Avery Products Corp
Armstrong International
View:
Active Filters :
Part #:334-2023R
- Pinch-On Double Ear Clamp Attributes
Weight
0.0138 lb
Mandatory Package/Box Quantity
100
Material
304 Stainless Steel
Nominal Size
7/8"
Range
.748" to .906"
$
1.35
Qty:
Part #:334-C18
- Grooved Standard Coupling- Series S, Style 11 Attributes
Maximum Operating Pressure
800 PSI at 70°F (21°C)
Weight
21.6 lb
Material
Ductile Iron
Max End Load
46741 lbs
Seal
EPDM
Nominal Size
8"
Pipe OD
8.625"
$
141.90
Qty:
Part #:501-D27091
- AEH Series Exhaust Heads Armstrongs AEH series carbon steel exhaust heads should be used when there is a risk of water carryover up an atmospheric vent pipe. The internal knock-out plate and stainless steel mesh screening effectively contains water carry-over and discharges it through the bottom drain leaving dry flash steam to vent through the top of the vessel.
Connections
• Flanged ASME B16.5 CL 150
• Drain FNPT
Qty:
Part #:501-D39126
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:501-D39127
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:334-G800T
- Grooved Fitting Gasket Attributes
Weight
0.652 lb
Size
8"
Material
Buna-N
Fuel Compatability
Gasoline and diesel
Color Code
1 Orange Stripe
Color
Black
Temperature Range
-24°F to 176°F (-31°C to 80°C)
$
24.01
Qty:
Part #:334-LW14200
- Fiberglass Sleeving
Attributes
Weight
4.62 lb
Break Quantity
0
Optional Package/Box Quantity
5
Material
Fiberglass
Wall Thickness
1/16"
Length
100'
Nominal ID
7/8" (22.2 mm)
Maximum Temperature
1000°F (538°C)
$
100.06
COIL
Qty:
Displaying: 1 - 7 of 7 Matching Items