Emerson Professional Tools, Llc
Armstrong International
View:
Active Filters :
Qty:
Part #:502787
- Brute Vented Trash Receptacle, Round, 44 gal, Gray
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
Qty:
Part #:917-37940
- Manual Threader Pipe & Bolt Dies
Qty:
Part #:502583
- 2-A 1/8" - 2" Heavy Duty Pipe Cutter
Qty:
Part #:808152
- HEAVY-DUTY STRAIGHT PIPE WRENCHES&bull Straight Pipe Wrenches have a sturdy, ductile-iron housing andan I-beam handle with a full floating forged hook jaw, featuringself-cleaning threads with replaceable hook and heel jaws.&bull Heavy-duty pipe wrenches comply with federal specificationsGGG-W65IE, Type II, Class A.
18", 2-1/2" Pipe Capacity
Qty:
Part #:508442
- EVERYDAY DIRT 1-LAYER PLEATED PAPER FILTERThe RIDGID® 1-layer replacement wet/dry vac filter is great for everyday dirt. Everyday dirt is bestdescribed as sawdust or typical debris found in a basement, garage or vehicle. With its patented QwikLock&trade feature, it simply snaps on or off the vacuum for easy cleaning.&bull Washable and reusable.&bull Includes 1 filter per package.SPECIFICATIONS&bull Best for&ndash Sawdust&ndash Typical basement, garage, or car dirt&bull Fits vac sizes &ndash 5-20 gallons
Everyday Dirt Filter White
FILTER ASM 8.23 STD WHITE
Qty:
Part #:502587
- Pipe Dies for Machine Die Heads
Qty:
Part #:502595
- Pipe Dies for Machine Die Heads
Qty:
Part #:507433
- ALUMINUM STRAIGHT PIPE WRENCHES&bull RIDGID® Aluminum Pipe Wrenches provide professional strength inlightweight aluminum. The Aluminum Straight Pipe Wrench offersthe same durability and ease-of-use found in all RIDGID heavy-dutywrenches.
1-1/2" Pipe Capacity
Qty:
Part #:507431
- ALUMINUM STRAIGHT PIPE WRENCHES&bull RIDGID® Aluminum Pipe Wrenches provide professional strength inlightweight aluminum. The Aluminum Straight Pipe Wrench offersthe same durability and ease-of-use found in all RIDGID heavy-dutywrenches.
2" Pipe Capacity
Qty:
Part #:808050
- ALUMINUM STRAIGHT PIPE WRENCHES&bull RIDGID® Aluminum Pipe Wrenches provide professional strength inlightweight aluminum. The Aluminum Straight Pipe Wrench offersthe same durability and ease-of-use found in all RIDGID heavy-dutywrenches.
2-1/2" Pipe Capacity
Qty:
Part #:808044
- ALUMINUM STRAIGHT PIPE WRENCHES&bull RIDGID® Aluminum Pipe Wrenches provide professional strength inlightweight aluminum. The Aluminum Straight Pipe Wrench offersthe same durability and ease-of-use found in all RIDGID heavy-dutywrenches.
3" Pipe Capacity
Qty:
Part #:510883
- ALUMINUM STRAIGHT PIPE WRENCHES&bull RIDGID® Aluminum Pipe Wrenches provide professional strength inlightweight aluminum. The Aluminum Straight Pipe Wrench offersthe same durability and ease-of-use found in all RIDGID heavy-dutywrenches.
5" Pipe Capacity
Qty:
Part #:502575
- #10 Tubing & Conduit Cutter with Heavy-Duty Wheel
Qty:
Part #:505214
- THREAD CUTTING OILRIDGID® thread cutting oils are free of chlorine and other halogens, PCBs and heavy metals. Completematerial safety data sheet available.&bull Cools threads and pipe during operation.&bull Speeds metal removal.&bull Improves thread quality.&bull Reduces threading torque.
Low Mist, Anti-Mist Formulation
Working Viscosity 0 Degrees F
Qty:
Part #:502527
- RATCHET & HANDLE ONLY&bull Ratchet knob indicates forward and reverse.&bull Die heads snap in from both sides and lock in place.
Qty:
Part #:502927
- CLOSE QUARTERS TUBING CUTTERS
Rollers include grooves for close-to-flare cuts on models 101, 101J and 118.
Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.
Models 117 and 118 include a self-feeding AUTOFEED® cutter wheel that automatically cuts after tightening the knob only once.
The Model 118 features a special knob for easier tightening of the feedscrew.
Model 101-ML is for multilayer tubing only.
Qty:
Part #:508262
- CLOSE QUARTERS TUBING CUTTERS&bull Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum,brass and plastic tubing.
Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control ofcutting pressure for clean cuts.
Qty:
Part #:808103
- CONSTANT SWING TUBING CUTTERS&bull Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-flarecuts, and a fold-away reamer.&bull X-CEL® Knob cuts tubing more quickly and easily with our larger, more ergonomic designs.&bull X-CEL Wheel Pin &ndash changes your cutter wheel quickly using a new ball detent design&hellipno toolneeded&hellipno lost clips!&bull Spare cutter wheel included in the knob.&bull Made from high-strength zinc alloy.&bull Cuts copper, brass, and aluminum tubing and thin-wall conduit.
Constant Swing Cutter E-3469 1/8"-1-1/8" Capacity
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:502574
- #10 Screw Feed Tubing & Conduit Cutter
Qty:
Part #:502592
- Fits 1A,2A,42A,202,360,820V364,732
Applications Steel & Ductile Iron
Qty:
Displaying: 1 - 24 of 2,218 Matching Items