Asc Engineered Solutions
Armstrong
View:
Active Filters :
Part #:100183
- Clear PVC Tubing Attributes
Tube OD
3/4"
Weight
14.5 lb
Material
PVC
Tube ID
1/2"
Color
Clear
Working Pressure
85 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
1.54
Qty:
$
1,436.54
Qty:
$
708.42
Qty:
Part #:302335
- .33HP, 1140RPM, 1PH, 60HZ, 56, 3424L, TEFC, F1
$
654.33
Qty:
Part #:302577
- .75HP, 1140RPM, 1PH, 60HZ, 56H, 3528LC, TEFC, F
$
1,104.43
Qty:
$
708.42
Qty:
$
787.22
Qty:
$
832.52
Qty:
$
879.52
Qty:
$
908.44
Qty:
$
951.35
Qty:
$
2,213.24
Qty:
Part #:302911
- 20HP, 1770RPM, 3PH, 60HZ, 256T, 0960M, TEFC, F1
Output20.000 hp
Phase3
Synchronous Speed1,800 rpm
Frequency60.00 Hz
Voltage230 V460 V
Frame MaterialIron
Frame256T
XP Class and GroupNONE
XP DivisionNot Applicable
BrandBaldor-Reliance
Agency ApprovalsCSACSA EEVUR
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorRigid
Bearing Grease TypePOLYREX EM (-20F +300F)
BlowerNone
Current52.0 A @ 208 V48.0 A @ 230 V24.0 A @ 460 V
Design CodeA
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load93.0%
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNo feedback
Front Face CodeStandard
Front Shaft IndicatorNone
Heater IndicatorNo heater
High Voltage Full Load Amps24.0 A
Insulation ClassF
Inverter CodeInverter ready
KVA CodeJ
Lifting LugsStandard Lifting Lugs
Locked Bearing IndicatorLocked Bearing
Motor Lead ExitKO Box
Motor Lead Quantity/Wire Size9 @ 10 AWG
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type0960M
Number of Poles4
Overall Length23.28 in
Power Factor83
Product FamilyGeneral Purpose
Pulley End Bearing TypeBall
Pulley Face CodeStandard
Pulley Shaft IndicatorStandard
Rodent ScreenNone
Service Factor1.15
Shaft Diameter1.625 in
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorShaft Slinger
Speed1,770 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNONE (OLD)
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1None
Winding Thermal 2None
$
2,683.32
Qty:
$
1,594.76
Qty:
$
426.10
Qty:
Part #:334-RC100EZCR-TEF-GASKET
-
Part Number
RC100EZCR
Material
316 Stainless Steel
Seal
Buna-N
Size
1" (25mm)
Maximum Operating Pressure
250 PSI
Optional Pkg/Box Qty
10
Weight Lb
1.2000
$
80.35
Qty:
Part #:334-RD100EZ-TEF-GASKET
-
Part Number
RD100EZ
Material
316 Stainless Steel
Seal
Teflon
Size
1" (25mm)
Maximum Operating Pressure
250 PSI
Optional Pkg/Box Qty
10
Weight Lb
1.1400
$
77.99
Qty:
Part #:334-RD200EZ-TEF-GASKET
-
Part Number
RD200EZ
Material
316 Stainless Steel
Seal
Buna-N
Size
2" (50mm)
Maximum Operating Pressure
250 PSI
Optional Pkg/Box Qty
10
Weight Lb
2.3300
$
108.10
Qty:
Part #:334-SL075M
- Surelock&trade Male NPT End Attributes
Weight
0.52 lb
Size
3/4"
Material
Iron
Style
Small Head
Seal
Natural Rubber
Working Pressure
200 PSIG at 70°F (21°C)
$
7.31
Qty:
Part #:482-4343001204
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing.
SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes " to 4" and soft copper tubing in sizes " to 1".
After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements.
The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
12.84
Qty:
Part #:482-4343001208
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing.
SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes " to 4" and soft copper tubing in sizes " to 1".
After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements.
The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
28.97
Qty:
Part #:482-4343001210
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing.
SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes " to 4" and soft copper tubing in sizes " to 1".
After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements.
The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
40.19
Qty:
Part #:482-4343001920
- The SCI Press Technology for Copper Systems includes couplings, elbows, tees, adapters, reducers, caps, unions, and flanges for mechanical copper systems. They provide an economical and reliable piping connection that can be used for commercial, industrial, and residential markets eliminating the need of using conventional methods of soldering and brazing.
SCI Press Copper Fittings are intended for use with ASTM B88, Types K, L, and M hard copper tubing in sizes " to 4" and soft copper tubing in sizes " to 1".
After visual confirmation of each connection, a system pressure test may be performed in accordance with local code requirements.
The SCI Press Technology for Copper Systems is compatible with common pressing tools and jaws.
$
15.80
Qty:
Displaying: 1 - 24 of 2,885 Matching Items