Klein
Avery Products Corp
View:
Active Filters :
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:201202
- Comes with 5-1/4in HD Lid Only "Water" CLS 35 VBLIDHD35 Top 26in Botton 36in.
$
224.00
Qty:
Part #:204311
- Top 24in 19lbs, Bottom 39in 22lbs
Material Cast Iron Per ASTM A48 Class 30B
Screw Type Curb Box
$
117.70
Qty:
Part #:204343
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
$
7.00
Qty:
$
21.00
Qty:
Part #:500305
-
Soft and comfortable.
Fully attach ear canal.
Good noise canceling.
Sound attenuation data according to ANSI S3.19-1974 standards.
The NRR calculated from these laboratory-based attenuation data is 33 decibels (db).
Qty:
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:504778
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:507707
- Area of ApplicationArcal Weld-O is a ready-to-use X-Ray quality welding prep for aluminum and all grades of aluminum alloys. Weld-O is an innovative chemical formulation that consists of a blend of mineral acids, surface active and sequestering agents and degreasers.
Weld-O deoxidizes the surface instantly and conditions the surface for X-ray quality welding. The weld joint is cleaner and stronger. By using Weld-O, the need for wire brushing and other time consuming cleanup procedures are eliminated. A simple water rinse may be done but in many cases is not required.
Qty:
Part #:510041
- Radians Granite&trade Cap Style Hard Hats are comfortable and stylish, offering versatile protection. All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Features
Pillowed Brow Pad.
Nylon Crown Strap Suspensions.
Vertical Height Adjustment.
Quick Ratchet Adjustment System.
Easy Pinlock Adjustment System.
High Density Polyethylene Construction.
Universal Accessory Slots.
All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Made in the USA.
Qty:
Part #:510556
- Specifications Case Qty:
- 12 per box | 300 per case Case Weight
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:521546
- This popular style comes in a variety of different polycarbonate lenses to fit your application.
Lightweight, rimless design provides all day user comfort
Thin, flexible temples provide a secure fit without uncomfortable pressure points
Molded nose bridge design to fit the vast majority of users
9.5 Base curve lens
Meets ANSI Z87.1+
Part #:521547
- Radians Mirage RT&trade Safety Eyewear offers a sleek design which allows for a perfect fit. Rubber tipped temples keep safety glasses secure. The Mirage&trade family of safety eyewear is available in several styles, including rubber temples, foam lined and small sizes for all your safety glass needs.
Part #:800672
- The Neese Economy Series is basic rain wear to keep on hand for emergency weather conditions, and is made of durable water resistant PVC over polyester. The Economy Rain Coat is 48" in length and has a stand up collar and detachable hood.
PVC (.35mm) on Polyester
Stand-up collar with snaps and detachable hood
Raglan shoulder design with underarm vents
Vented upper back
Snap front closure
Lower front left and right side slash pockets
Coat is minimum of 48&rdquo long
Qty:
Part #:500283
- Stainless Steel Pocket Knife 1-5/8-Inch Steel Blade
&bullCompact and lightweight knife&bull Stainless steel handle and blade for long life&bull Rosewood handle inserts on both sides&bull Modified spearpoint blade locks open
The Klein Tools Compact Pocket Knife has a 1-5/8-Inch drop point stainless-steel retractable blade. The blade can be sharpened. The beautiful rosewood handle can insert on both sides of the knife.
Qty:
Part #:803341
- 2 Blade Pocket Knife, Steel, 2-1/2-Inch Blade
&bull Standard spearpoint blade 2-1/2-Inch (64 mm) long&bull Screwdriver-tip blade 2-1/2-Inch (64 mm) long&bull Screwdriver-tip blade locks open&bull Multi-purpose tool for everyday convenience&bull Handle is plastic with faux wood grain&bull Only 3.75-Inches (95.3 mm) closed&bull Blade is constructed of high quality carbon steel
Qty:
Part #:501695
- Scissors Holder Tunnel Connection
&bull Holds Klein's Electrician's Scissors (Cat. No. 2100-5 and 2100-7)&bull Tunnel loop to fit belts up to 2-Inches (51 mm) wide&bull Riveted leather construction for long life&bull Assembled in the USA of domestic and imported components
Qty:
Part #:505102
- Cable Cutter
&bull High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable&bull Precision, one-hand shearing action&bull Cable-gripping shear-type jaws&bull Perfect for working in confined spaces&bull Can be carried in most tool pouches&bull Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges&bull Through-hardened (not case-hardened) for longer-lasting cutting surfaces&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Custom, US-made tool steel&bull Has a jaw capacity of 1.06'' (26.9 mm)
Qty:
Part #:505271
- Ratcheting Cable Cutter
&bull Reduced hand force for easier cutting&bull Patented two-step ratchet mechanism requires fewer strokes per cut&bull Cuts up to 600 MCM Copper and 750 MCM Aluminum&bull Quick release lever opens blades easily in every cutting position, to allow removal of the cable before completion of cut&bull Hardened steel cutting blades for lasting strength and sharpness&bull Locking lever keeps handles closed for easy transport fits in a tool box or bag&bull New higher cutting capacity and reduced hand force make it easier to cut large diameter cables&bull Cable Cutter Replacement Part List available for reference if needed
Qty:
Part #:800583
- Lineman's Pliers, New England Nose, 7-Inch
&bull Streamlined design with sure-gripping, cross-hatched knurled jaws&bull Induction hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Unique handle tempering helps absorb the ''snap'' when cutting wire&bull Precision-hardened plier head for on-the-job toughness&bull Plastic-dipped handles for comfort and ease of identification&bull ''Handform'' handles for full gripping and cutting power&bull Custom, US-made tool steel forged for durability
Qty:
Displaying: 1 - 24 of 418 Matching Items