Dixon Valve & Coupling Company
Armstrong International
View:
Active Filters :
Part #:700295
- Male NPTF x Hose Barb Attributes
Weight
0.061 lb
Material
Brass
Male Thread
NPTF
Length
1.76"
Hose ID
3/8"
Hex
11/16"
Male Thread Size
3/8"
$
2.03
Qty:
Part #:702874
- Barbed Hose Mender Attributes
Weight
0.0405 lb
Material
Brass
Length
2.06"
Hose ID
3/8"
$
1.59
Qty:
Part #:100150
- Clear PVC Tubing Attributes
Tube OD
1/2"
Weight
5.95 lb
Material
PVC
Tube ID
3/8"
Color
Clear
Working Pressure
70 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
0.65
Qty:
Part #:804337
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.25 lb
Material
Global Investment Cast Carbon Steel
Torque
6 ft. lbs.
Hose ID
3/8" (9.5 mm)
Hose OD To
56/64" (22.3 mm)
Hose OD From
44/64" (17.46 mm)
$
7.17
Qty:
Part #:700304
- Female NPTF x Hose Barb Attributes
Weight
0.063 lb
Material
Brass
Female Thread
NPTF
Length
1.66"
Hose ID
3/8"
Hex
3/4"
Female Thread Size
3/8"
$
2.44
Qty:
Part #:804346
- Air King® 2-Lug Hose End Attributes
Weight
0.425 lb
Size
3/8"
Material
Iron, global investment cast
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.29
Qty:
Part #:334-RST2520
- King Combination Nipple NPT Threaded Attributes
Weight
0.97 lb
Material
316 Stainless Steel
Thread
NPT
Thread Size
1-1/2"
Hose Shank Size
2"
$
68.62
Qty:
Part #:512587
- Steel 3500 Male Nipple Attributes
Weight
0.13 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
3/8"
Male Thread Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
$
7.06
Qty:
Part #:506181
- Steel 3500 Female Nipple Attributes
Weight
0.125 lb
Material
Zinc Plated Steel
Female Thread
NPT
Hose Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
Female Thread Size
3/8"
$
12.01
Qty:
Part #:334-STC2520
- Jump Size King Combination Nipple NPT Threaded Attributes
Weight
0.99 lb
Material
Plated Steel
Thread
NPT
Thread Size
1-1/2"
Hose Shank Size
2"
$
17.33
Qty:
Part #:503141
- Air King® 2-Lug Male NPT End Attributes
Weight
0.52 lb
Size
3/8"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.41
Qty:
Part #:505943
- Air King® 2-Lug Female NPT End Attributes
Weight
0.55 lb
Size
3/8"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.32
Qty:
Part #:202687
- 1402023:
Qty:
Part #:334-2015-B-SS
- Cam & Groove Reducing Type B Coupler x Male NPT:
$
242.01
Qty:
Part #:501-D500578
- CD-40 and CD-60 Series Controlled Disc Steam TrapsFor pressures to 600 psig (41 barg)
Capacities to 2,850 lb/hr (1 295 kg/hr)
Armstrong CD-40 and CD-60 Series controlled disc traps contain a replaceable capsule, making it possible to renew a worn trap by simply replacing the capsule. A heating chamber in the shell ensures consistent operation. This steam jacket provides a relatively constant temperature in the control chamber regardless of ambient conditions. Cycling rate is controlled and does not increase when the trap is exposed to cold winds, rain or snow. CD-40 Series traps are also available with optional integral .045 perforated stainless steel strainer screens. CD-60 Series traps contain integral strainers with ratios of open area to inside area of pipe that equal or exceed those of most separate Y-type strainers.
Qty:
Part #:501-D503146
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable
The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure.
Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog.
Conserves energy even in the presence of wear
Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps.
In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring.
An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply.
Corrosion-resistant parts
The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel.
Venting of air and CO2
The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding.
Operation against back pressure
The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap.
Freedom from dirt problems
Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them.
Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:501-D541398
- Thermostatic Wafer Steam TrapsArmstrong offers several thermostatic wafer steam traps. The WT-1 is ideal for low-capacity steam tracers and features an exclusive non-welded wafer design, a sealed stainless steel body and an internal strainer screen two to three times larger than that of other thermostatic traps. Choose from NPT or BSPT screwed connections.
The WT-2000 is adaptable to a 360 connector to expand piping options and simplify installation. Choose NPT or BSPT screwed or socketweld connections. The WT-2000 is also available for use on the IS-2 stainless steel connector with integral strainer. It can also be used with the TVS 4000.
Armstrongs WT-3 is a carbon steel thermostatic wafer trap for superheated drip service. It features an exclusive non-welded wafer design, which eliminates problems associated with weld stress. The WT-3 has no thin-walled enclosures such as bellows or welded diaphragms. It is also resistant to water hammer. Choose NPT or BSPT screwed or socketweld connections.
The Series MT from Armstrong is sized precisely to accommodate the extremely low condensate loads found in most instrument steam tracer lines.
NOTE Since the normal operation of all suppressed temperature-discharge (subcooling) steam traps is to back up condensate, they should not be used on drip legs for saturated steam service, heating or process equipment. Exercise care in the maintenance of any thermostatic wafer trap with a small discharge area susceptible to clogging.
Qty:
Part #:501-D691280
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable
The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure.
Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog.
Conserves energy even in the presence of wear
Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps.
In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring.
An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply.
Corrosion-resistant parts
The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel.
Venting of air and CO2
The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding.
Operation against back pressure
The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap.
Freedom from dirt problems
Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them.
Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:334-1290606C
- Male NPTF x Hose Barb 90° Elbow Attributes
Weight
0.089 lb
Material
Brass
Male Thread
NPTF
Hose ID
3/8"
Male Thread Size
3/8"
$
4.23
Qty:
Part #:334-2015-DA-SS
- Dixon Cam & Groove Jump Size Type DA Coupler x Adapter Attributes
Maximum Operating Pressure
250 PSI
Weight
2.56 lb
Material
316 Stainless Steel
Seal
Buna-N
Coupler Size
2" (50 mm)
Adapter Size
1-1/2" (40 mm)
$
186.84
Qty:
Part #:334-1790606C
- Barbed Tee Splicer Attributes
Weight
0.08 lb
Material
Brass
Hose ID
3/8"
$
3.98
Qty:
Part #:713386
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg) Capacities to 2,500 lb/hr (1,134 kg/hr). The Armstrong CD-33 is a disc-style trap designed to control the trap&rsquos cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs. The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure. The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the application&mdashand are not oversized&mdashthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Here&rsquos why &bull Three-discharge port design &bull Minimum wear with controlled cycling &bull Freeze resistant &bull Hardened seat and disc
Qty:
Part #:334-2015-A-SS
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
250 PSI
Weight
1.3 lb
Female Thread Size Metric
40mm
Material
316 Stainless Steel
Female Thread
NPT
Adapter Size
2" (50 mm)
Female Thread Size
1-1/2"
$
96.55
Qty:
Part #:334-1690606C
- 90° NPTF Male Pipe Elbow
Attributes
Weight
0.087 lb
Optional Package/Box Quantity
25
Material
Brass
Male Thread
NPTF
Male Thread Size
3/8"
$
4.70
Qty:
Displaying: 1 - 24 of 26 Matching Items