Imark/edn Greenlee Textron
Baldor
View:
Active Filters :
Part #:200534
- Features and Advantages
&bull Sizes 3"-12" are Underwriters Laboratories Inc. Listed at 200 PSI for 3"-8" sizes and 175 PSI for 10"-12" sizes.For use on PC350 ductile iron and SCH40 steel pipe.&bull Bolt hole drilling is to ANSI B16.1 class 125.&bull Uses standard mechanical joint gasket for seal on DI Pipe and Transition Gasket on steel pipe.&bull Pipe fabrication can be done on site, using plain end pipe.&bull Flange Adapters are ideal for jobs involving retro-fitting.&bull Can be used on Ductile Iron (3"-36") and Steel (3"-12") Pipe -- steel pipe sizes require a transition gasket.&bull Can be used in above or below ground applications&bull If future maintenance is required, Flange Adapters can be easily disassembled.
Qty:
Part #:201202
- Comes with 5-1/4in HD Lid Only "Water" CLS 35 VBLIDHD35 Top 26in Botton 36in.
$
224.00
Qty:
Part #:204311
- Top 24in 19lbs, Bottom 39in 22lbs
Material Cast Iron Per ASTM A48 Class 30B
Screw Type Curb Box
$
117.70
Qty:
Part #:204343
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
Part #:204344
- Stargrip Series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Material Specifications&bull Gland Ductile Iron per ASTM A536, Grade 65-45-12&bull Wedges Ductile Iron per ASTM A536, Grade 65-45-12 heat treated to a minimum of 370 BHN Wedge Finish Thermally cured fluoropolymer epoxy coating
Qty:
$
1,436.54
Qty:
$
708.42
Qty:
Part #:302335
- .33HP, 1140RPM, 1PH, 60HZ, 56, 3424L, TEFC, F1
$
654.33
Qty:
Part #:302577
- .75HP, 1140RPM, 1PH, 60HZ, 56H, 3528LC, TEFC, F
$
1,072.97
Qty:
$
708.42
Qty:
$
787.22
Qty:
$
832.52
Qty:
$
854.17
Qty:
$
882.41
Qty:
$
951.35
Qty:
$
2,213.24
Qty:
Part #:302911
- 20HP, 1770RPM, 3PH, 60HZ, 256T, 0960M, TEFC, F1
Output20.000 hp
Phase3
Synchronous Speed1,800 rpm
Frequency60.00 Hz
Voltage230 V460 V
Frame MaterialIron
Frame256T
XP Class and GroupNONE
XP DivisionNot Applicable
BrandBaldor-Reliance
Agency ApprovalsCSACSA EEVUR
Ambient Temperature40 °C
Auxillary BoxNo Auxillary Box
Auxillary Box Lead TerminationNone
Base IndicatorRigid
Bearing Grease TypePOLYREX EM (-20F +300F)
BlowerNone
Current52.0 A @ 208 V48.0 A @ 230 V24.0 A @ 460 V
Design CodeA
Drip CoverNo Drip Cover
Duty RatingCONT
Efficiency @ 100% Load93.0%
Electrically Isolated BearingNot Electrically Isolated
Feedback DeviceNo feedback
Front Face CodeStandard
Front Shaft IndicatorNone
Heater IndicatorNo heater
High Voltage Full Load Amps24.0 A
Insulation ClassF
Inverter CodeInverter ready
KVA CodeJ
Lifting LugsStandard Lifting Lugs
Locked Bearing IndicatorLocked Bearing
Motor Lead ExitKO Box
Motor Lead Quantity/Wire Size9 @ 10 AWG
Motor Lead TerminationFlying Leads
Motor StandardsNEMA
Motor Type0960M
Number of Poles4
Overall Length23.28 in
Power Factor83
Product FamilyGeneral Purpose
Pulley End Bearing TypeBall
Pulley Face CodeStandard
Pulley Shaft IndicatorStandard
Rodent ScreenNone
Service Factor1.15
Shaft Diameter1.625 in
Shaft Extension LocationPulley End
Shaft Ground IndicatorNo Shaft Grounding
Shaft RotationReversible
Shaft Slinger IndicatorShaft Slinger
Speed1,770 rpm
Speed CodeSingle Speed
Starting MethodDirect on line
Thermal Device - BearingNONE (OLD)
Thermal Device - WindingNone
Vibration Sensor IndicatorNo Vibration Sensor
Winding Thermal 1None
Winding Thermal 2None
$
2,683.32
Qty:
$
1,594.76
Qty:
$
426.10
Qty:
$
7.00
Qty:
$
21.00
Qty:
Part #:502787
- Brute Vented Trash Receptacle, Round, 44 gal, Gray
Rounded handles make lifting and moving easier, and are reinforced to resist tearing or damage from even the heaviest loads.
Reinforced base is specifically engineered to be dragged over rough surfaces, extending life and overall durability even in the toughest environments.
Colors complement your facility's recycling, sortation, and organization needs.
Seamless construction makes cleaning the container easier.
Stackable design enables nesting for easy transport and storage.
Qty:
Part #:506147
- Hand-Held Cable Cutter
Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²)
Precision-ground, shear-action, curved cutting blades
727 has PVC-covered, high-leverage handles for easier cuts
Heat-treated for long life
Made of heavy-duty forged steel
Rust-resistant black oxide finish
$
39.05
Qty:
Displaying: 1 - 24 of 289 Matching Items