Greenlee
Armstrong International
View:
Active Filters :
Part #:502787
- Brute Vented Trash Receptacle, Round, 44 gal, Gray
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
Qty:
Part #:500594
- 1-1/8" Step Bit (#9)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2" drill chucks
Laser markings for quick, easy product and size identification.
Replaced 30008
Also available for sale in a carton, qty. 25 (Cat # GSB09-B UPC # 783310082071)
$
71.95
Qty:
Part #:500536
- 1/2" Step Bit (#1)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34401
Also available for sale in a carton, qty. 25 (Cat # GSB01-B UPC # 783310082057)
Qty:
Part #:500574
- 7/8" Step Bit (#4)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34403
Also available for sale in a carton, qty. 25 (Cat # GSB04-B UPC # 783310082040)
$
55.05
Qty:
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
$
72.00
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:510294
- Angled Large Broom, Poly Bristles, 46 7/8" Metal Handle, Yellow/Gray
RCP637500GY
Be the first to write a review
Bristles are cut and shaped for easy sweeping.
Angled bristles are designed for cleaning hard-to-reach places.
Permanent fusion set bristles won't pull out.
$
28.26
Qty:
Part #:713360
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713363
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
$
34.30
Qty:
Part #:504951
- Standard Round 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
New die design optimized for widest range of materials and drivers
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading.
Knockout set punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
Laser markings for quick part identification. Alignment markings for improved accuracy.
$
299.00
Qty:
Part #:807974
- 11/16 x 18 Nail Eater® Bit
Improved cutting edge provides 30% longer life span
Patented new design for improved cutting and cleaner holes
Self-feeding screw point draws bit through wood
Unique patented design cutting angle - smoother starts, reduced cutting loads
Made of super tough, heat-treated steel
Cuts through nails and provides longer life
Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s
See Bit Extensionsif more length is required
P.O.P packaged
$
34.45
Qty:
Part #:500437
- 1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 60246
$
60.60
Qty:
Part #:500493
- 3/4" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Knockout sets are laser marked for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-3/4
$
78.75
Qty:
Part #:811000
- Pro Stainless Wire Stripper / Cutter / Crimper
High grade stainless steel lasts 5X longer
Precision ground stripping holes offer easy, consistent jacket removal
Strips 10-18 AWG Solid and12-20 AWG Stranded conductors
Cleanly shears 6-32 and 8-32 bolts
Crimps 16-10 insulated and non-insulated terminals
Multiple functions include plier nose, strippers, cutter, looping holes, crimper, bolt re-thread/shear and spring back with low profile lock
Looping holes and serrated nose for bending, pulling and shaping wires
Long-life spring and low-profile lock for quick, repetitive stripping and cutting
Vinyl cushion grip resists slipping and has an ergonomic fit
$
24.65
Qty:
Part #:713381
- Float and Thermostatic (F&T) Steam TrapsThe More Your Steam Pressure Varies, The More You Need Armstrong F&T TrapsWhen steam pressure may vary from maximum steam supply pressure to vacuum, Armstrong F&Ts are your most energy-efficient choice. Our line of F&Ts brings Armstrong performance, dependability and long life to trapping services requiring continuous drainage with high air venting capacity. Thanks to separate orifices for condensate and air, they provide continuous condensate drainage and air venting-even under conditions of zero pressure. All the benefits detailed here have been designed into Armstrong F&Ts through long experience in the manufacture of pressure float-type traps. They assure you of optimum operating efficiency for long periods with minimum trouble. How they work Float and thermostatic traps are mechanical units that operate on both density and temperature principles. The float valve operates on the density principle. A level connects the ball float to the valve and seat. Once condensate reaches a certain level in the trap, the float rises, opening the orifice and draining condensate. A water seal formed by the condensate prevents live steam loss. Since the discharge valve is under water, it is not capable of venting air and non-condensables. When the accumulation of air and con-condensable gases causes a significant temperature drop, a thermostatic air vent in the top of the trap discharges them. The thermostatic vent opens at a temperature a few degrees below saturation, so it's able to handle a large volume of air-through an entirely separate orifice-but at a slightly reduced temperature. Built as tough as the jobs they do Armstrong float and thermostatic traps are unique in their super heavy duty construction. Armstrong uses high quality ASTM A48 Class 30 cast iron or ASTM A216 WCB cast steel-normally found in pressure vessels rated to 250 psi (17 bar) or 465 psi (32 bar). Internal mechanisms are made from stainless steel and are heavily reinforced. No brass cotter pins here. Valves and seats are stainless steel, hardened, ground and lapped to withstand the erosive forces of flashing condensate. Why go to all this trouble for traps normally recommended for low-pressure, modulating service? The operative word here is modulating. Modulating pressures mean widely varying loads, thermal cycling and high air and non-condensable gas loads. In other words tough service. Inferior, lightweight construction in this kind of service is a mistake waiting to happen. Trap failures on modulating pressure may lead to water hammer, corrosion and even damage to heat exchangers. Armstrong's published capacities are based on actual measurements of traps handling hot, flashing condensate. Competitive F&Ts may utilize theoretical calculated capacities. Armstrong uses its own steam lab to give you actual capacity-especially important on high-capacity traps such as those in our ultra-capacity line. Not only does Armstrong offer super heavy duty construction for long life and reliability, but we also supply the data to back up performance. Here's a simple, easy-to-remember summary The more your pressure varies, the more you need Armstrong F&Ts.
Qty:
Part #:501131
- Round Brute Container, Plastic, 32 gal, Gray
RCP263200GY
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
$
64.65
Qty:
Part #:500394
- Description
Hygienic top for handsfree waste disposal. Drop-and-swing design provides easy access for refuse disposal and then quickly returns to hide refuse from public view. Crack-resistant plastic. Controls waste, odors and smoking debris.
Product Details
Global Product Type
Waste Receptacle Lids-Swing-Top Lids
Lid Type
Swing-Top Lid
Shape
Square
Color(s)
Gray
Material(s)
Plastic
Width
20.13"
Depth
20.13"
Height
6.25"
For Use With
Rubbermaid® Commercial 395800, 395900
Compliance Standards
ADA Compliant
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Country Of Origin
US
Carton Weight
23 lbs.
Carton Pack Quantity
4 EA
UPC
086876057621
UNSPSC
47121704
Shipping Weight & Item Dimensions
Weight
5.401 lbs.
Length
20.125 in
Height
6.25 in
Width
20.125 in
$
116.22
Qty:
Displaying: 1 - 24 of 2,071 Matching Items