Dixon Valve & Coupling Company
Bata
View:
Active Filters :
Part #:100183
- Clear PVC Tubing Attributes
Tube OD
3/4"
Weight
14.5 lb
Material
PVC
Tube ID
1/2"
Color
Clear
Working Pressure
85 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
1.54
Qty:
Part #:334-RC100EZCR-TEF-GASKET
-
Part Number
RC100EZCR
Material
316 Stainless Steel
Seal
Buna-N
Size
1" (25mm)
Maximum Operating Pressure
250 PSI
Optional Pkg/Box Qty
10
Weight Lb
1.2000
$
80.35
Qty:
Part #:334-RD100EZ-TEF-GASKET
-
Part Number
RD100EZ
Material
316 Stainless Steel
Seal
Teflon
Size
1" (25mm)
Maximum Operating Pressure
250 PSI
Optional Pkg/Box Qty
10
Weight Lb
1.1400
$
77.99
Qty:
Part #:334-RD200EZ-TEF-GASKET
-
Part Number
RD200EZ
Material
316 Stainless Steel
Seal
Buna-N
Size
2" (50mm)
Maximum Operating Pressure
250 PSI
Optional Pkg/Box Qty
10
Weight Lb
2.3300
$
108.10
Qty:
Part #:334-SL075M
- Surelock&trade Male NPT End Attributes
Weight
0.52 lb
Size
3/4"
Material
Iron
Style
Small Head
Seal
Natural Rubber
Working Pressure
200 PSIG at 70°F (21°C)
$
7.31
Qty:
$
57.70
Qty:
Part #:505934
- Boss® Ground Joint Stem Attributes
Weight
0.455 lb
Size
3/4" (20 mm)
Material
Plated Steel
$
12.85
Qty:
$
0.91
Qty:
$
2.24
Qty:
$
1.31
Qty:
$
1.88
Qty:
$
0.52
Qty:
$
1.56
Qty:
Part #:511262
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
Part #:511296
-
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
Part #:511332
-
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 °FIn-service temperature &ndash range-40 - 158 °FShelf life from date of manufacture (at 73°F/23°C and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with § 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$
81.77
Qty:
Part #:511731
-
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242
Manual hybrid/epoxy adhesive anchor dispenser
Dispenser typeManual
$
292.49
Qty:
$
44.92
Qty:
Part #:511740
-
Cartridge holder red HIT-CR 500 #2007059
$
45.81
Qty:
Part #:800025
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
250 PSI
Weight
1.26 lb
Size
2"
Material
Plated Malleable Iron
$
40.70
Qty:
Part #:811312
-
Part Number
100GTFVI
Material
PTFE (TFE) with FKM-A Filler
Color
White / Black
Color Code
1 yellow stripe
Size
1" (25mm)
Weight Lb
0.0200
$
12.99
Qty:
Part #:521536
- In-Line Lubricator Attributes
Maximum Operating Pressure
500 PSI at 70°F (21°C)
Weight
0.88 lb
Female Thread Size Metric
15mm
Material
Aluminum
Capacity
1.4 fluid oz. oil (40ml)
Female Thread
NPT
Flow
30 SCFM
Female Thread Size
1/2"
$
77.07
Qty:
Displaying: 1 - 24 of 860 Matching Items