack (not included) fits M18&trade tools, delivering more work per charge and more work over the life of the pack.
Qty:
Part #:729-2457-21
- M12&trade Cordless 3/8" Lithium-Ion Ratchet Kit
Choose the sub-compact ratchet with best-in-class power, speed and durability. The M12&trade Cordless 3/8&rdquo Lithium-Ion Ratchet is the ideal tool for auto mechanics, maintenance and repair professionals looking for maximum performance and productivity in a subcompact cordless tool. It utilizes a powerful 12-volt motor to produce up to 35 ft-lbs of torque and 250 RPM, giving users the power and speed of a pneumatic ratchet without the airhose. It&rsquos powered by the M12 REDLITHIUM&trade Battery Pack, which delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme jobsite conditions. At just 10-3/4&rdquo long and 1.9 lbs, the ratchet is tool-belt portable, and features a 3/4" low-profile head design for work in the tightest of spaces and engine bays. The variable-speed metal trigger and reinforced steel housing provide maximum control and durability with any application. The kit includes one M12 battery, a 30-minute charger, a 3/8&rdquo to 1/4" adapter and carrying case.
Qty:
Part #:503172
- 4" Full Cable Twist Knot Wheel - Carbon Steel
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than Knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 7 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:503224
- Spline Bit 2-Cutter 3/8" x 10"
Milwaukee®'s Spline 2-Cutter Rotary Hammer drill bits are used for drilling intro brick, block, and concrete
Qty:
Part #:508592
- SDS-PLUS 4CT MX4&trade 3/8" X 4" X 6"
Qty:
Part #:508593
- SDS-PLUS 4CT MX4&trade 3/8" X 10" X 12"
10" Working Length
Qty:
Part #:729-2407-22
- M12&trade 3/8&rdquo Drill/Driver Kit
Our M12&trade 3/8&rdquo Drill/Driver Kit drills and fastens up to 35% faster than its competitors and is the only tool in its class that has an all-metal locking chuck. The powerful compact cordless drill driver delivers 275 in-lbs of torque &ndash up to 25% more torque than the competition &ndash and 0-400/0-1,500 RPM. Its compact, lightweight and durable design offers you greater comfort and efficiency on the job site. The all-metal single-sleeve ratcheting chuck gives you superior bit grip so you won't have to stop for bit retightening or risk losing bits. The drill driver features an onboard LED light and fuel gauge helping you increase productivity and avoid interruptions. The REDLITHIUM&trade Battery Pack gives you more work per charge and more work over pack life than the competitors. In addition to the compact drill driver, the kit includes two M12&trade REDLITHIUM&trade batteries, a 30-minute charger and carrying case.
Qty:
Part #:507744
- 3/8" x 12" Aircraft Length Black Oxide Drill Bit
Milwaukee Aircraft Length Black Oxide drill bits are ideal for extra reach and deep drilling applications in metal, wood and PVC. The 135° split point tip delivers a precision start and prevents walking for fast, accurate holes. The 3-Flat Secure-Grip&trade shank holds the bit firmly in the drill chuck to prevent slipping.
Qty:
Part #:805431
- INSUL-TUBE® products are non-porous, non-fibrous and are approved by Factory Mutual Research Corporation. APPLICATIONS Air conditioning Cold water Chilled water Refrigeration Duct wrap Hot water:
$
0.84
Qty:
Part #:729-48-32-5031
- SHOCKWAVE&trade 1/4" Hex to 3/8" Square Socket Adapter
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Qty:
Part #:729-48-32-5731
- SHOCKWAVE&trade 1/4" Hex to 3/8" Square Socket Adapter
Our MILWAUKEE® SHOCKWAVE&trade Square Socket Adapter transforms impact socket wrenches into impact drivers with square hex bits for every application. Our Milwaukee Impact Duty&trade socket adapters are made from a proprietary steel, heat treated to control hardness and provide durability with up to 50X life. Our socket adapter has a heavy-duty construction for fastening capabilities in all impact drivers, built to withstand frequent use. Milwaukee hex to square socket adapters are engineered for maximum durability and long-lasting use. This impact sockets adapter is designed for use with impact drivers.
Qty:
Part #:506641
- 4" Radial Crimped Wheel- Carbon Steel
The Crimped Wire Brush is suited for general purpose surface cleaning and conditioning. Milwaukee offers Crimped Wire Wheels in both carbon and stainless steel. The brush is designed for use on 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of carbon steel.
Qty:
Part #:521670
- 4" Stringer Bead Wheel - Carbon Steel
For maximum weld cleaning in confined area, the narrow faced Stringer Bead Wheel provides aggressive action. A tight twist provides the narrow profile with the required stiffness to clean pipe joints in fabrication shops and pipeline maintenance. Stringer Bead Wheels are available in both carbon and stainless steel. This Stringer Bead Wheel is designed for use on 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of stainless steel.
Qty:
Part #:729-48-52-1300
-
4" Crimped Wire Cup Brush- Carbon Steel
For lighter duty surface cleaning a Crimped style Cup Brush is appropriate. Crimped wire is less rigid than Knotted and can get into crevices more easily. Milwaukee offers a full range of Crimp and Knotted Wire Cup Brushes. This Crimp Wire Cup Brush is designed to be used on 7 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made from carbon steel wire.
Qty:
Part #:805210
- 4" 14 TPI SAWZALL® Blades (5 Pk)
Thin Kerf metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form that is optimized for the longest life and increased speed. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Maintaining a short profile and thin body, these blades are ideal for making fast, flexible cuts.
Qty:
Part #:509947
- SHOCKWAVE&trade 2-9/16" MAG NUTDRIVER 3/8"
Qty:
Part #:504347
- 1/4" x 4" High Speed Steel Pilot Bit
Qty:
closeout
$
3.93
Qty:
closeout
$
3.88
Qty:
Qty:
Part #:501-D25979
- DS Series In-Line Condensate SeparatorsDuctile Iron Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Displaying: 1 - 24 of 47 Matching Items