General Tool
Avery
View:
Active Filters :
Qty:
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
closeout
$94.22 MSRP
$
50.21
Part #:308114
- CLOSEOUTS Only 3 Left!
- In-Line Portable 15A GFCI, Manual Reset
In-line portable GFCI interrupter
Qty:
Part #:308442
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
Part #:220175
- Flat Boring Bit 6" Universal Set - 8PC
Get added convenience and reach with the Milwaukee® 8-Piece 6" Universal QUIK-LOK&trade Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK&trade allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case.
Qty:
Part #:805360
- 12" 10/14 TPI SAWZALL® Blades (5 Pk)
Milwaukee® designs and manufactures SAWZALL® blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize general purpose cutting performance.
Qty:
Part #:729-48-00-8712
- 6" 10 TPI The Torch&trade SAWZALL® Blades (25 Pk)
The Torch&trade metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form optimized for the longest life and maximum durability. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron&trade features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Qty:
Part #:729-2759-22
- M18 FUEL&trade with ONE-KEY&trade 1/2" Compact Impact Wrench w/ Pin Detent Kit (Discontinued, Replaced by 2759-20)
The M18 FUEL&trade 1/2&rdquo Compact Impact Wrench is the Most Powerful tool in its class, delivering up to 220 ft-lbs of torque in a compact design. The POWERSTATE&trade Brushless Motor not only provides unmatched power, but also greater efficiency, delivering up to 25% more run-time than the leading competitors. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM&trade Batteries deliver more work per charge and more work over the life of the pack than competitive batteries on the market.Compatible with ONE-KEY&trade, this is the industry&rsquos first Impact Wrench that wirelessly connects to a smart phone to Customize, Track and Manage a tool&rsquos performance and location. Unlimited Tool Customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. Once the desired output performance is reached, the custom profile is then saved to the memory of the tool and the connection to the smart phone is no longer necessary. The tool&rsquos memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated Tool Tracking, also available through ONE-KEY&trade, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY&trade compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you&rsquore having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY&trade app. By opting in, when any phone with the app comes within 100 ft of your tool, you will receive an updated location
Qty:
closeout
$203.00 MSRP
$
144.21
Part #:507361
- Availability: Will be backordered (Typically arrives in 10 days)
- 7.5 Amp 4-1/2" Small Angle Grinder (Discontinued, Being Replaced by 6141-30)
The 6140-30 4-1/2" 7.5 Amp Small Angle Grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Qty:
closeout
$494.00 MSRP
$
360.00
Part #:805309
- CLOSEOUTS Only 2 Left!
- M18&trade 1/2" Compact Hammer Drill/Driver Kit (Discontinued, Replaced by 2607-22CT Our Number 805306)
The most Hammer Drill/Driver in its class is more powerful than the competition. Built with a Milwaukee® 4-Pole frameless motor, the M18&trade 1/2" Hammer Drill/Driver delivers 525 in-lbs of torque and up to 1,800 RPM. At only 7-3/4" length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2" metal chuck provide maximum durability, even on the most challenging worksites. REDLINK&trade Intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. The REDLITHIUM&trade Battery Pack delivers more work per charge and more work over pack life than the competitors. The kit includes two M18&trade XC REDLITHIUM&trade batteries, an M18&trade and M12&trade multi-voltage charger, and a carrying case.
Qty:
Part #:805467
- M18 FUEL&trade 1/2" High Torque Impact Wrench w/ Friction Ring
Our M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE&trade Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with our M18&trade REDLITHIUM&trade FORGE&trade Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL&trade ½&rdquo High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. Our patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL&trade offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF&trade control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers our users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½&rdquo Friction Ring design allows for quick & tool-free socket changes.
Qty:
Part #:276722
- M18 FUEL&trade High Torque ½&rdquo Impact Wrench with Friction Ring Kit (Replaces 2767-22 & 2767-22R)
Our M18 FUEL&trade 1/2" High Torque Impact Wrench with Friction Ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. With 2X faster removal speed, our users will be able to get the job done faster and be more productive throughout their day. By providing the industry&rsquos most compact cordless High Torque Impact Wrench at 8.39&rdquo in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL&trade with Bolt Removal mode gives our users the most control over their fasteners. Bolt Removal mode gives the user more control when removing fasteners by slowing to 750rpm once the fastener has been busted loose. Our tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives our users ultimate comfort during prolonged use while lasting longer against corrosive materials. Our M18 REDLITHIUM&trade XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
Qty:
Part #:506987
- SHOCKWAVE&trade Impact Duty Drive and Fasten Set - 26PC
Milwaukee® SHOCKWAVE Impact Duty&trade Driver Bits, Nut Drivers, Sockets, and Socket Adapters are engineered for extreme durability and up to 10x life. Made from proprietary steel and heat treated to control hardness, the SHOCKWAVE Impact Duty&trade Driver Bits feature an innovatively designed geometric shock absorption zone to extend life. The forged tip allows for a secure grip and maximum contact eliminating stripping or slipping. . The SHOCKWAVE&trade 26PC Drive and Fasten Set provides a fastening solution for all standard hex sizes 1/4" to 9/16".
Qty:
Part #:300393
- Industrial Extra Heavy Duty Specification Grade Switch, Brown
One-piece toggle molded from chemical-,impact-,and heat-resistant thermoplastic.
Impact- and chemical-resistant cover.
Glass-reinforced, chemical-resistant thermoplastic back body for durability, strength, and resistance to harsh cleaners.
One-piece nickel-plated brass strap for superior corrosion-resistance.
Auto-ground clip assures positive ground.
Cam control and spring actuator for positive ''makes and breaks.''
Heavy-duty bumpers for quiet, smooth operation.
Locking support provides resistance to face and back body separation.
Oversized silver-alloy contacts for long life and better heat dissipation.
Side and external screw-pressure-plate back wire with #14 - #10 AWG copper or copper-clad wire.
Heavy-duty, brass alloy, one-piece contact arm virtually eliminates contact bounce.
Grounding terminal is standard with screw-pressure plate back wire.
Shallow design for easier installation.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Qty:
Part #:304701
- Weatherproof Cover for Flanged Inlet/Outlet
Unbreakable glass-filled polycarbonate construction to withstand years of job site abuse and harsh environmental exposure.
Stainless steel mounting screws also resist corrosion.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Molded-in label area (2.8 sq. in.) for pre-printed or handwritten labels for identification of circuits, ratings and other application data.
WPG1 and WPG2 have lockable bullnose for OSHA locktag/tagout compliance.
Covers fit all competitive inlets and outlets.
Pre-attached gaskets for easy installation and tight seal to panel or weatherproof box -- with no misaligned or collapsed gaskets.
Tamper-proof hinge features permanent, locked-in pins for added security.
cULus ListingNumber 143222
Qty:
Part #:307113
- 20A NEMA Plug L142
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
- Black Back, White Front Body
cULus ListingNumber 146159
Qty:
Part #:312810
- Industrial Extra Heavy Duty Specification Grade Switch, Brown
One-piece toggle molded from chemical-,impact-,and heat-resistant thermoplastic.
Impact- and chemical-resistant cover.
Glass-reinforced, chemical-resistant thermoplastic back body for durability, strength, and resistance to harsh cleaners.
One-piece nickel-plated brass strap for superior corrosion-resistance.
Auto-ground clip assures positive ground.
Cam control and spring actuator for positive ''makes and breaks.''
Heavy-duty bumpers for quiet, smooth operation.
Locking support provides resistance to face and back body separation.
Oversized silver-alloy contacts for long life and better heat dissipation.
Side and external screw-pressure-plate back wire with #14 - #10 AWG copper or copper-clad wire.
Heavy-duty, brass alloy, one-piece contact arm virtually eliminates contact bounce.
Grounding terminal is standard with screw-pressure plate back wire.
Shallow design for easier installation.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber
140597
cULus Listed
Yes
Qty:
Displaying: 1 - 24 of 817 Matching Items