Hilti
Armstrong International
View:
Active Filters :
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
Part #:601462
- Features&bull High flow and high sensitivity&bull Constant bleed option for semi-precisionapplications&bull Can be used for water service(non-relieving)&bull Unbalanced poppet standard&bull Diaphragm operated for fast response&bull Non-rising adjusting knob&bull Stainless steel version available(see stainless steel section of catalog)&bull High flow 10 SCFM§ (Air)1.25 GPM (Water)
$
39.23
Qty:
Part #:601925
- Features&bull Excellent water removal efficiency&bull For heavy duty applications withminimum pressure drop requirement&bull Unique deflector plate that createsswirling of the air stream ensuringmaximum water and dirt separation&bull Large filter element surfaceguarantees low pressure drop andincreased element life&bull 40 micron filter element standard,5 micron available&bull Metal bowl with sight gauge standard&bull Twist drain as standard, optionalauto drain&bull Large bowl capacity&bull Optional high capacity bowl(s) available&bull High flow1" &ndash 300 SCFM
$
241.96
Qty:
Part #:601950
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quickand accurate regulation&bull Secondary aspiration plus balancedpoppet provides quick responseand accurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull Panel mount version available&bull High flow 1/4" &ndash 100 SCFM§
$
101.08
Qty:
Part #:601951
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quickand accurate regulation&bull Secondary aspiration plus balancedpoppet provides quick responseand accurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull Panel mount version available&bull High flow3/8" &ndash 110 SCFM§
$
101.08
Qty:
Part #:601955
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quickand accurate regulation&bull Secondary aspiration plus balancedpoppet provides quick responseand accurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull Panel mount version available&bull High flow 1/2" &ndash 150 SCFM§
$
120.39
Qty:
Part #:601964
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quick andaccurate regulation&bull Secondary aspiration plus balancedpoppet provides quick response andaccurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull High flow1" 400 SCFM
$
190.54
Qty:
Part #:602637
-
This 1/2 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 3 to 15 psi (0.21 to 1.0 bar).
Product Features
NPT threaded female inlet and outlet connections
Iron body
Serviceable in line
Stainless steel disc
Qty:
Part #:602640
-
This 1/2 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 3 to 15 psi (0.21 to 1.0 bar).
Product Features
NPT threaded female inlet and outlet connections
Iron body
Serviceable in line
Stainless steel disc
Qty:
Part #:602641
-
This 1/2 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 30 to 140 psi (2.1 to 9.7 bar).
Product Features
NPT threaded female inlet and outlet connections
Stainless steel disc
Iron body
Serviceable in line
Qty:
Part #:602642
-
This 3/4 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 3 to 15 psi (0.21 to 1.0 bar).
Product Features
NPT threaded female inlet and outlet connections
Stainless steel disc
Serviceable in line
Iron body
Qty:
Part #:602644
-
This 3/4 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 30 to 140 psi (2.1 to 9.7 bar).
Product Features
NPT threaded female inlet and outlet connections
Stainless steel disc
Iron body
Serviceable in line
Qty:
Qty:
Qty:
Qty:
Part #:600443
-
This kit includes parts necessary to repair a 3/4 inch steam pressure regulator, series 152A. It contains stem and bushing assembly, diaphragm, diaphragm gasket, bottom plug gasket, bottom spring, strainer, disc and seat.
Product Features
Diaphragm gasket to seal
Stainless steel strainer
All parts are made of high quality materials
No special tools required
Qty:
Part #:511331
-
HIT-HY 200-A V3 Adhesive anchor (New Verision)
Ultimate-performance injectable hybrid mortar with approvals for anchoring structural steel baseplate and post-installed rebar connections
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS SoftwareYes
Base materialsConcrete (cracked), Concrete (lightweight), Concrete (uncracked)Approvals / Test reportsDOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, SeismicPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
HIT-HY 200-A Adhesive anchor Hybrid adh HY 200-A 11.1oz/330ml #2022791 (Old Verision)Base materialsConcrete (cracked), Concrete (uncracked), Masonry (grout-filled CMU)Base material conditionDry, WetApprovals / Test reportsICC-ES report (concrete), SeismicSeismic loadingYesFatigue loadingNoFire resistanceNoPROFIS SoftwareYesClean-TecNoAnchoring elementsHAS threaded rods, HIS-N internally threaded sleeves, HIT-Z torque controlled bonded anchors, RebarCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air Cleaning, Non CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 248 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct ClassUltimate
$
64.39
Qty:
Part #:511683
-
HIT-HY 200-R Adhesive anchor Hybrid adh HY 200-R 11.1oz/330ml #2022793 Replaced By
HIT-HY 200-R V3 Adhesive anchor
Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural steel baseplate
Base materials Concrete (cracked), Concrete (lightweight), Concrete (uncracked)
Approvals / Test reports DOT approval (contact Hilti), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Seismic
PROFIS Software Yes
$
64.39
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
7.49
Qty:
Displaying: 1 - 24 of 2,225 Matching Items