Basic
Dixon Valve & Coupling Company
View:
Active Filters :
- Brand: Dixon Valve & Coupling Company Basic J. H. Williams J.H. Williams
- Alt. Size: 1/4"
Part #:700306
- Female NPTF x Hose Barb Attributes
Weight
0.045 lb
Material
Brass
Female Thread
NPTF
Length
1.66"
Hose ID
1/4"
Hex
5/8"
Female Thread Size
1/4"
$
1.72
Qty:
Part #:703716
- Barbed Hose Mender Attributes
Weight
0.023 lb
Material
Brass
Length
2.03"
Hose ID
1/4"
$
1.35
Qty:
Part #:700291
- Male NPTF x Hose Barb Attributes
Weight
0.043 lb
Material
Brass
Male Thread
NPTF
Length
1.76"
Hose ID
1/4"
Hex
9/16"
Male Thread Size
1/4"
$
1.41
Qty:
Part #:500333
- 3 in 1 Manifold Attributes
Weight
0.17 lb
Material
Aluminum
Inlet
1/4" NPT
Outlet
(3) 1/4" NPT
$
9.31
Qty:
Part #:503696
- 1/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:334-DC20
- Air Chief Industrial Semi-Automatic Female Threaded Coupler Attributes
Weight
0.2 lb
Material
Brass
Thread
NPT
Body Size
1/4"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
1/4"
Flow
37 CFM at 100 PSI
Pressure Rating
300 PSI
$
8.16
Qty:
Part #:334-DCP20
- Air Chief Industrial Female Threaded Plug Attributes
Weight
0.05 lb
Material
Steel
Thread
NPT
Body Size
1/4"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
1/4"
Flow
37 CFM at 100 PSI
Pressure Rating
300 PSI
$
2.37
Qty:
Part #:334-DC21
- Air Chief Industrial Semi-Automatic Male Threaded Coupler Attributes
Weight
0.19 lb
Material
Brass
Thread
NPT
Body Size
1/4"
Temperature Range
-40°F to 250°F (-40°C to 121°C)
Thread Size
1/4"
Flow
37 CFM at 100 PSI
Pressure Rating
300 PSI
$
8.44
Qty:
Part #:501675
- 1/2" Drive SAE 1/4" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:810242
- 5" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:100087
- Clear PVC Tubing Attributes
Tube OD
3/8"
Weight
4.09 lb
Material
PVC
Tube ID
1/4"
Color
Clear
Working Pressure
85 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
0.57
Qty:
Part #:512613
-
Part Number
MSA
Material
Plated Steel Bar Stock
Male Thread
NPT
Male Thread Size
1/4" (6mm)
Hose Shank Size
1/4" (6mm)
Weight Lb
0.0700
$
11.54
Qty:
Part #:521535
- B07 Series 1 FRLs Miniature Filter/Regulator Attributes
Pressure Range
5-100 PSI
Weight
0.65 lb
Mandatory Package/Box Quantity
1
Inlet Pressure
150 PSI maximum
Maximum Temperature
125°F (51°C)
Flow
24 SCFM
Port
1/4"
$
86.98
Qty:
Part #:512590
- Steel 3500 Male Nipple Attributes
Weight
0.07 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
1/4"
Male Thread Size
1/4"
Pressure Rating
600 PSI at 70°F (21°C)
$
6.78
Qty:
Part #:334-AL-TPR25-30
- Turbo Nozzle Attributes
Maximum Operating Pressure
3,700 PSI
Weight
0.88 lb
Size
4.0
Color
Dark green
Orifice
1.30 mm
Maximum Temperature
212°F (100°C)
Inlet
1/4" female
Spray
20° spray angle
$
111.54
Qty:
Part #:502661
- Air King® 2-Lug Female NPT End Attributes
Weight
0.58 lb
Size
1/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.70
Qty:
Part #:506812
- Air King® 2-Lug Male NPT End Attributes
Weight
0.499 lb
Size
1/4"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
8.25
Qty:
Part #:334-1630400C
- Hex Head Plug Attributes
Weight
0.034 lb
Material
Brass
Male Thread
NPT
Length
.63"
Hex
9/16"
Male Thread Size
1/4"
$
1.41
Qty:
Part #:502010
- 3 7/8" Center Punches 1/4"
Pierces or marks work by indentation for starting pilot drills in metal or other materials
Qty:
Part #:814352
- U-Series Universal Pneumatic Female Threaded Coupler Attributes
Maximum Operating Pressure
300 PSI (20 bar)
Weight
0.23 lb
Material
Brass
Maximum OD
0.92"
Thread
NPT
Body Size
1/4"
Temperature Range
-40°F to +250°F (-40°C to +121°C)
Thread Size
1/4"
Length
2.32"
Hex
3/4"
$
14.39
Qty:
Part #:500370
- 1/4" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:503684
- 1/4" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:501425
- 1/4" Drive 12-Point SAE 1/4" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:811902
- 1/4" Drive 12-Point SAE 11/32" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Displaying: 1 - 24 of 49 Matching Items