Armstrong International
Bell and Gossett
View:
Active Filters :
- Brand: Bell and Gossett Armstrong International Hilti Neles Jamesbury
- Alt. Size: 3/4"
Part #:700031
- 3/4in Jamesbury 3000 Series Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball. PTFE seats with graphite seal. Jamesbury Part # MA0015380332236MLC
Qty:
Part #:700067
- 3/4in Jamesbury 3000 Series Fire-Tite Threaded Stainless Steel Ball Valve. Stainless steel body with stainless steel ball and stem. Filled PTFE seats with graphite seal. Jamesbury Part # MA0015383333600MLC
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
7.49
Qty:
Part #:508600
-
TE-CX (SDS Plus) Imperial hammer drill bitHammer drill bit TE-CX 3/4"-12" #2206742
Connection endTE-C (SDS Plus)Base materialReinforced concrete, Concrete, Brick, MasonryWorking modeHammer drillingHead shapeMulti CutterHead material compositionTungsten carbideNumber of cutting edges4Diameter3/4 inLength12 inWorking length10 inProduct ClassUltimate
$
83.81
Qty:
Qty:
Qty:
Qty:
Part #:713370
- Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available
Qty:
Part #:500201
- Kwik Bolt 1 carbon steel wedge anchor (Replaces KB3 282538)
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
14.63
Qty:
Part #:700215
- 3/4in Jamesbury Clincher Series 2000 2-Piece Threaded Ball Valve. Stainless steel body with stainless steel ball and stem. Seats and seals are filled PTFE. OBSOLETE. Jamesbury Part # 213600MTA0
Qty:
Part #:703240
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:704856
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:705117
- 3/4in Jamesbury 5000 Series 150lb Reduced Bore Flanged Ball Valve for Chlorine Application. Monel body with Monel and K Monel ball and stem. Seats are Jamesbury Modified Teflon.
THE 5000 SERIES BALL VALVES HAVE BEEN DISCONTINUED AND ARE NOT AVAILABLE ONCE INVENTORY IS GONE! REPLACEMENT VALVE AVAILABLE IN 7150 SERIES.
Qty:
Part #:706813
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:708695
- Bubble Tight Shut-off JAMESBURY DOUBLE-SEAL® Ball and WAFER-SPHERE® High Performance Butterfly Valves offer bubbletight shut-off which exceeds the requirements of ANSI/FCI 70 -2 Class VI. Cavity Pressure Relief In addition to their standard self-relieving seats, JAMESBURY DOUBLE-SEAL Ball Valves for Peroxide service have ball cavities vented to prevent entrapment of Peroxide fluid in the open or closed position. WAFER-SPHERE High Performance Butterfly Valves have no unvented cavities in normal operation. Peroxide Compatible Assembly and Testing Procedures Hydrogen Peroxide service requires assembly and test procedures that ensure that the finished product is completely free from all contaminants. JAMESBURY has worked with the major peroxide producers to develop assembly and packaging procedures that meet their industry requirements. Passivation Jamesbury Hydrogen Peroxide rated valves are passivated and tested according to ASTM A380 unless otherwise specified.:
Qty:
Part #:710064
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:710075
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
closeout
Part #:500191
- CLOSEOUTS Only 10 Left!
-
Kwik Bolt 3 Wedge anchor Exp anchor KB3 3/4" x 4-3/4" LT MC #3001006 (Discontinued)
High-performance wedge anchor with everyday approvals for uncracked concrete (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Approvals / Test reportsFM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedApprovals / Test reportsFM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)Base materialsConcrete (lightweight), Concrete (uncracked), Masonry (grout-filled CMU)Type of fixingPre-fastening, Through-fasteningDrilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Replacement 2231466 KB1 10/Box Carbon Steel Wedge Anchor
$
6.64
Qty:
Part #:500200
-
Kwik Bolt 3 Wedge anchor Exp anchor KB3 3/4" x 8" LT #282520
High-performance wedge anchor with everyday approvals for uncracked concrete (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Approvals / Test reportsFM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedApprovals / Test reportsFM (Factory Mutual), ICC-ES report (concrete), ICC-ES report (masonry), LABC, Nuclear (NQA-1), UL (Underwriter Laboratories)Base materialsConcrete (lightweight), Concrete (uncracked), Masonry (grout-filled CMU)Type of fixingPre-fastening, Through-fasteningDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench, TE 30-A36 Cordless rotary hammerPROFIS SoftwareYesProduct ClassPremium
$
10.39
Qty:
Part #:500196
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
9.32
Qty:
closeout
$
88.50
Qty:
Part #:511596
- Anchor rod HAS-E-55 5/8"x9" #2197996
Material, corrosionCarbon steel, zinc-platedWrench/nut size1-1/16 inPROFIS SoftwareYesType of fixingPre-fasteningProduct ClassPremium
Part #:501007
- Anchor rod HAS-E-55 3/4"x10" #2197999
High-performance anchor rod for adhesive capsules (carbon steel, ASTM F1554 grade 55, zinc-plated)
Material, corrosionCarbon steel, zinc-plated
Wrench/nut size1-1/4 in
PROFIS SoftwareYes
Part #:501-A21862
- CD-33 Series Disc Steam TrapFor steam service up to 600 psig (42 barg)
Capacities to 2,500 lb/hr (1,134 kg/hr).
The Armstrong CD-33 is a disc-style trap designed to control the traps cycle rate. By reducing the cycle rate, the Armstrong CD-33 extends its service life well beyond that of typical disc traps. This enhanced performance minimizes maintenance time and greatly reduces steam costs.
The CD-33 is designed with three discharge ports, which offer stable disc operation to extend operating life. The capacities of the Armstrong CD-33 have been engineered specifically for the following applications large steam main drips, process equipment and HVAC heating equipment on constant pressure.
The CD-33L (low capacity) trap is designed for the low capacity applications of steam main drips and steam tracing lines. By ensuring that the capacities are designed to suit the applicationand are not oversizedthe CD-33 Series will last longer than other disc traps with excessive capacity ratings. Heres why
• Three-discharge port design
• Minimum wear with controlled cycling
• Freeze resistant
• Hardened seat and disc
Qty:
Displaying: 1 - 24 of 518 Matching Items